Insufficient input validation vulnerability in NETGEAR JR6150 (AC750 WiFi Router 802.11ac Dual Band Gigabit released in 2014) allows administrators connected to the local network to make unauthorized modification of router software and functionality. NETGEAR JR6150 reached End-of-Support status in 2018 and is no longer receiving security updates. NETGEAR strongly recommends replacing these devices with newer NETGEAR models to ensure continued security support and updates. This vulnerability has been identified through firmware emulation in a controlled research environment and has not been verified on production hardware.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs. If the loaded scheduler is disabled and freed (via RCU work) and another is enabled between the naked load and the rwsem acquire, the reader sees scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one - UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...). scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write (scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section correlates @sch with the enabled snapshot.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use.

A security flaw has been discovered in Edimax BR-6675nD 1.12. This affects the function formHwSet of the file /goform/formHwSet of the component POST Request Handler. The manipulation of the argument regDomain/ABandregDomain/nic0Addr/nic1Addr/wlanAddr/inicAddr results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

SOGo versions 5.12.7 and prior contains a SQL injection vulnerability in the Access Control List management functionality that allows authenticated users to extract arbitrary data from the database by injecting SQL subqueries through the uid parameter of the addUserInAcls endpoint. Attackers can inject malicious SQL code to write extracted data into the sogo_acl table and retrieve it through the /acls API, establishing an out-of-band data exfiltration channel.

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

openimageio

HCL AION is affected by a vulnerability where certain operations may trigger out-of-band interactions, potentially resulting in unintended disclosure of sensitive information. Such behaviour may allow exposure of data to external systems under specific conditions.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in mtrudel bandit allows unauthenticated remote denial of service via worker process exhaustion. 'Elixir.Bandit.HTTP1.Socket':do_read_chunked_data!/5 in lib/bandit/http1/socket.ex terminates only when the last-chunk line 0\r\n is followed immediately by the empty trailer line \r\n. RFC 9112 §7.1.2 permits zero or more trailer fields between them. When trailers are present, none of the match clauses fit: the catch-all arm computes a negative to_read, calls read_available!/2, receives <<>> on timeout, and tail-recurses with unchanged state. The worker process is pinned for the lifetime of the TCP connection. A handful of concurrent connections sending RFC-conformant chunked requests with trailer fields is sufficient to exhaust the Bandit worker pool and render the server unresponsive to all further traffic. No authentication, special headers, or large payload is required. Proxies such as NGINX and HAProxy legitimately forward trailer-bearing requests, so servers behind such proxies may be affected without any malicious client involvement. This issue affects bandit: from 1.6.1 before 1.11.1.

mtrudel

Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion. The chunked clause of 'Elixir.Bandit.HTTP1.Socket':read_data/2 in lib/bandit/http1/socket.ex ignores the caller-supplied :length option when reading HTTP/1 chunked request bodies. Instead of capping the accumulated body at the configured limit (e.g. Plug.Parsers' default 8 MB), do_read_chunked_data!/5 buffers every received chunk into an iolist unconditionally and materializes the entire body as a single binary. The function always returns {:ok, body, ...}, so callers cannot interpose a 413 response. Because Plug.Parsers runs before routing and authentication in the standard Phoenix endpoint, an unauthenticated attacker needs no valid route or credentials. Sending a single Transfer-Encoding: chunked POST request with an arbitrarily large body to any path causes the BEAM process to exhaust available memory and be terminated by the OS OOM killer. The content-length path in the same function correctly enforces the limit and is not affected. This issue affects bandit: from 1.4.0 before 1.11.1.

mtrudel

In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix oneway spam detection The spam detection logic in TreeRange was executed before the current request was inserted into the tree. So the new request was not being factored in the spam calculation. Fix this by moving the logic after the new range has been inserted. Also, the detection logic for ArrayRange was missing altogether which meant large spamming transactions could get away without being detected. Fix this by implementing an equivalent low_oneway_space() in ArrayRange. Note that I looked into centralizing this logic in RangeAllocator but iterating through 'state' and 'size' got a bit too complicated (for me) and I abandoned this effort.

linux

FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.217, the /user-setup/{hash} endpoint accepts a 60-character random invite_hash to set a new user's password. The endpoint performs no expiration check — the hash remains valid indefinitely until consumed. Combined with realistic hash-leakage scenarios (forwarded invite emails, HTTP referrer to external CDNs on the setup page, server-side log exposure, abandoned invite emails in shared inboxes), this enables unauthenticated permanent account takeover months or years after invite issuance. If the leaked invite was sent to an admin, the takeover yields admin access. This issue has been patched in version 1.8.217.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

linux

A vulnerability was determined in AMTT Hotel Broadband Operation System 1.0. Affected is an unknown function of the file /manager/card/cardhand_submit.php. This manipulation of the argument ID causes sql injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Inconsistent Interpretation of HTTP Requests vulnerability in mtrudel bandit allows HTTP request smuggling via duplicate Content-Length headers. 'Elixir.Bandit.Headers':get_content_length/1 in lib/bandit/headers.ex uses List.keyfind/3, which returns only the first matching header. When a request contains two Content-Length headers with different values, Bandit silently accepts it, uses the first value to read the body, and dispatches the remaining bytes as a second pipelined request on the same keep-alive connection. RFC 9112 §6.3 requires recipients to treat this as an unrecoverable framing error. When Bandit sits behind a proxy that picks the last Content-Length value and forwards the request rather than rejecting it, an unauthenticated attacker can smuggle requests past edge WAF rules, path-based ACLs, rate limiting, and audit logging. This issue affects bandit: before 1.11.0.

Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated memory exhaustion via oversized HTTP/2 frames. 'Elixir.Bandit.HTTP2.Frame':deserialize/2 in lib/bandit/http2/frame.ex checks the SETTINGS_MAX_FRAME_SIZE limit only after pattern-matching payload::binary-size(length), which requires the entire frame body to be present in memory before either the accept or reject clause can fire. A peer that announces a frame length up to the 24-bit maximum (~16 MiB) causes the server to buffer that entire body before the size guard is evaluated, regardless of the max_frame_size negotiated during the HTTP/2 handshake (default 16 KiB per RFC 9113). An unauthenticated attacker holding many concurrent connections can force the server to buffer far more memory than the negotiated frame size limit should permit, leading to memory pressure and potential denial of service. This issue affects bandit: from 0.3.6 before 1.11.0.

Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion. The fragment reassembly path in 'Elixir.Bandit.WebSocket.Connection':handle_frame/3 in lib/bandit/websocket/connection.ex appends every incoming Continuation{fin: false} frame's payload to a per-connection iolist with no cumulative size cap. The existing max_frame_size option only bounds individual frames; a peer that streams an unbounded number of continuation frames without ever setting fin=1 grows BEAM heap linearly until the OS or a supervisor kills the process. Because the accumulation happens before WebSock.handle_in/2 is called, the application has no opportunity to interpose a size check. Phoenix Channels and LiveView both run over WebSock on Bandit, so a stock Phoenix application exposes this surface as soon as it accepts socket connections. This issue affects bandit: from 0.5.0 before 1.11.0.

Reliance on Untrusted Inputs in a Security Decision vulnerability in mtrudel bandit allows unauthenticated transport-state spoofing on plaintext HTTP connections. 'Elixir.Bandit.Pipeline':determine_scheme/2 in lib/bandit/pipeline.ex returns the client-supplied URI scheme verbatim, ignoring the transport's secure? flag. HTTP/1.1 absolute-form request targets (e.g. GET https://victim/path HTTP/1.1) and the HTTP/2 :scheme pseudo-header are both attacker-controlled strings that flow through this function. Over a plaintext TCP connection, a client can declare https and Bandit will set conn.scheme = :https even though no TLS was negotiated. Downstream Plug consumers that branch on conn.scheme are silently misled: Plug.SSL's already-secure branch skips its HTTP→HTTPS redirect, cookies emitted with secure: true are sent over plaintext, audit logs record requests as having arrived over HTTPS, and CSRF/SameSite gating may make incorrect decisions. This issue affects bandit: from 1.0.0 before 1.11.0.

Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion when WebSocket permessage-deflate compression is enabled. 'Elixir.Bandit.WebSocket.PerMessageDeflate':inflate/2 in lib/bandit/websocket/permessage_deflate.ex calls :zlib.inflate/2 with no output-size cap, then materializes the entire decompressed payload as a single binary via IO.iodata_to_binary/1. The websocket_options.max_frame_size option only bounds the on-the-wire (compressed) frame size, not the decompressed output. A high-ratio compressed frame (e.g. uniform data at ~1024:1 ratio) can stay well under any wire-size limit while forcing GiB-scale heap allocations in the connection process before any application code runs. An unauthenticated attacker who can open a WebSocket connection can send a single such frame to exhaust the BEAM node's memory and trigger an OOM kill. This vulnerability requires both Bandit's server-level websocket_options.compress and the per-upgrade compress: true option passed to WebSockAdapter.upgrade/4 to be enabled. Stock Phoenix and LiveView applications are not affected as they default to compress: false. This issue affects bandit: from 0.5.9 before 1.11.0.

TOTOLINK N200RE V5 was discovered to contain a command injection vulnerability via the macstr and bandstr parameters in the formMapDelDevice function.

Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy.   Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration.                                                                                                                                                                         Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue.

apache

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require 3 sub-authorities before reading sub_auth[2] parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares only min(num_subauth, 2) sub-authorities so a client SID with num_subauth = 2 and sub_auth = {88, 3} will match. If num_subauth = 2 and the ACE is placed at the very end of the security descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The out-of-band bytes will then be masked to the low 9 bits and applied as the file's POSIX mode, probably not something that is good to have happen. Fix this up by forcing the SID to actually carry a third sub-authority before reading it at all.

linux