An Improper Check for Unusual or Exceptional Conditions vulnerability in routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, logically adjacent BGP peer to cause Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when BGP rib-sharding and update-threading are configured, and a BGP peer flap is done with specific timing, rpd crashes and restarts. Continuous peer flapping at specific time intervals will result in a sustained Denial of Service (DoS) condition. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. The issue can occur with or without logical-systems enabled. This issue affects: Junos OS: * All versions before 20.4R3-S8, * 21.2 versions before 21.2R3-S6, * 21.3 versions before 21.3R3-S5, * 21.4 versions before 21.4R3-S4, * 22.1 versions before 22.1R3-S3, * 22.2 versions before 22.2R3-S1, * 22.3 versions before 22.3R3, * 22.4 versions before 22.4R3. Junos OS Evolved: * All versions before 21.2R3-S6-EVO, * 21.3-EVO versions before 21.3R3-S5-EVO, * 21.4-EVO versions before 21.4R3-S4-EVO, * 22.1-EVO versions before 22.1R3-S3-EVO, * 22.2-EVO versions before :22.2R3-S1-EVO, * 22.3-EVO versions before 22.3R3-EVO, * 22.4-EVO versions before 22.4R3-EVO.

juniper

A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause an FPC to crash, leading to Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, in an EVPN-VXLAN scenario, when specific ARP packets are received on an IPv4 network, or specific NDP packets are received on an IPv6 network, kernel heap memory leaks, which eventually leads to an FPC crash and restart. This issue does not affect MX Series platforms. Heap size growth on FPC can be seen using below command. user@host> show chassis fpc                     Temp CPU Utilization (%) CPU Utilization (%) Memory   Utilization (%) Slot State           (C) Total Interrupt     1min   5min   15min   DRAM (MB)   Heap   Buffer   0 Online           45     3         0       2       2      2       32768      19       0 <<<<<<< Heap increase in all fPCs This issue affects Junos OS: * All versions before 21.2R3-S7, * 21.4 versions before 21.4R3-S4, * 22.2 versions before 22.2R3-S1,  * 22.3 versions before 22.3R3-S1,  * 22.4 versions before 22.4R2-S2, 22.4R3. and Junos OS Evolved: * All versions before 21.2R3-S7-EVO, * 21.4-EVO versions before 21.4R3-S4-EVO, * 22.2-EVO versions before 22.2R3-S1-EVO,  * 22.3-EVO versions before 22.3R3-S1-EVO,  * 22.4-EVO versions before 22.4R3-EVO.

juniper

A Buffer Access with Incorrect Length Value vulnerability in the jdhcpd daemon of Juniper Networks Junos OS, when DHCP snooping is enabled, allows an unauthenticated, adjacent, attacker to send a DHCP packet with a malformed DHCP option to cause jdhcp to crash creating a Denial of Service (DoS) condition. Continuous receipt of these DHCP packets using the malformed DHCP Option will create a sustained Denial of Service (DoS) condition. This issue affects Junos OS: * from 23.1 before 23.2R2-S3, * from 23.4 before 23.4R2-S3, * from 24.2 before 24.2R2. This issue isn't applicable to any versions of Junos OS before 23.1R1. This issue doesn't affect vSRX Series which doesn't support DHCP Snooping. This issue doesn't affect Junos OS Evolved. There are no indicators of compromise for this issue.

juniper

Cross-Site Request Forgery (CSRF) vulnerability in Kevon Adonis WP Abstracts wp-abstracts-manuscripts-manager allows Cross Site Request Forgery.This issue affects WP Abstracts: from n/a through <= 2.7.5.

