In the Linux kernel, the following vulnerability has been resolved: accel/qaic: tighten bounds checking in decode_message() Copy the bounds checking from encode_message() to decode_message(). This patch addresses the following concerns. Ensure that there is enough space for at least one header so that we don't have a negative size later. if (msg_hdr_len < sizeof(*trans_hdr)) Ensure that we have enough space to read the next header from the msg->data. if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) return -EINVAL; Check that the trans_hdr->len is not below the minimum size: if (hdr_len < sizeof(*trans_hdr)) This minimum check ensures that we don't corrupt memory in decode_passthrough() when we do. memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr)); And finally, use size_add() to prevent an integer overflow: if (size_add(msg_len, hdr_len) > msg_hdr_len)

linux

In the Linux kernel, the following vulnerability has been resolved: io_uring/memmap: cast nr_pages to size_t before shifting If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue.

linux

FOG is a free open-source cloning/imaging/rescue suite/inventory management system. Versions 1.5.10.1673 and below contain an authentication bypass vulnerability. It is possible for an attacker to perform an unauthenticated DB dump where they could pull a full SQL DB without credentials. A fix is expected to be released 9/15/2025. To address this vulnerability immediately, upgrade to the latest version of either the dev-branch or working-1.6 branch. This will patch the issue for users concerned about immediate exposure. See the FOG Project documentation for step-by-step upgrade instructions: https://docs.fogproject.org/en/latest/install-fog-server#choosing-a-fog-version.

fogproject

A vulnerability has been found in Dahua products. Attackers could exploit a buffer overflow vulnerability by sending specially crafted malicious packets, potentially causing service disruption (e.g., crashes) or remote code execution (RCE). Some devices may have deployed protection mechanisms such as Address Space Layout Randomization (ASLR), which reduces the likelihood of successful RCE exploitation. However, denial-of-service (DoS) attacks remain a concern.

A vulnerability has been found in Dahua products. Attackers could exploit a buffer overflow vulnerability by sending specially crafted malicious packets, potentially causing service disruption (e.g., crashes) or remote code execution (RCE). Some devices may have deployed protection mechanisms such as Address Space Layout Randomization (ASLR), which reduces the likelihood of successful RCE exploitation. However, denial-of-service (DoS) attacks remain a concern.

Meshtastic is an open source mesh networking solution. Prior to 2.5.1, traceroute responses from the remote node are not rate limited. Given that there are SNR measurements attributed to each received transmission, this is a guaranteed way to get a remote station to reliably and continuously respond. You could easily get 100 samples in a short amount of time (estimated 2 minutes), whereas passively doing the same could take hours or days. There are secondary effects that non-ratelimited traceroute does also allow a 2:1 reflected DoS of the network as well, but these concerns are less than the problem with positional confidentiality (other DoS routes exist). This vulnerability is fixed in 2.5.1.

meshtastic

XWiki is a generic wiki platform. In versions before 15.10.16, 16.0.0-rc-1 through 16.4.6, and 16.5.0-rc-1 through 16.10.1, when an attacker without script or programming right creates an XClass definition in XWiki (requires edit right), and that same document is later edited by a user with script, admin, or programming right, malicious code could be executed with the rights of the editing user without prior warning. In particular, this concerns custom display code, the script of computed properties and queries in database list properties. Note that warnings before editing documents with dangerous properties have only been introduced in XWiki 15.9, before that version, this was a known issue and the advice was simply to be careful. This has been patched in XWiki 16.10.2, 16.4.7 and 15.10.16 by adding an analysis for the respective XClass properties.

xwiki

The Open edX Platform is a learning management platform. Prior to commit 6740e75c0fdc7ba095baf88e9f5e4f3e15cfd8ba, edxapp has no built-in protection against downloading the python_lib.zip asset from courses, which is a concern since it often contains custom grading code or answers to course problems. This potentially affects any course using custom Python-graded problem blocks. The openedx/configuration repo has had a patch since 2016 in the form of an nginx rule, but this was only intended as a temporary mitigation. As the configuration repo has been deprecated and we have not been able to locate any similar protection in Tutor, it is likely that most deployments have no protection against python_lib.zip being downloaded. The recommended mitigation, implemented in commit 6740e75c0fdc7ba095baf88e9f5e4f3e15cfd8ba, restricts python_lib.zip downloads to just the course team and site staff/superusers.

