Loading product vulnerabilities…
Total
100
Critical
1
High
25
Medium
62
CISA KEV
0
hw/pci/pcie_sriov.c in QEMU through 10.0.3 mishandles the VF Enable bit write mask, a related issue to CVE-2024-26327.
hw/pci/pcie_sriov.c in QEMU through 10.0.3 has a migration state inconsistency, a related issue to CVE-2024-26327.
A heap buffer overflow was found in the virtio-snd device in QEMU. When reading input audio in the virtio-snd input callback, virtio_snd_pcm_in_cb, the function did not check whether the iov can fit the data buffer. This issue can trigger an out-of-bounds write if the size of the virtio queue element is equal to virtio_snd_pcm_status, which makes the available space for audio data zero.
A heap-based buffer overflow was found in the SDHCI device emulation of QEMU. The bug is triggered when both `s->data_count` and the size of `s->fifo_buffer` are set to 0x200, leading to an out-of-bound access. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition.
A use-after-free vulnerability was found in the QEMU LSI53C895A SCSI Host Bus Adapter emulation. This issue can lead to a crash or VM escape.
A flaw was found in QEMU. An assertion failure was present in the usb_ep_get() function in hw/net/core.c when trying to get the USB endpoint from a USB device. This flaw may allow a malicious unprivileged guest user to crash the QEMU process on the host and cause a denial of service condition.
A flaw was found in the virtio-net device in QEMU. When enabling the RSS feature on the virtio-net network card, the indirections_table data within RSS becomes controllable. Setting excessively large values may cause an index out-of-bounds issue, potentially resulting in heap overflow access. This flaw allows a privileged user in the guest to crash the QEMU process on the host.
A flaw was found in QEMU. An assertion failure was present in the update_sctp_checksum() function in hw/net/net_tx_pkt.c when trying to calculate the checksum of a short-sized fragmented packet. This flaw allows a malicious guest to crash QEMU and cause a denial of service condition.
QEMU before 8.2.0 has an integer underflow, and resultant buffer overflow, via a TI command when an expected non-DMA transfer length is less than the length of the available FIFO data. This occurs in esp_do_nodma in hw/scsi/esp.c because of an underflow of async_len.
An issue was discovered in QEMU 7.1.0 through 8.2.1. register_vfs in hw/pci/pcie_sriov.c does not set NumVFs to PCI_SRIOV_TOTAL_VF, and thus interaction with hw/nvme/ctrl.c is mishandled.
An issue was discovered in QEMU 7.1.0 through 8.2.1. register_vfs in hw/pci/pcie_sriov.c mishandles the situation where a guest writes NumVFs greater than TotalVFs, leading to a buffer overflow in VF implementations.
A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. The qemu_clipboard_request() function can be reached before vnc_server_cut_text_caps() was called and had the chance to initialize the clipboard peer, leading to a NULL pointer dereference. This could allow a malicious authenticated VNC client to crash QEMU and trigger a denial of service.
A stack based buffer overflow was found in the virtio-net device of QEMU. This issue occurs when flushing TX in the virtio_net_flush_tx function if guest features VIRTIO_NET_F_HASH_REPORT, VIRTIO_F_VERSION_1 and VIRTIO_NET_F_MRG_RXBUF are enabled. This could allow a malicious user to overwrite local variables allocated on the stack. Specifically, the `out_sg` variable could be used to read a part of process memory and send it to the wire, causing an information leak.
A flaw was found in the 9p passthrough filesystem (9pfs) implementation in QEMU. The 9pfs server did not prohibit opening special files on the host side, potentially allowing a malicious client to escape from the exported 9p tree by creating and opening a device file in the shared folder.
A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot.
A flaw was found in QEMU. The async nature of hot-unplug enables a race scenario where the net device backend is cleared before the virtio-net pci frontend has been unplugged. A malicious guest could use this time window to trigger an assertion and cause a denial of service.
A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. A wrong exit condition may lead to an infinite loop when inflating an attacker controlled zlib buffer in the `inflate_buffer` function. This could allow a remote authenticated client who is able to send a clipboard to the VNC server to trigger a denial of service.
This CVE exists because of an incomplete fix for CVE-2021-3750. More specifically, the qemu-kvm package as released for Red Hat Enterprise Linux 9.1 via RHSA-2022:7967 included a version of qemu-kvm that was actually missing the fix for CVE-2021-3750.