HCL DevOps Deploy / HCL Launch is vulnerable to HTML injection. This vulnerability may allow a user to embed arbitrary HTML tags in the Web UI potentially leading to sensitive information disclosure.

hcltechsw

canonical/get-workflow-version-action is a GitHub composite action to get commit SHA that GitHub Actions reusable workflow was called with. Prior to 1.0.1, if the get-workflow-version-action step fails, the exception output may include the GITHUB_TOKEN. If the full token is included in the exception output, GitHub will automatically redact the secret from the GitHub Actions logs. However, the token may be truncated—causing part of the GITHUB_TOKEN to be displayed in plaintext in the GitHub Actions logs. Anyone with read access to the GitHub repository can view GitHub Actions logs. For public repositories, anyone can view the GitHub Actions logs. The opportunity to exploit this vulnerability is limited—the GITHUB_TOKEN is automatically revoked when the job completes. However, there is an opportunity for an attack in the time between the GITHUB_TOKEN being displayed in the logs and the completion of the job. Users using the github-token input are impacted. This vulnerability is fixed in 1.0.1.

HCL DevOps Deploy / HCL Launch could allow unauthorized access to other services or potential exposure of sensitive data due to missing authentication in its Agent Relay service.

hcltechsw

A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. {{value}} ["%7b%7bvalue%7d%7d"])}]]

cisco

A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

cisco

A MongoDB server under specific conditions running on Linux with TLS and CRL revocation status checking enabled, fails to check the revocation status of the intermediate certificates in the peer's certificate chain. In cases of MONGODB-X509, which is not enabled by default, this may lead to improper authentication. This issue may also affect intra-cluster authentication. This issue affects MongoDB Server v5.0 versions prior to 5.0.31, MongoDB Server v6.0 versions prior to 6.0.20, MongoDB Server v7.0 versions prior to 7.0.16 and MongoDB Server v8.0 versions prior to 8.0.4. Required Configuration : MongoDB Server must be running on Linux Operating Systems and CRL revocation status checking must be enabled

mongodb

authentik is an open-source identity provider. Prior to versions 2024.12.4 and 2025.2.3, when authentik was configured to use the database for session storage (which is a non-default setting), deleting sessions via the Web Interface or the API would not revoke the session and the session holder would continue to have access to authentik. authentik 2025.2.3 and 2024.12.4 fix this issue. Switching to the cache-based session storage until the authentik instance can be upgraded is recommended. This will however also delete all existing sessions and users will have to re-authenticate.

goauthentik

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix a memory leak with reused mmap_offset drm_vma_node_allow() and drm_vma_node_revoke() should be called in balanced pairs. We call drm_vma_node_allow() once per-file everytime a user calls mmap_offset, but only call drm_vma_node_revoke once per-file on each mmap_offset. As the mmap_offset is reused by the client, the per-file vm_count may remain non-zero and the rbtree leaked. Call drm_vma_node_allow_once() instead to prevent that memory leak.

linux

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix the recovery flow of the UMR QP This patch addresses an issue in the recovery flow of the UMR QP, ensuring tasks do not get stuck, as highlighted by the call trace [1]. During recovery, before transitioning the QP to the RESET state, the software must wait for all outstanding WRs to complete. Failing to do so can cause the firmware to skip sending some flushed CQEs with errors and simply discard them upon the RESET, as per the IB specification. This race condition can result in lost CQEs and tasks becoming stuck. To resolve this, the patch sends a final WR which serves only as a barrier before moving the QP state to RESET. Once a CQE is received for that final WR, it guarantees that no outstanding WRs remain, making it safe to transition the QP to RESET and subsequently back to RTS, restoring proper functionality. Note: For the barrier WR, we simply reuse the failed and ready WR. Since the QP is in an error state, it will only receive IB_WC_WR_FLUSH_ERR. However, as it serves only as a barrier we don't care about its status. [1] INFO: task rdma_resource_l:1922 blocked for more than 120 seconds. Tainted: G W 6.12.0-rc7+ #1626 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:rdma_resource_l state:D stack:0 pid:1922 tgid:1922 ppid:1369 flags:0x00004004 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 schedule_timeout+0x280/0x300 ? mark_held_locks+0x48/0x80 ? lockdep_hardirqs_on_prepare+0xe5/0x1a0 wait_for_completion+0x75/0x130 mlx5r_umr_post_send_wait+0x3c2/0x5b0 [mlx5_ib] ? __pfx_mlx5r_umr_done+0x10/0x10 [mlx5_ib] mlx5r_umr_revoke_mr+0x93/0xc0 [mlx5_ib] __mlx5_ib_dereg_mr+0x299/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? __lock_acquire+0x64e/0x2080 ? mark_held_locks+0x48/0x80 ? find_held_lock+0x2d/0xa0 ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? __fget_files+0xc3/0x1b0 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f99c918b17b RSP: 002b:00007ffc766d0468 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc766d0578 RCX: 00007f99c918b17b RDX: 00007ffc766d0560 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffc766d0540 R08: 00007f99c8f99010 R09: 000000000000bd7e R10: 00007f99c94c1c70 R11: 0000000000000246 R12: 00007ffc766d0530 R13: 000000000000001c R14: 0000000040246a80 R15: 0000000000000000 </TASK>

