Misskey is an open source, federated social media platform. Versions 2025.3.2 and later, but prior to 2026.5.4, contain a vulnerability where a lack of proper permission checks allows access to certain data points from the Direct Messages (formerly Chat) feature, regardless of account permissions. This vulnerability occurs whether or not federation is enabled. Notes created with "specified" visibility (formerly "direct" visibility) are not affected. This issue has been fixed in version 2026.5.4.

A security flaw has been discovered in OpenAkita up to 1.27.12. This vulnerability affects unknown code of the file /api/upload of the component File Upload API. The manipulation of the argument File results in cross site scripting. The attack may be performed from remote. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787). The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write. The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation.

Guzzle is an extensible PHP HTTP client. Prior to 7.15.2 and 8.0.1, SetCookie::matchesDomain() gives every subdomain of a cookie Domain that cookie unless SetCookie::matchesDomain() recognizes the Domain as an IP literal or a numeric host, and the decision comes from the domain's own text, so two spellings a transport reads as an address keep subdomain scope. Hexadecimal and mixed-base forms such as 0x7f000001 and 0177.0.0.0x1 go unrecognized while libcurl 8.21.0 reads both as 127.0.0.1. A percent-escaped Domain keeps that scope on both branches because percent-decoding sits above numeric parsing, so 192.168.0.%31 and 127.0.0.1%2e are registered names in the URI grammar rather than address literals, and no numeric rule in any base classifies them, while libcurl decodes the host before resolving and reads them as 192.168.0.1 and 127.0.0.1. A cookie stored for Domain=0x7f000001 is placed in the Cookie header of a request to evil.0x7f000001, disclosing a session identifier or token to a host that is not that address, and a response from evil.0x7f000001 setting Domain=0x7f000001 is accepted into the jar and replayed to the address, so a server answering for the look-alike name can fix a session or set application state. Exploitation requires the application to enable cookie support, address an origin by one of these spellings, and contact a host whose name ends in that spelling. This issue is fixed in versions 7.15.2 and 8.0.1.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.3, an out-of-bounds heap read could occur in the C response parser while building an error message for a malformed response. An attacker controlled server, or possibly an accidental response, could trigger a DoS in the client. The vulnerable path was error message construction in aiohttp/_http_parser.pyx, where an llhttp error-position pointer was used to build a snippet for malformed chunked responses and malformed request or response bytes at the buffer end. This issue is fixed in version 3.14.3.

An issue in the CF_CFDP_RecvMd() component of NASA cFS v7.0.1 allows attackers to contrl where received content and data is stored, possibly leading to an information disclosure.

Emlog CMS <= 2.6.14 contains a stored cross-site scripting (XSS) vulnerability in the article publishing module (/admin/article.php). A remote authenticated attacker can inject arbitrary JavaScript code via the article content. When an administrator reviews or previews the submitted article in the backend, the malicious script executes in the admin's browser session, allowing the attacker to perform administrative actions such as creating a backdoor administrator account.

OPNsense before 26.1.9 contains a stored cross-site scripting vulnerability that allows authenticated attackers with firewall rule management privileges to inject arbitrary HTML or JavaScript by embedding payloads in the firewall rule description field via the filter API endpoint. The unsanitized description value is persisted and later rendered through the default cell formatter in opnsense_bootgrid.js, which assigns raw cell content to innerHTML, causing injected scripts to execute in the browser of any authenticated user who views the Firewall Rules page, enabling session hijacking or credential theft.

Shlink versions 5.0.0 through 5.1.5 contain a CSV formula injection vulnerability that allows unauthenticated remote attackers to plant spreadsheet formulas into exported visit data by supplying malicious values in User-Agent, Referer, or request path headers beginning with formula-triggering characters such as =, +, -, or @. Attackers can craft a single unauthenticated request against any short URL to embed DDE or WEBSERVICE formula payloads into CSV cells, which are then executed on an administrator's client machine when the exported CSV file is opened in a spreadsheet application that evaluates formulas.

Shlink contains a server-side request forgery vulnerability that allows authenticated API key holders to cause the server to issue arbitrary HTTP GET requests by supplying a crafted long URL during short URL creation with title auto-resolution enabled. Attackers can submit URLs pointing to public hosts that redirect to internal targets, including loopback addresses, link-local ranges, and cloud metadata endpoints such as 169.254.169.254, to exfiltrate internal service information via the HTML title element returned in the short URL creation response.

