In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_ras_init() When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function returns directly without freeing the allocated con structure, leading to a memory leak. Fix this by jumping to the release_con label to properly clean up the allocated memory before returning the error code. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values.

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req() The starfive_aes_aead_do_one_req() function allocates rctx->adata with kzalloc() but fails to free it if sg_copy_to_buffer() or starfive_aes_hw_init() fails, which lead to memory leaks. Since rctx->adata is unconditionally freed after the write_adata operations, ensure consistent cleanup by freeing the allocation in these earlier error paths as well. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix e4b bitmap inconsistency reports A bitmap inconsistency issue was observed during stress tests under mixed huge-page workloads. Ext4 reported multiple e4b bitmap check failures like: ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as per group info. But got 8192 blocks Analysis and experimentation confirmed that the issue is caused by a race condition between page migration and bitmap modification. Although this timing window is extremely narrow, it is still hit in practice: folio_lock ext4_mb_load_buddy __migrate_folio check ref count folio_mc_copy __filemap_get_folio folio_try_get(folio) ...... mb_mark_used ext4_mb_unload_buddy __folio_migrate_mapping folio_ref_freeze folio_unlock The root cause of this issue is that the fast path of load_buddy only increments the folio's reference count, which is insufficient to prevent concurrent folio migration. We observed that the folio migration process acquires the folio lock. Therefore, we can determine whether to take the fast path in load_buddy by checking the lock status. If the folio is locked, we opt for the slow path (which acquires the lock) to close this concurrency window. Additionally, this change addresses the following issues: When the DOUBLE_CHECK macro is enabled to inspect bitmap-related issues, the following error may be triggered: corruption in group 324 at byte 784(6272): f in copy != ff on disk/prealloc Analysis reveals that this is a false positive. There is a specific race window where the bitmap and the group descriptor become momentarily inconsistent, leading to this error report: ext4_mb_load_buddy ext4_mb_load_buddy __filemap_get_folio(create|lock) folio_lock ext4_mb_init_cache folio_mark_uptodate __filemap_get_folio(no lock) ...... mb_mark_used mb_mark_used_double mb_cmp_bitmaps mb_set_bits(e4b->bd_bitmap) folio_unlock The original logic assumed that since mb_cmp_bitmaps is called when the bitmap is newly loaded from disk, the folio lock would be sufficient to prevent concurrent access. However, this overlooks a specific race condition: if another process attempts to load buddy and finds the folio is already in an uptodate state, it will immediately begin using it without holding folio lock.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function allocates memory for the device path using kobject_get_path(). If the length of the device path exceeds the output buffer length, the function returns -ENOSPC but does not free the allocated memory, resulting in a memory leak. Add a kfree() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse() The function mtd_parser_tplink_safeloader_parse() allocates buf via mtd_parser_tplink_safeloader_read_table(). If the allocation for parts[idx].name fails inside the loop, the code jumps to the err_free label without freeing buf, leading to a memory leak. Fix this by freeing the temporary buffer buf in the err_free label. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix dirtyclusters double decrement on fs shutdown fstests test generic/388 occasionally reproduces a warning in ext4_put_super() associated with the dirty clusters count: WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4] Tracing the failure shows that the warning fires due to an s_dirtyclusters_counter value of -1. IOW, this appears to be a spurious decrement as opposed to some sort of leak. Further tracing of the dirty cluster count deltas and an LLM scan of the resulting output identified the cause as a double decrement in the error path between ext4_mb_mark_diskspace_used() and the caller ext4_mb_new_blocks(). First, note that generic/388 is a shutdown vs. fsstress test and so produces a random set of operations and shutdown injections. In the problematic case, the shutdown triggers an error return from the ext4_handle_dirty_metadata() call(s) made from ext4_mb_mark_context(). The changed value is non-zero at this point, so ext4_mb_mark_diskspace_used() does not exit after the error bubbles up from ext4_mb_mark_context(). Instead, the former decrements both cluster counters and returns the error up to ext4_mb_new_blocks(). The latter falls into the !ar->len out path which decrements the dirty clusters counter a second time, creating the inconsistency. To avoid this problem and simplify ownership of the cluster reservation in this codepath, lift the counter reduction to a single place in the caller. This makes it more clear that ext4_mb_new_blocks() is responsible for acquiring cluster reservation (via ext4_claim_free_clusters()) in the !delalloc case as well as releasing it, regardless of whether it ends up consumed or returned due to failure.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set.

In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix memory leak in raid1_run() raid1_run() calls setup_conf() which registers a thread via md_register_thread(). If raid1_set_limits() fails, the previously registered thread is not unregistered, resulting in a memory leak of the md_thread structure and the thread resource itself. Add md_unregister_thread() to the error path to properly cleanup the thread, which aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: arm64/gcs: Fix error handling in arch_set_shadow_stack_status() alloc_gcs() returns an error-encoded pointer on failure, which comes from do_mmap(), not NULL. The current NULL check fails to detect errors, which could lead to using an invalid GCS address. Use IS_ERR_VALUE() to properly detect errors, consistent with the check in gcs_alloc_thread_stack().

