In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.

linux

In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup.

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

linux

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted]

linux

facil.io is a C micro-framework for web applications. Prior to commit 5128747363055201d3ecf0e29bf0a961703c9fa0, `fio_json_parse` can enter an infinite loop when it encounters a nested JSON value starting with `i` or `I`. The process spins in user space and pegs one CPU core at ~100% instead of returning a parse error. Because `iodine` vendors the same parser code, the issue also affects `iodine` when it parses attacker-controlled JSON. The smallest reproducer I found is `[i`. The quoted-value form that originally exposed the issue, `[""i`, reaches the same bug because the parser tolerates missing commas and then treats the trailing `i` as the start of another value. Commit 5128747363055201d3ecf0e29bf0a961703c9fa0 fixes the issue.

The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Processing a malformed input containing a < character that is not followed by a > character anywhere in the remaining text with a SmartypantsRenderer will lead to Out of Bounds read or a panic. This vulnerability is fixed with commit 759bbc3e32073c3bc4e25969c132fc520eda2778.

gomarkdown

Nest is a framework for building scalable Node.js server-side applications. Prior to 11.1.19, when an attacker sends many small, valid JSON messages in one TCP frame, handleData() recurses once per message; the buffer shrinks each call. maxBufferSize is never reached; call stack overflows instead. A ~47 KB payload is sufficient to trigger RangeError. This vulnerability is fixed in 11.1.19.

nestjs

UltraDAG is a minimal DAG-BFT blockchain in Rust. In version 0.1, a non-council attacker can submit a signed SmartOp::Vote transaction that passes signature, nonce, and balance prechecks, but fails authorization only after state mutation has already occurred.

ultradag

FreeScout is a free self-hosted help desk and shared mailbox. Prior to version 1.8.213, attachment download tokens are generated using a weak and predictable formula: `md5(APP_KEY + attachment_id + size)`. Since attachment_id is sequential and size can be brute-forced in a small range, an unauthenticated attacker can forge valid tokens and download any private attachment without credentials. Version 1.8.213 fixes the issue.

freescout

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.3, `ExtractPluginFromImage()` in OpenBao's OCI plugin downloader extracts a plugin binary from a container image by streaming decompressed tar data via `io.Copy` with no upper bound on the number of bytes written. An attacker who controls or compromises the OCI registry referenced in the victim's configuration can serve a crafted image containing a decompression bomb that decompresses to an arbitrarily large file. The SHA256 integrity check occurs after the full file is written to disk, meaning the hash mismatch is detected only after the damage (disk exhaustion) has already occurred. This allow the attacker to replace **legit plugin image** with no need to change its signature. Version 2.5.3 contains a patch.

openbao

In the Linux kernel, the following vulnerability has been resolved: net: skb: fix cross-cache free of KFENCE-allocated skb head SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2 value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc bucket sizes. This ensures that skb_kfree_head() can reliably use skb_end_offset to distinguish skb heads allocated from skb_small_head_cache vs. generic kmalloc caches. However, when KFENCE is enabled, kfence_ksize() returns the exact requested allocation size instead of the slab bucket size. If a caller (e.g. bpf_test_init) allocates skb head data via kzalloc() and the requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then slab_build_skb() -> ksize() returns that exact value. After subtracting skb_shared_info overhead, skb_end_offset ends up matching SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free the object to skb_small_head_cache instead of back to the original kmalloc cache, resulting in a slab cross-cache free: kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected skbuff_small_head but got kmalloc-1k Fix this by always calling kfree(head) in skb_kfree_head(). This keeps the free path generic and avoids allocator-specific misclassification for KFENCE objects.

linux

Hot Chocolate is an open-source GraphQL server. Prior to versions 12.22.7, 13.9.16, 14.3.1, and 15.1.14, Hot Chocolate's recursive descent parser `Utf8GraphQLParser` has no recursion depth limit. A crafted GraphQL document with deeply nested selection sets, object values, list values, or list types can trigger a `StackOverflowException` on payloads as small as 40 KB. Because `StackOverflowException` is uncatchable in .NET (since .NET 2.0), the entire worker process is terminated immediately. All in-flight HTTP requests, background `IHostedService` tasks, and open WebSocket subscriptions on that worker are dropped. The orchestrator (Kubernetes, IIS, etc.) must restart the process. This occurs before any validation rules run — `MaxExecutionDepth`, complexity analyzers, persisted query allow-lists, and custom `IDocumentValidatorRule` implementations cannot intercept the crash because `Utf8GraphQLParser.Parse` is invoked before validation. The `MaxAllowedFields=2048` limit does not help because the crashing payloads contain very few fields. The fix in versions 12.22.7, 13.9.16, 14.3.1, and 15.1.14 adds a `MaxAllowedRecursionDepth` option to `ParserOptions` with a safe default, and enforces it across all recursive parser methods (`ParseSelectionSet`, `ParseValueLiteral`, `ParseObject`, `ParseList`, `ParseTypeReference`, etc.). When the limit is exceeded, a catchable `SyntaxException` is thrown instead of overflowing the stack. There is no application-level workaround. `StackOverflowException` cannot be caught in .NET. The only mitigation is to upgrade to a patched version. Operators can reduce (but not eliminate) risk by limiting HTTP request body size at the reverse proxy or load balancer layer, though the smallest crashing payload (40 KB) is well below most default body size limits and is highly compressible (~few hundred bytes via gzip).