A security flaw has been discovered in danpros HTMLy up to 3.1.1. This affects the function add_content of the file /system/admin/admin.php of the component Admin Content Endpoint. Performing a manipulation of the argument oldfile results in path traversal. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.1.1 until 10.2.2, every special-use classification method is built on isInSubnet, which short-circuits to false whenever the address's own subnet mask is shorter than the reference range's mask. That mask comes verbatim from the CIDR suffix on the parsed input, so appending a suffix such as /0 suppresses classification entirely: isLoopback(), isPrivate(), isLinkLocal(), isCGNAT(), isMulticast(), isUnspecified(), isBroadcast(), isULA(), and getType() all report an internal address as unremarkable, while correctForm() and address still return the real internal target. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, may therefore treat an internal target as external and allow the request. The underlying bit comparison is correct, and mask(n) already returns the first n bits of the full parsed address independently of subnetMask; the defect is solely that the containment guard sits in the classification path. This issue is fixed in version 10.2.2.

ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1.

Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6.

Apache NiFi 2.0.0 through 2.10.0 support creating, reading, and deleting Assets associated with Parameter Contexts through the REST API. The framework authorizes asset deletion against the owning Parameter Context using the supplied Parameter Context Identifier and Asset Identifier. The framework performed authorized based on the supplied Parameter Context Identifier without verifying the requested Identifier against the stored Identifier. Apache NiFi installations that do not implement different levels of authorization across Parameter Contexts are not subject to this vulnerability, because the framework enforces write permissions as the security boundary. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, which verifies Parameter Context ownership of the requested Asset before deletion using the same strategy applied to Asset read operations.

apache

Emlog Pro through 2.6.23 contains a disabled TLS certificate validation vulnerability in include/service/ai.php that allows network-adjacent attackers to intercept outbound HTTPS requests to configured LLM providers by presenting arbitrary TLS certificates, as CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST are unconditionally disabled across sendStream(), sendImageRequest(), send(), and fetchSearchHtml() with no option to re-enable verification. Attackers can perform man-in-the-middle interception to extract Authorization Bearer API keys from every AI request and inject crafted AI responses that may be acted upon by the tool-call execution pipeline, including the query_database and update_config tool handlers.

Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in lud oaskit allows reflected cross-site scripting via the default HTML error handler. Oaskit.ErrorHandler.Default.format_reason/4 and Oaskit.ErrorHandler.Default.reason_to_html/1 in lib/oaskit/error_handler/default.ex render request-validation failures as an HTML page whenever the request's Accept header contains html, interpolating request-controlled strings into that page without HTML escaping. The unescaped values are object keys taken from a request body or from an object or deepObject query parameter, which appear in the JSON Schema error's instance path when a schema rejects them (for example under additionalProperties: false), and the raw Content-Type header, reflected in unsupported-media-type errors when it fails to parse. Because browsers send Accept: text/html on ordinary top-level navigation, a crafted GET link is sufficient to trigger the error page; no form submission, custom Content-Type, or attacker-controlled script on the victim's side is required. A payload such as filter[</code></h2><script>alert(document.domain)</script>]=x terminates the enclosing markup and the injected script executes in the origin of the application using oaskit, giving it access to that origin's cookies, session, and same-origin responses. Both HTML error rendering and the vulnerable handler are enabled by default: Oaskit.Plugs.ValidateRequest defaults :html_errors to true and :error_handler to Oaskit.ErrorHandler.Default, so applications following the documented usage are affected without any opt-in. This issue affects oaskit: from 0.1.0 before 0.14.1.

A security flaw has been discovered in langgenius dify up to 1.14.2. This issue affects the function jinja2.Template of the file api/core/helper/code_executor/jinja2/jinja2_transformer.py of the component Jinja2 Handler. The manipulation results in improper neutralization of special elements used in a template engine. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in GL-iNet GL-MT3000 up to 4.4.5. Impacted is the function s2s.enable_echo_server of the file /cgi-bin/glc of the component s2s.so Native Plugin. Performing a manipulation of the argument port results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability.

A race condition exists in the cloud-based Omada device adoption process when an attacker may be able to interact with the adoption workflow before a legitimate device completes registration, resulting in provisioning information being delivered to an attacker. Successful exploitation may allow disclosure of provisioning information intended for a legitimate device.

PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.19, if from is unset, an attacker can cause PreviousMap.loadFile() to read an unintended source-map file by supplying an absolute or directory-traversal sourceMappingURL. The resulting map’s sources and sourcesContent may then be exposed to the application. This issue is fixed in version 8.5.19.

postcss