QEMU through 8.0.0 could trigger a division by zero in scsi_disk_reset in hw/scsi/scsi-disk.c because scsi_disk_emulate_mode_select does not prevent s->qdev.blocksize from being 256. This stops QEMU and the guest immediately.
An issue was discovered in TCG Accelerator in QEMU 4.2.0, allows local attackers to execute arbitrary code, escalate privileges, and cause a denial of service (DoS). Note: This is disputed as a bug and not a valid security issue by multiple third parties.
The hardware emulation in the of_dpa_cmd_add_l2_flood of rocker device model in QEMU, as used in 7.0.0 and earlier, allows remote attackers to crash the host qemu and potentially execute code on the host via execute a malformed program in the guest OS. Note: This has been disputed by multiple third parties as not a valid vulnerability due to the rocker device not falling within the virtualization use case.
QEMU through 8.0.4 accesses a NULL pointer in nvme_directive_receive in hw/nvme/ctrl.c because there is no check for whether an endurance group is configured before checking whether Flexible Data Placement is enabled.
A heap out-of-bounds memory read flaw was found in the virtual nvme device in QEMU. The QEMU process does not validate an offset provided by the guest before computing a host heap pointer, which is used for copying data back to the guest. Arbitrary heap memory relative to an allocated buffer can be disclosed.
A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ.
A DMA reentrancy issue leading to a use-after-free error was found in the e1000e NIC emulation code in QEMU. This issue could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
A flaw was found in the 9p passthrough filesystem (9pfs) implementation in QEMU. When a local user in the guest writes an executable file with SUID or SGID, none of these privileged bits are correctly dropped. As a result, in rare circumstances, this flaw could be used by malicious users in the guest to elevate their privileges within the guest and help a host local user to elevate privileges on the host.
A flaw was found in the QEMU built-in VNC server. When a client connects to the VNC server, QEMU checks whether the current number of connections crosses a certain threshold and if so, cleans up the previous connection. If the previous connection happens to be in the handshake phase and fails, QEMU cleans up the connection again, resulting in a NULL pointer dereference issue. This could allow a remote unauthenticated client to cause a denial of service.
A flaw was found in the QEMU Guest Agent service for Windows. A local unprivileged user may be able to manipulate the QEMU Guest Agent's Windows installer via repair custom actions to elevate their privileges on the system.
A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. This flaw allows a crafted guest driver to allocate and initialize a huge number of page tables to be used as a ring of descriptors for CQ and async events, potentially leading to an out-of-bounds read and crash of QEMU.
A vulnerability in the lsi53c895a device affects the latest version of qemu. A DMA-MMIO reentrancy problem may lead to memory corruption bugs like stack overflow or use-after-free.
An integer overflow and buffer overflow issues were found in the ACPI Error Record Serialization Table (ERST) device of QEMU in the read_erst_record() and write_erst_record() functions. Both issues may allow the guest to overrun the host buffer allocated for the ERST memory device. A malicious guest could use these flaws to crash the QEMU process on the host.
An out-of-bounds read flaw was found in the QXL display device emulation in QEMU. The qxl_phys2virt() function does not check the size of the structure pointed to by the guest physical address, potentially reading past the end of the bar space into adjacent pages. A malicious guest user could use this flaw to crash the QEMU process on the host causing a denial of service condition.
An off-by-one read/write issue was found in the SDHCI device of QEMU. It occurs when reading/writing the Buffer Data Port Register in sdhci_read_dataport and sdhci_write_dataport, respectively, if data_count == block_size. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition.
An integer underflow issue was found in the QEMU VNC server while processing ClientCutText messages in the extended format. A malicious client could use this flaw to make QEMU unresponsive by sending a specially crafted payload message, resulting in a denial of service.
Qemu before 2.0 block driver for Hyper-V VHDX Images is vulnerable to infinite loops and other potential issues when calculating BAT entries, due to missing bounds checks for block_size and logical_sector_size variables. These are used to derive other fields like 'sectors_per_block' etc. A user able to alter the Qemu disk image could ise this flaw to crash the Qemu instance resulting in DoS.
Qemu before 1.6.2 block diver for the various disk image formats used by Bochs and for the QCOW version 2 format, are vulnerable to a possible crash caused by signed data types or a logic error while creating QCOW2 snapshots, which leads to incorrectly calling update_refcount() routine.
QEMU before 2.0.0 block drivers for CLOOP, QCOW2 version 2 and various other image formats are vulnerable to potential memory corruptions, integer/buffer overflows or crash caused by missing input validations which could allow a remote user to execute arbitrary code on the host with the privileges of the QEMU process.
A DMA reentrancy issue was found in the Tulip device emulation in QEMU. When Tulip reads or writes to the rx/tx descriptor or copies the rx/tx frame, it doesn't check whether the destination address is its own MMIO address. This can cause the device to trigger MMIO handlers multiple times, possibly leading to a stack or heap overflow. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition.
A flaw was found in the QEMU virtio-fs shared file system daemon (virtiofsd) implementation. This flaw is strictly related to CVE-2018-13405. A local guest user can create files in the directories shared by virtio-fs with unintended group ownership in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of the group. This could allow a malicious unprivileged user inside the guest to gain access to resources accessible to the root group, potentially escalating their privileges within the guest. A malicious local user in the host might also leverage this unexpected executable file created by the guest to escalate their privileges on the host system.
A use-after-free vulnerability was found in the LSI53C895A SCSI Host Bus Adapter emulation of QEMU. The flaw occurs while processing repeated messages to cancel the current SCSI request via the lsi_do_msgout function. This flaw allows a malicious privileged user within the guest to crash the QEMU process on the host, resulting in a denial of service.
A deadlock issue was found in the AHCI controller device of QEMU. It occurs on a software reset (ahci_reset_port) while handling a host-to-device Register FIS (Frame Information Structure) packet from the guest. A privileged user inside the guest could use this flaw to hang the QEMU process on the host, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability.
A DMA reentrancy issue was found in the NVM Express Controller (NVME) emulation in QEMU. This CVE is similar to CVE-2021-3750 and, just like it, when the reentrancy write triggers the reset function nvme_ctrl_reset(), data structs will be freed leading to a use-after-free issue. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition or, potentially, executing arbitrary code within the context of the QEMU process on the host.
A NULL pointer dereference issue was found in the ACPI code of QEMU. A malicious, privileged user within the guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition.
An infinite loop flaw was found in the USB xHCI controller emulation of QEMU while computing the length of the Transfer Request Block (TRB) Ring. This flaw allows a privileged guest user to hang the QEMU process on the host, resulting in a denial of service.
softmmu/physmem.c in QEMU through 7.0.0 can perform an uninitialized read on the translate_fail path, leading to an io_readx or io_writex crash. NOTE: a third party states that the Non-virtualization Use Case in the qemu.org reference applies here, i.e., "Bugs affecting the non-virtualization use case are not considered security bugs at this time.
A stack overflow vulnerability was found in the Intel HD Audio device (intel-hda) of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability. This flaw affects QEMU versions prior to 7.0.0.
A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be written to the controller's registers and trigger undesirable actions (such as reset) while the device is still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects QEMU versions before 7.0.0.
A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.
A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc() function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.
It was discovered that the update for the virt:rhel module in the RHSA-2020:4676 (https://access.redhat.com/errata/RHSA-2020:4676) erratum released as part of Red Hat Enterprise Linux 8.3 failed to include the fix for the qemu-kvm component issue CVE-2020-10756, which was previously corrected in virt:rhel/qemu-kvm via erratum RHSA-2020:4059 (https://access.redhat.com/errata/RHSA-2020:4059). CVE-2021-20295 was assigned to that Red Hat specific security regression. For more details about the original security issue CVE-2020-10756, refer to bug 1835986 or the CVE page: https://access.redhat.com/security/cve/CVE-2020-10756.
A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. This flaw allows a crafted guest driver to execute HW commands when shared buffers are not yet allocated, potentially leading to a use-after-free condition.
A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while handling a "PVRDMA_CMD_CREATE_MR" command due to improper memory remapping (mremap). This flaw allows a malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to system availability.
A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the descriptor's address belongs to the non direct access region, due to num_buffers being set after the virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a denial of service condition, or potentially execute code on the host with the privileges of the QEMU process.
A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results. Affected QEMU versions <= 6.2.0.
A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and other unexpected results. Affected QEMU version: 6.2.0.
An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
An out-of-bounds memory access flaw was found in the ATI VGA device emulation of QEMU. This flaw occurs in the ati_2d_blt() routine while handling MMIO write operations when the guest provides invalid values for the destination display parameters. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.
A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to 6.1.0. The issue occurs while handling a "PVRDMA_REG_DSRHIGH" write from the guest and may result in a crash of QEMU or cause undefined behavior due to the access of an uninitialized pointer. The highest threat from this vulnerability is to system availability.