xrdp is an open source RDP server. Versions through 0.10.5 allow an authenticated remote user to execute arbitrary commands on the server due to unsafe handling of the AlternateShell parameter in xrdp-sesman. When the AllowAlternateShell setting is enabled (which is the default when not explicitly configured), xrdp accepts a client-supplied AlternateShell value and executes it via /bin/sh -c during session initialization. This results in shell-interpreted execution of unsanitized, user-controlled input. This behavior effectively provides a scriptable remote command execution primitive over RDP within the security context of the authenticated user, occurring prior to normal window manager startup. This can bypass expected session initialization flows and operational assumptions that restrict execution to interactive desktop environments. This issue has been fixed in version 0.10.6.

neutrinolabs

A flaw was found in dnsmasq. A remote attacker could exploit an out-of-bounds write vulnerability by sending a specially crafted BOOTREPLY (Bootstrap Protocol Reply) packet to a dnsmasq server configured with the `--dhcp-split-relay` option. This can lead to memory corruption, causing the dnsmasq daemon to crash and resulting in a denial of service (DoS).

spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.

@fastify/static versions 8.0.0 through 9.1.0 decode percent-encoded path separators (%2F) before filesystem resolution, while Fastify's router treats them as literal characters. This mismatch allows attackers to bypass route-based middleware or guards that protect files served by @fastify/static. For example, a route guard on a protected path can be circumvented by encoding the path separator in the URL. Upgrade to @fastify/static 9.1.1 to fix this issue. There are no workarounds.

fastify

The Prismatic plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'prismatic_encoded' pseudo-shortcode in all versions up to, and including, 3.7.3. This is due to insufficient input sanitization and output escaping on user-supplied attributes within the 'prismatic_decode' function. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page by submitting a comment containing a crafted 'prismatic_encoded' pseudo-shortcode.

In Wago Smart Designer in versions up to 2.33.1 a low privileged remote attacker may enumerate projects and usernames through iterative requests to an specific endpoint.

Cross-Site Request Forgery (CSRF) vulnerability in ZAYTECH Smart Online Order for Clover clover-online-orders allows Cross Site Request Forgery.This issue affects Smart Online Order for Clover: from n/a through <= 1.6.0.

The Accessibly plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the REST API in all versions up to, and including, 3.0.3. The plugin registers REST API endpoints at `/otm-ac/v1/update-widget-options` and `/otm-ac/v1/update-app-config` with the `permission_callback` set to `__return_true`, which means no authentication or authorization check is performed. The `updateWidgetOptions()` function in `AdminApi.php` accepts user-supplied JSON data and passes it directly to `AccessiblyOptions::updateAppConfig()`, which saves it to the WordPress options table via `update_option()` without any sanitization or validation. The stored `widgetSrc` value is later retrieved by `AssetsManager::enqueueFrontendScripts()` and passed directly to `wp_enqueue_script()` as the script URL, causing it to be rendered as a `<script>` tag on every front-end page. This makes it possible for unauthenticated attackers to inject arbitrary JavaScript that executes for all site visitors by changing the `widgetSrc` option to point to a malicious external script.

The Smart Post Show – Post Grid, Post Carousel & Slider, and List Category Posts plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.0.12 via deserialization of untrusted input in the import_shortcodes() function. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

jq is a command-line JSON processor. Before commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784, jq used MurmurHash3 with a hardcoded, publicly visible seed (0x432A9843) for all JSON object hash table operations, which allowed an attacker to precompute key collisions offline. By supplying a crafted JSON object (~100 KB) where all keys hashed to the same bucket, hash table lookups degraded from O(1) to O(n), turning any jq expression into an O(n²) operation and causing significant CPU exhaustion. This affected common jq use cases such as CI/CD pipelines, web services, and data processing scripts, and was far more practical to exploit than existing heap overflow issues since it required only a small payload. This issue has been patched in commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784.