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Eliminate window where TLB flushes may be inadvertently skipped tl;dr: There is a window in the mm switching code where the new CR3 is set and the CPU should be getting TLB flushes for the new mm. But should_flush_tlb() has a bug and suppresses the flush. Fix it by widening the window where should_flush_tlb() sends an IPI. Long Version: === History === There were a few things leading up to this. First, updating mm_cpumask() was observed to be too expensive, so it was made lazier. But being lazy caused too many unnecessary IPIs to CPUs due to the now-lazy mm_cpumask(). So code was added to cull mm_cpumask() periodically[2]. But that culling was a bit too aggressive and skipped sending TLB flushes to CPUs that need them. So here we are again. === Problem === The too-aggressive code in should_flush_tlb() strikes in this window: // Turn on IPIs for this CPU/mm combination, but only // if should_flush_tlb() agrees: cpumask_set_cpu(cpu, mm_cpumask(next)); next_tlb_gen = atomic64_read(&next->context.tlb_gen); choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); load_new_mm_cr3(need_flush); // ^ After 'need_flush' is set to false, IPIs *MUST* // be sent to this CPU and not be ignored. this_cpu_write(cpu_tlbstate.loaded_mm, next); // ^ Not until this point does should_flush_tlb() // become true! should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3() and writing to 'loaded_mm', which is a window where they should not be suppressed. Whoops. === Solution === Thankfully, the fuzzy "just about to write CR3" window is already marked with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in should_flush_tlb() is sufficient to ensure that the CPU is targeted with an IPI. This will cause more TLB flush IPIs. But the window is relatively small and I do not expect this to cause any kind of measurable performance impact. Update the comment where LOADED_MM_SWITCHING is written since it grew yet another user. Peter Z also raised a concern that should_flush_tlb() might not observe 'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off() writes them. Add a barrier to ensure that they are observed in the order they are written.

linux · debian

Spotipy is a Python library for the Spotify Web API. As of commit 4f5759dbfb4506c7b6280572a4db1aabc1ac778d, using `pull_request_target` on `.github/workflows/integration_tests.yml` followed by the checking out the head.sha of a forked PR can be exploited by attackers, since untrusted code can be executed having full access to secrets (from the base repo). By exploiting the vulnerability is possible to exfiltrate `GITHUB_TOKEN` and secrets `SPOTIPY_CLIENT_ID`, `SPOTIPY_CLIENT_SECRET`. In particular `GITHUB_TOKEN` which can be used to completely overtake the repo since the token has content write privileges. The `pull_request_target` in GitHub Actions is a major security concern—especially in public repositories—because it executes untrusted code from a PR, but with the context of the base repository, including access to its secrets. Commit 9dfb7177b8d7bb98a5a6014f8e6436812a47576f reverted the change that caused the issue.

A flaw was found in systems utilizing LUKS-encrypted disks with GRUB configured for TPM-based auto-decryption. When GRUB is set to automatically decrypt disks using keys stored in the TPM, it reads the decryption key into system memory. If an attacker with physical access can corrupt the underlying filesystem superblock, GRUB will fail to locate a valid filesystem and enter rescue mode. At this point, the disk is already decrypted, and the decryption key remains loaded in system memory. This scenario may allow an attacker with physical access to access the unencrypted data without any further authentication, thereby compromising data confidentiality. Furthermore, the ability to force this state through filesystem corruption also presents a data integrity concern.

