In the Linux kernel, the following vulnerability has been resolved: mfd: cros_ec: Delay dev_set_drvdata() until probe success If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0

In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event().

The web management interface in  Tycon Systems TPDIN-Monitor-WEB2 stores and displays system credentials in cleartext on a certain configuration page accessible to authenticated users. Any party with access to the administrative dashboard can immediately read these credentials, which may be used to compromise other systems on the local network.

The SureDash – Community, Courses & Member Dashboard plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Shortcode Attributes in all versions up to, and including, 1.10.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Fathom Lite through 1.3.1 contains a stored cross-site scripting vulnerability in the analytics collection endpoint that allows unauthenticated attackers to inject a javascript: URI into the Top Pages dashboard by supplying a crafted hostname and pathname to the unauthenticated /collect endpoint. The parseHostname and parsePathname functions perform no URI scheme validation, allowing a javascript: hostname combined with a newline-prefixed pathname to be stored and later rendered as an anchor href in the authenticated dashboard without sanitization, enabling session hijacking and full account takeover when an operator clicks the poisoned entry.

Joomla Extension - regularlabs.com - XSS vector in Keyboard Shortcuts extension - Shortcut configuration accepted arbitrary inline JavaScript.

Vulnerability in the Oracle Partner Management product of Oracle E-Business Suite (component: Partner Dashboard). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle Partner Management. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Partner Management accessible data as well as unauthorized read access to a subset of Oracle Partner Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Partner Management. CVSS 3.1 Base Score 6.3 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L).

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: OpenSearch Dashboards). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N).

oracle

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: disable BH around forwarded sk_receive_skb() The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard.

In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time.

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, when response caching is enabled, the cache-key derivation in api/src/utils/get-cache-key.ts includes version, path, query, and accountability.user but omits authorization context such as share, role, roles, admin, app, and policies. Directus share tokens and anonymous requests can both reduce to user null, so different shares or anonymous clients requesting the same URL and query can receive a permission-filtered cached response without permission re-evaluation. This issue is fixed in version 12.0.0.

monospace

Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, the SSRF protection on Directus's file-import-from-URL feature can be bypassed using the address 0.0.0.0 because api/src/request/is-denied-ip.ts treats 0.0.0.0 as a keyword for local interfaces but never blocks the literal address itself. On Linux and macOS, connecting to 0.0.0.0 reaches localhost, so an authenticated user with file-upload rights can make the server fetch internal services through the /files/import endpoint and retrieve the response as a downloadable file. This issue is fixed in version 12.0.0.

monospace

In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] ....

linux

In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop.

linux

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture.

linux

This issue was addressed through improved state management. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. A malicious website may be able to silently hijack clipboard data.

apple

We have released version 5.24.0 of the Grafana Operator. This patch includes a CRITICAL severity security fix for a path traversal/privilege escalation vulnerability in the Grafana Operator. ### Summary The Grafana Operator supports loading dashboards & library panels using the jsonnet data templating language. The jsonnet expression is evaluated in the context of the operator manager pod. ### Impact It is possible for a malicious user who can create Dashboard or LibraryPanel resources for a Grafana instance to obtain the Kubernetes service account token of the Grafana Operator manager. ### Affected versions All Grafana Operator versions <= 5.23 ### Solutions and mitigations All installations should be upgraded as soon as possible. As a workaround, the following ValidatingAdmissionPolicy prevent the creation or modification of jsonnet based resources: apiVersion: admissionregistration.k8s.io/v1 kind: ValidatingAdmissionPolicy metadata: name: "prevent-jsonnet-dashboards" spec: failurePolicy: Fail matchConstraints: resourceRules: - apiGroups: ["grafana.integreatly.org"] apiVersions: ["v1beta1"] operations: ["CREATE", "UPDATE"] resources: ["grafanadashboards", "grafanalibrarypanels"] validations: - expression: "!has(object.spec.jsonnetLib)" --- apiVersion: admissionregistration.k8s.io/v1 kind: ValidatingAdmissionPolicyBinding metadata: name: "prevent-jsonnet-dashboards-clusterwide" spec: policyName: "prevent-jsonnet-dashboards" validationActions: [Deny] ### Acknowledgement We would like to thank Artem Cherezov for responsibly disclosing the vulnerability.

Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.0.0 to before version 2.2.0, the Nezha dashboard exposes two endpoints that create long-lived WebSocket streams to monitored agents: POST /api/v1/terminal → createTerminal() (terminal.go:27-67) and POST /api/v1/file → createFM() (fm.go:28-67). Both call rpc.NezhaHandlerSingleton.CreateStream(streamId, ...) which inserts a new ioStreamContext into an unbounded map[string]*ioStreamContext (s.ioStreams in io_stream.go:59-67). There is no per-user rate limit, no global semaphore, and no per-server connection cap. This issue has been patched in version 2.2.0.

Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 2.0.14 to before version 2.1.0, authenticated users can claim the dashboard Host through NAT and preempt all dashboard routing. This issue has been patched in version 2.1.0.

Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. Prior to version 2.0.13, fallbackToFrontend in the dashboard's NoRoute handler treats any URL whose raw string starts with /dashboard as an admin-frontend asset request. The check uses strings.HasPrefix, not a path-segment match, so the input /dashboard../data/config.yaml is accepted; strings.TrimPrefix leaves ../data/config.yaml; and path.Join("admin-dist", "../data/config.yaml") normalizes to data/config.yaml — which os.Stat finds and http.ServeFile returns. No authentication required. This issue has been patched in version 2.0.13.