linux

IBM UrbanCode Deploy (UCD) through 7.1.2.21, 7.2 through 7.2.3.14, and 7.3 through 7.3.2.0 / IBM DevOps Deploy 8.0 through 8.0.1.4 and 8.1 through 8.1 stores potentially sensitive authentication token information in log files that could be read by a local user.

ibm

IBM UrbanCode Deploy (UCD) 7.0 through 7.0.5.25, 7.1 through 7.1.2.21, 7.2 through 7.2.3.14, and 7.3 through 7.3.2.0 / IBM DevOps Deploy 8.0 through 8.0.1.4 and 8.1 through 8.1 is vulnerable to HTML injection. This vulnerability may allow a user to embed arbitrary HTML tags in the Web UI potentially leading to sensitive information disclosure.

ibm

IBM UrbanCode Deploy (UCD) 7.1 through 7.1.2.22, 7.2 through 7.2.3.15, and 7.3 through 7.3.2.10 / IBM DevOps Deploy 8.0 through 8.0.1.5 and 8.1 through 8.1.0.1 could allow unauthorized access to other services or potential exposure of sensitive data due to missing authentication in its Agent Relay service.

ibm

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Alex Mills SyntaxHighlighter Evolved syntaxhighlighter allows DOM-Based XSS.This issue affects SyntaxHighlighter Evolved: from n/a through <= 3.7.1.

HCL DevOps Deploy / HCL Launch stores potentially sensitive authentication token information in log files that could be read by a local user.

hcltechsw

Improper authorization in the variable component in Devolutions Remote Desktop Manager on Windows allows an authenticated user to use the ELEVATED_PASSWORD variable even though not allowed by the "Allow password in variable policy". This issue affects Remote Desktop Manager versions from 2025.1.24 through 2025.1.25, and all versions up to 2024.3.29.

devolutions

Insufficient logging in the autotyping feature in Devolutions Remote Desktop Manager on Windows allows an authenticated user to use a stored password without generating a corresponding log event, via the use of the autotyping functionality. This issue affects Remote Desktop Manager versions from 2025.1.24 through 2025.1.25, and all versions up to 2024.3.29.

devolutions

Improper authorization in application password policy in Devolutions Remote Desktop Manager on Windows allows an authenticated user to use a configuration different from the one mandated by the system administrators. This issue affects Remote Desktop Manager versions from 2025.1.24 through 2025.1.25, and all versions up to 2024.3.29.

devolutions

Client side access control bypass in the permission component in Devolutions Remote Desktop Manager on Windows. An authenticated user can exploit this flaw to bypass certain permission restrictions—specifically View Password, Edit Asset, and Edit Permissions by performing specific actions. This issue affects Remote Desktop Manager versions from 2025.1.24 through 2025.1.25, and all versions up to 2024.3.29.

devolutions

HCL DevOps Deploy / HCL Launch could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.

hcltechsw