Initialization vector (IV) reuse in the web management portal of the Tenda RX2 Pro 16.03.30.14 may allow an attacker to discern information about or more easily decrypt encrypted messages between client and server.

tenda

It technically possible for a user to upload a file to a conversation despite the file upload functionality being disabled. The file upload functionality can be enabled or disabled for specific use cases through configuration. In case the functionality is disabled for at least one use case, the system nevertheless allows files to be uploaded through direct API requests. During the upload file, interception and allowed file type rules are still applied correctly. If file sharing is generally enabled, this issue is not of concern.

unblu

XWiki Platform is a generic wiki platform. Prior to 15.10.14, 16.4.6, and 16.10.0-rc-1, it's possible for an user to get access to private information through the REST API - but could also be through another API - when a sub wiki is using "Prevent unregistered users to view pages". The vulnerability only affects subwikis, and it only concerns specific right options such as "Prevent unregistered users to view pages". or "Prevent unregistered users to edit pages". It's possible to detect the vulnerability by enabling "Prevent unregistered users to view pages" and then trying to access a page through the REST API without using any credentials. The vulnerability has been patched in XWiki 15.10.14, 16.4.6 and 16.10.0RC1.

xwiki

In the Linux kernel, the following vulnerability has been resolved: mm: fix unexpected zeroed page mapping with zram swap Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly.

linux

A vulnerability classified as problematic has been found in GNU Binutils 2.43. Affected is the function xstrdup of the file xstrdup.c of the component ld. The manipulation leads to memory leak. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."

gnu

A vulnerability was found in GNU Binutils 2.43. It has been rated as problematic. This issue affects the function xmemdup of the file xmemdup.c of the component ld. The manipulation leads to memory leak. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."

gnu

A vulnerability was found in GNU Binutils 2.43. It has been declared as problematic. This vulnerability affects the function bfd_malloc of the file libbfd.c of the component ld. The manipulation leads to memory leak. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."

gnu

A vulnerability was found in GNU Binutils 2.43. It has been classified as problematic. This affects the function xstrdup of the file libiberty/xmalloc.c of the component ld. The manipulation leads to memory leak. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."

gnu

A vulnerability was found in GNU Binutils 2.43 and classified as problematic. Affected by this issue is the function link_order_scan of the file ld/ldelfgen.c of the component ld. The manipulation leads to memory leak. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."

gnu

ps_contactinfo, a PrestaShop module for displaying store contact information, has a cross-site scripting (XSS) vulnerability in versions up to and including 3.3.2. This can not be exploited in a fresh install of PrestaShop, only shops made vulnerable by third party modules are concerned. For example, if the shop has a third party module vulnerable to SQL injections, then ps_contactinfo might execute a stored cross-site scripting in formatting objects. Commit d60f9a5634b4fc2d3a8831fb08fe2e1f23cbfa39 keeps formatted addresses from displaying a XSS stored in the database, and the fix is expected to be available in version 3.3.3. No workarounds are available aside from applying the fix and keeping all modules maintained and update.

The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. However, this could be a breaking change for existing CDK applications and we should fix this with a feature flag. Note that this is marked as low severity Security advisory because the issuer url is provided by CDK users who define the CDK application. If they insist on connecting to a unauthorized OIDC provider, CDK should not disallow this. Additionally, the code block is run in a Lambda environment which mitigate the MITM attack. The patch is in progress. To mitigate, upgrade to CDK v2.177.0 (Expected release date 2025-02-22). Once upgraded, users should make sure the feature flag '@aws-cdk/aws-iam:oidcRejectUnauthorizedConnections' is set to true in `cdk.context.json` or `cdk.json`. There are no known workarounds for this vulnerability.

amazon

The W3 Total Cache plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 2.8.1 through the publicly exposed debug log file. This makes it possible for unauthenticated attackers to view potentially sensitive information in the exposed log file. For example, the log file may contain nonce values that can be used in further CSRF attacks. Note: the debug feature must be enabled for this to be a concern, and it is disabled by default.

boldgrid