WWBN AVideo is an open source video platform. In 29.0 and earlier, EpgParser.php, plugin/AI/receiveAsync.json.php, and other locations do not use the $resolvedIP out-param of isSSRFSafeURL() for DNS pinning via CURLOPT_RESOLVE, opening DNS-rebinding TOCTOU.

WWBN AVideo is an open source video platform. In 29.0 and earlier, there is a classic shell-metacharacter injection. The YPTSocket notification branch in plugin/Live/on_publish.php builds an execAsync() command line by string concatenation, single-quoting each argument but never calling escapeshellarg(). A ' in any of the three interpolated values ($users_id, $m3u8, $obj->liveTransmitionHistory_id) closes the quoted token and lets the attacker append arbitrary commands.

electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5.

electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. In 3.8.8 and earlier, there is persistent local-pty code execution via imported bookmarks or compromised sync targets. Affects users who import bookmark JSON files or who have electerm sync configured (gist/WebDAV). The attacker can inject exec* fields or global config to cause remote code to run when a bookmark is opened or when sync is applied.

In the Linux kernel, the following vulnerability has been resolved: cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated A chain of commits going back to v7.0 reworked rmdir to satisfy the controller invariant that a subsystem's ->css_offline() must not run while tasks are still doing kernel-side work in the cgroup. [1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out") [2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") [3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir") [4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition") [5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context") [1] moved task cset unlink from do_exit() to finish_task_switch() so a task's cset link drops only after the task has fully stopped scheduling. That made tasks past exit_signals() linger on cset->tasks until their final context switch, which led to a series of problems as what userspace expected to see after rmdir diverged from what the kernel needs to wait for. [2]-[5] tried to bridge that divergence: [2] filtered the exiting tasks from cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4] fixed the wait's condition; [5] made nr_dying_subsys_* visible synchronously. The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g. host PID 1 systemd reaping orphan pids that were re-parented to it during the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those pids to free, the pids can't free because PID 1 is the reaper and it's stuck in rmdir, and the system A-A deadlocks. No internal lock ordering breaks this; the wait itself is the bug. The css killing side that drove the original reorder, however, can be made cleanly asynchronous: ->css_offline() is already async, run from css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to make that chain start only after all tasks have left the cgroup. rmdir's user-visible side then returns as soon as cgroup.procs and friends are empty, while ->css_offline() still runs only after the cgroup is fully drained. Verified by the original reproducer (pidns teardown + zombie reaper, runs under vng) which hangs vanilla and succeeds here, and by per-commit deterministic repros for [2], [3], [4], [5] with a boot parameter that widens the post-exit_signals() window so each state is reliably reachable. Some stress tests on top of that. cgroup_apply_control_disable() has the same shape of pre-existing race: when a controller is disabled via subtree_control, kill_css() ran synchronously while tasks past exit_signals() could still be linked to the cgroup's csets, and ->css_offline() could fire before they drained. This patch preserves the existing synchronous behavior at that call site (kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch will defer kill_css_finish() there using a per-css trigger. This seems like the right approach and I don't see problems with it. The changes are somewhat invasive but not excessively so, so backporting to -stable should be okay. If something does turn out to be wrong, the fallback is to revert the entire chain ([1]-[5]) and rework in the development branch instead. v2: Pin cgrp across the deferred destroy work with explicit cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1 wasn't actually broken (ordered cgroup_offline_wq + queue_work order in cgroup_task_dead() saved it) but the explicit ref removes the dependency on those non-obvious invariants. Also note the pre-existing cgroup_apply_control_disable() race in the description; a follow-up will defer kill_css_finish() there.

linux

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix UAF in inactivity-timer cleanup path Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to both the probe close_hw error path and appletb_kbd_remove(), but the way it was wired in left the inactivity timer reachable during driver tear-down via two distinct windows. Window A -- put_device() before timer_delete_sync(): put_device(&kbd->backlight_dev->dev); timer_delete_sync(&kbd->inactivity_timer); The inactivity_timer softirq reads kbd->backlight_dev and calls backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a concurrent hid_appletb_bl unbind drops the last devm reference between these two calls, the backlight_device is freed and the mutex_lock() touches freed memory. Window B -- backlight cleanup before hid_hw_stop(): if (kbd->backlight_dev) { timer_delete_sync(...); put_device(...); } hid_hw_close(hdev); hid_hw_stop(hdev); Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run afterwards, so a late ".event" callback from the HID core (USB URB completion on real Apple hardware) can arrive after timer_delete_sync() drained the softirq but before put_device() drops the reference. That callback reaches reset_inactivity_timer(), which calls mod_timer() and re-arms the timer. The freshly re-armed timer can then fire on the about-to-be-freed backlight_device. Both windows produce the same KASAN slab-use-after-free: BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0 Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0 Call Trace: <IRQ> __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq handle_softirqs Allocated by task N: devm_backlight_device_register appletb_bl_probe Freed by task M: (concurrent hid_appletb_bl unbind path) Close both windows at once by reworking the tear-down in appletb_kbd_remove() and in the probe close_hw error path so that 1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup, guaranteeing no further .event callback can fire and re-arm the timer, and 2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync() runs before put_device(), so the softirq is drained before the final reference is dropped.

linux

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop tp_meter sessions during mesh teardown TP meter sessions remain linked on bat_priv->tp_list after the netlink request has already finished. When the mesh interface is removed, batadv_mesh_free() currently tears down the mesh without first draining these sessions. A running sender thread or a late incoming tp_meter packet can then keep processing against a mesh instance which is already shutting down. Synchronize tp_meter with the mesh lifetime by stopping all active sessions from batadv_mesh_free() and waiting for sender threads to exit before teardown continues.