An integer overflow was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to 6.1.0. The issue occurs while handling a "PVRDMA_REG_DSRHIGH" write from the guest due to improper input validation. This flaw allows a privileged guest user to make QEMU allocate a large amount of memory, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
A stack-buffer-overflow was found in QEMU in the NVME component. The flaw lies in nvme_changed_nslist() where a malicious guest controlling certain input can read out of bounds memory. A malicious user could use this flaw leading to disclosure of sensitive information.
An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
A NULL pointer dereference issue was found in the block mirror layer of QEMU in versions prior to 6.2.0. The `self` pointer is dereferenced in mirror_wait_on_conflicts() without ensuring that it's not NULL. A malicious unprivileged user within the guest could use this flaw to crash the QEMU process on the host when writing data reaches the threshold of mirroring node.
An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host.
A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata, resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the host.
A divide-by-zero issue was found in dwc2_handle_packet in hw/usb/hcd-dwc2.c in the hcd-dwc2 USB host controller emulation of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.
The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL dereference) when the command header 'ad->cur_cmd' is null.
An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process.
An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit this issue to leak memory from the host.
Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime.
A NULL pointer dereference flaw was found in the megasas-gen2 SCSI host bus adapter emulation of QEMU in versions before and including 6.0. This issue occurs in the megasas_command_cancelled() callback function while dropping a SCSI request. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
An user able to alter the savevm data (either on the disk or over the wire during migration) could use this flaw to to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.
A use-after-free vulnerability was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0 during the handling of the 'Information Transfer' command (CMD_TI). This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service or potential code execution with the privileges of the QEMU process.
A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a single, large transfer request, to reduce the overhead and improve performance. The combined size of the bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a denial of service.
A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while processing read/write ioport commands if the selected floppy drive is not initialized with a block device. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said issue while updating controller state fields and their subsequent processing. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as system availability.
A heap buffer overflow was found in the floppy disk emulator of QEMU up to 6.0.0 (including). It could occur in fdctrl_transfer_handler() in hw/block/fdc.c while processing DMA read data transfers from the floppy drive to the guest system. A privileged guest user could use this flaw to crash the QEMU process on the host resulting in DoS scenario, or potential information leakage from the host memory.
The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution. QEMU up to (including) 5.2.0 is affected by this.
A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req' from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the host resulting in DoS scenario.
A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
A flaw was found in the virtio-fs shared file system daemon (virtiofsd) of QEMU. The new 'xattrmap' option may cause the 'security.capability' xattr in the guest to not drop on file write, potentially leading to a modified, privileged executable in the guest. In rare circumstances, this flaw could be used by a malicious user to elevate their privileges within the guest.
An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
A heap-based buffer overflow was found in QEMU through 5.0.0 in the SDHCI device emulation support. It could occur while doing a multi block SDMA transfer via the sdhci_sdma_transfer_multi_blocks() routine in hw/sd/sdhci.c. A guest user or process could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code with privileges of the QEMU process on the host.
A flaw was found in qemu. A host privilege escalation issue was found in the virtio-fs shared file system daemon where a privileged guest user is able to create a device special file in the shared directory and use it to r/w access host devices.
ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer index is not validated.
iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose unrelated information from process memory to an attacker.
In QEMU 4.1.0, an out-of-bounds read flaw was found in the ATI VGA implementation. It occurs in the ati_cursor_define() routine while handling MMIO write operations through the ati_mm_write() callback. A malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.
A flaw was found in the memory management API of QEMU during the initialization of a memory region cache. This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial of service. This flaw affects QEMU versions prior to 5.2.0.
hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host, resulting in a denial of service.
hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host controller driver.
eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest can crash the QEMU process via packet data that lacks a valid Layer 3 protocol.
ati_2d_blt in hw/display/ati_2d.c in QEMU 4.2.1 can encounter an outside-limits situation in a calculation. A guest can crash the QEMU process.
An issue was discovered in QEMU through 5.1.0. An out-of-bounds memory access was found in the ATI VGA device implementation. This flaw occurs in the ati_2d_blt() routine in hw/display/ati_2d.c while handling MMIO write operations through the ati_mm_write() callback. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.
hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check before an ide_cancel_dma_sync call.
pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because pci_get_bus() might not return a valid pointer.
fdctrl_write_data in hw/block/fdc.c in QEMU 5.0.0 has a NULL pointer dereference via a NULL block pointer for the current drive.