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() pqi_report_phys_luns() fails to release the rpl_list buffer when encountering an unsupported data format or when the allocation for rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic, leading to memory leaks. Consolidate the error handling by adding an out_free_rpl_list label and use goto statements to ensure rpl_list is consistently freed on failure. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix refcount leak in pcs_add_gpio_func() of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review.

In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx() tty = ser->tty // dangling ptr tty->ops->write() // UAF! schedule_work() ser_release() unregister_netdevice() The root cause is that tty_kref_put() is called in ldisc_close() while the network device is still active and can receive packets. Since ser and tty have a 1:1 binding relationship with consistent lifecycles (ser is allocated in ldisc_open and freed in ser_release via unregister_netdevice, and each ser binds exactly one tty), we can safely defer the tty reference release to ser_release() where the network device is unregistered. Fix this by moving tty_kref_put() from ldisc_close() to ser_release(), after unregister_netdevice(). This ensures the tty reference is held as long as the network device exists, preventing the UAF. Note: We save ser->tty before unregister_netdevice() because ser is embedded in netdev's private data and will be freed along with netdev (needs_free_netdev = true). How to reproduce: Add mdelay(500) at the beginning of ldisc_close() to widen the race window, then run the reproducer program [1]. Note: There is a separate deadloop issue in handle_tx() when using PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper serial backend). This deadloop exists even without this patch, and is likely caused by inconsistency between uart_write_room() and uart_write() in serial core. It has been addressed in a separate patch [2]. KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620 Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xd0/0x630 kasan_report+0xe4/0x120 handle_tx+0x5d1/0x620 dev_hard_start_xmit+0x9d/0x6c0 __dev_queue_xmit+0x6e2/0x4410 packet_xmit+0x243/0x360 packet_sendmsg+0x26cf/0x5500 __sys_sendto+0x4a3/0x520 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0xc9/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f615df2c0d7 Allocated by task 9930: Freed by task 64: Last potentially related work creation: The buggy address belongs to the object at ffff8881131e1000 which belongs to the cache kmalloc-cg-2k of size 2048 The buggy address is located 1168 bytes inside of freed 2048-byte region [ffff8881131e1000, ffff8881131e1800) The buggy address belongs to the physical page: page_owner tracks the page as allocated page last free pid 9778 tgid 9778 stack trace: Memory state around the buggy address: ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb [2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u

In the Linux kernel, the following vulnerability has been resolved: i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers() The dw_i3c_master_i2c_xfers() function allocates memory for the xfer structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get() fails, the function returns without freeing the allocated xfer, resulting in a memory leak. Add a dw_i3c_master_free_xfer() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).

In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - unregister only available algorithm EIP93 has an options register. This register indicates which crypto algorithms are implemented in silicon. Supported algorithms are registered on this basis. Unregister algorithms on the same basis. Currently, all algorithms are unregistered, even those not supported by HW. This results in panic on platforms that don't have all options implemented in silicon.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review.

IBM Netezza Performance Server Replication Services 3.0.2.0 through 3.0.5.0 allows an attacker with low‑privileged access to escalate their privileges to root. By exploiting this flaw, the attacker can execute root‑level commands, obtain a root shell, and change the root user’s password. Successful exploitation also enables modification or removal of system‑wide files and the installation of persistent backdoors. This results in full system compromise with complete loss of confidentiality, integrity, and availability.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix deadlock in ni_read_folio_cmpr Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr). This is caused by a lock inversion deadlock involving the inode mutex (ni_lock) and page locks. Scenario: 1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock. 2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in the compressed frame (including page Y). 3. Concurrently, Task B (e.g., via readahead) has locked page Y and calls ntfs_read_folio(). 4. Task B waits for ni_lock (held by A). 5. Task A waits for page Y lock (held by B). -> DEADLOCK. The fix is to restructure locking: do not take ni_lock in ntfs_read_folio(). Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required page locks for the frame have been successfully acquired. This restores the correct lock ordering (Page Lock -> ni_lock) consistent with VFS. [almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]

IBM Operations Analytics - Log Analysis 1.3.5.0, 1.3.5.1, 1.3.5.2, 1.3.5.3, 1.3.6.0, 1.3.6.1, 1.3.7.0, 1.3.7.1, 1.3.7.2, and 1.3.8.0, 1.3.8.1, 1.3.8.2, 1.3.8.3, 1.3.8.4 IBM SmartCloud Analytics - Log Analysis does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts.

In the Linux kernel, the following vulnerability has been resolved: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst() bareudp_fill_metadata_dst() passes bareudp->sock to udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check. The socket is only created in bareudp_open() and NULLed in bareudp_stop(), so calling this function while the device is down triggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: <TASK> bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths in the same driver.