linux

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: run inactivity autodim from workqueues The autodim code in hid-appletb-kbd takes backlight_device->ops_lock via backlight_device_set_brightness() -> mutex_lock() from two different atomic contexts: * appletb_inactivity_timer() is a struct timer_list callback, so it runs in softirq context. Every expiry triggers BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 Call Trace: <IRQ> __might_resched __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq * reset_inactivity_timer() is called from appletb_kbd_hid_event() and appletb_kbd_inp_event(). On real USB hardware these run in softirq/IRQ context (URB completion and input-event dispatch). When the Touch Bar has already been dimmed or turned off, the reset path calls backlight_device_set_brightness() directly to restore brightness, producing the same warning. Both call sites hit the same mutex_lock()-from-atomic bug. Fix them together by moving the blocking work onto the system workqueue: * Convert the inactivity timer from struct timer_list to struct delayed_work; the callback (appletb_inactivity_work) now runs in process context where mutex_lock() is legal. * Add a dedicated struct work_struct restore_brightness_work and have reset_inactivity_timer() schedule it instead of calling backlight_device_set_brightness() directly. Cancel both works synchronously during driver tear-down alongside the existing backlight reference drop. The semantics are unchanged (same delays, same state transitions on dim, turn-off and user activity); only the execution context of the sleeping call changes. The timer field and callback are renamed to match their new type; reset_inactivity_timer() keeps its name because it is invoked from input event paths that read naturally as "reset the inactivity timer".

linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix node_cnt race between extent node destroy and writeback f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing extent nodes. When called from f2fs_drop_inode() with I_SYNC set, concurrent kworker writeback can insert new extent nodes into the same extent tree, racing with the destroy and triggering f2fs_bug_on() in __destroy_extent_node(). The scenario is as follows: drop inode writeback - iput - f2fs_drop_inode // I_SYNC set - f2fs_destroy_extent_node - __destroy_extent_node - while (node_cnt) { write_lock(&et->lock) __free_extent_tree write_unlock(&et->lock) - __writeback_single_inode - f2fs_outplace_write_data - f2fs_update_read_extent_cache - __update_extent_tree_range // FI_NO_EXTENT not set, // insert new extent node } // node_cnt == 0, exit while - f2fs_bug_on(node_cnt) // node_cnt > 0 Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected. This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(), consistent with other callers (__update_extent_tree_range and __drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and EX_BLOCK_AGE tree.

linux

In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine.

linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC.

linux

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself".

linux

In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released.

linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: validate WMT event SKB length before struct access btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del().

systeminformation is a System and OS information library for node.js. From 4.17.0 to 5.31.5, on Linux, systeminformation is vulnerable to command injection in networkInterfaces() when an active NetworkManager connection profile name contains shell metacharacters. The vulnerable value is obtained internally from real nmcli device status output. The library sanitizes the network interface name before using it in shell commands, but it does not apply equivalent sanitization to the parsed NetworkManager connection profile name. That unsanitized connectionName is then interpolated into three shell command strings executed through execSync(). This vulnerability is fixed in 5.31.6.

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. On top of that, the DELETE /upi/v1/upNodesLinks/{upNodeRef} handler unconditionally dereferences upNode.UPF after the type-guarded async release, even though AN-typed nodes are constructed without a UPF object. As a result, a single unauthenticated DELETE /upi/v1/upNodesLinks/gNB1 request crashes the handler with a nil-pointer panic AND mutates the in-memory user-plane topology before panicking (the UpNodeDelete(upNodeRef) line runs first). This is an unauthenticated, state-mutating panic-DoS sink that an off-path network attacker can trigger by name against any AN entry. This vulnerability is fixed in 4.2.2.

free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF terminates the entire process when a stored PFD-subscription notifyUri cannot be reached. In PfdChangeNotifier.FlushNotifications(), the notifier calls NnefPFDmanagementNotify(...) and on any delivery error invokes logger.PFDManageLog.Fatal(err), which is os.Exit(1)-equivalent in Go. An attacker who can create a PFD subscription with an attacker-chosen notifyUri and then trigger a PFD change can deterministically kill NEF on the asynchronous delivery attempt -- the process exits with status 1, dropping NEF's entire SBI surface until restart. This vulnerability is fixed in 4.2.2.

free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's BSF PUT /nbsf-management/v1/subscriptions/{subId} handler has an unsynchronized write on the global Subscriptions map. The handler first reads the map under RLock() via BSFContext.GetSubscription(subId), but if the subscription does not exist, ReplaceIndividualSubcription() writes back to the same map directly without taking the mutex (bsfContext.BsfSelf.Subscriptions[subId] = subscription). Under concurrent authenticated PUT load, one goroutine can read while another writes the map, which causes the Go runtime to abort the process with fatal error: concurrent map read and map write (Go runtime panics that come from concurrent map access bypass recover() and terminate the process). The BSF container exits with code 2 -- the entire BSF SBI surface goes down until restart. This vulnerability is fixed in 4.2.2.

free5gc

Mattermost Plugins versions <=1.1.5 fail to sanitize filenames received from federated peers before using them to construct export destination paths, which allows an administrator of a remote federated Mattermost server to write files to arbitrary locations within the target server's filestore via a malicious filename delivered through the shared-channel attachment sync protocol. Mattermost Advisory ID: MMSA-2026-00659

In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized.