oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers.

Astro is a web framework for content-driven websites. In versions 5.2.0 through 5.12.7, there is an Open Redirect vulnerability in the trailing slash redirection logic when handling paths with double slashes. This allows an attacker to redirect users to arbitrary external domains by crafting URLs such as https://mydomain.com//malicious-site.com/. This increases the risk of phishing and other social engineering attacks. This affects sites that use on-demand rendering (SSR) with the Node or Cloudflare adapters. It does not affect static sites, or sites deployed to Netlify or Vercel. This issue is fixed in version 5.12.8. To work around this issue at the network level, block outgoing redirect responses with a Location header value that starts with `//`.

astro

Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames. QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers. An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5.

cloudflare

In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated---

linux

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames covering a large range of packet numbers (including packet numbers that had never been sent); see RFC 9000 Section 19.3. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. In extreme cases, the window might grow beyond the limit of the internal variable's type, leading to an overflow panic. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

cloudflare

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames exercising an opportunistic ACK attack; see RFC 9000 Section 21.4. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

cloudflare

A Server-Side Request Forgery (SSRF) vulnerability was identified in the @opennextjs/cloudflare package. The vulnerability stems from an unimplemented feature in the Cloudflare adapter for Open Next, which allowed unauthenticated users to proxy arbitrary remote content via the /_next/image endpoint. This issue allowed attackers to load remote resources from arbitrary hosts under the victim site’s domain for any site deployed using the Cloudflare adapter for Open Next.  For example: https://victim-site.com/_next/image?url=https://attacker.com In this example, attacker-controlled content from attacker.com is served through the victim site’s domain (victim-site.com), violating the same-origin policy and potentially misleading users or other services. Impact: * SSRF via unrestricted remote URL loading * Arbitrary remote content loading * Potential internal service exposure or phishing risks through domain abuse Mitigation: The following mitigations have been put in place: * Server side updates to Cloudflare’s platform to restrict the content loaded via the /_next/image endpoint to images. The update automatically mitigates the issue for all existing and any future sites deployed to Cloudflare using the affected version of the Cloudflare adapter for Open Next * Root cause fix https://github.com/opennextjs/opennextjs-cloudflare/pull/727  to the Cloudflare adapter for Open Next. The patched version of the adapter is found here  @opennextjs/cloudflare@1.3.0 https://www.npmjs.com/package/@opennextjs/cloudflare/v/1.3.0 * Package dependency update https://github.com/cloudflare/workers-sdk/pull/9608  to create-cloudflare (c3) to use the fixed version of the Cloudflare adapter for Open Next. The patched version of create-cloudflare is found here:  create-cloudflare@2.49.3 https://www.npmjs.com/package/create-cloudflare/v/2.49.3 In addition to the automatic mitigation deployed on Cloudflare’s platform, we encourage affected users to upgrade to @opennext/cloudflare v1.3.0 and use the remotePatterns https://nextjs.org/docs/pages/api-reference/components/image#remotepatterns filter in Next config https://nextjs.org/docs/pages/api-reference/components/image#remotepatterns if they need to allow-list external urls with images assets.

cloudflare · opennextjs

A request smuggling vulnerability identified within Pingora’s proxying framework, pingora-proxy, allows malicious HTTP requests to be injected via manipulated request bodies on cache HITs, leading to unauthorized request execution and potential cache poisoning. Fixed in:  https://github.com/cloudflare/pingora/commit/fda3317ec822678564d641e7cf1c9b77ee3759ff https://github.com/cloudflare/pingora/commit/fda3317ec822678564d641e7cf1c9b77ee3759ff Impact: The issue could lead to request smuggling in cases where Pingora’s proxying framework, pingora-proxy, is used for caching allowing an attacker to manipulate headers and URLs in subsequent requests made on the same HTTP/1.1 connection.

cloudflare

In the Linux kernel, the following vulnerability has been resolved: veth: Fix use after free in XDP_REDIRECT Commit 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") introduced a bug where it tried to use pskb_expand_head() if the headroom was less than XDP_PACKET_HEADROOM. This however uses kmalloc to expand the head, which will later allow consume_skb() to free the skb while is it still in use by AF_XDP. Previously if the headroom was less than XDP_PACKET_HEADROOM we continued on to allocate a new skb from pages so this restores that behavior. BUG: KASAN: use-after-free in __xsk_rcv+0x18d/0x2c0 Read of size 78 at addr ffff888976250154 by task napi/iconduit-g/148640 CPU: 5 PID: 148640 Comm: napi/iconduit-g Kdump: loaded Tainted: G O 6.1.4-cloudflare-kasan-2023.1.2 #1 Hardware name: Quanta Computer Inc. QuantaPlex T41S-2U/S2S-MB, BIOS S2S_3B10.03 06/21/2018 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? __xsk_rcv+0x18d/0x2c0 kasan_report+0xad/0x130 ? __xsk_rcv+0x18d/0x2c0 kasan_check_range+0x149/0x1a0 memcpy+0x20/0x60 __xsk_rcv+0x18d/0x2c0 __xsk_map_redirect+0x1f3/0x490 ? veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] xdp_do_redirect+0x5ca/0xd60 veth_xdp_rcv_skb+0x935/0x1ba0 [veth] ? __netif_receive_skb_list_core+0x671/0x920 ? veth_xdp+0x670/0x670 [veth] veth_xdp_rcv+0x304/0xa20 [veth] ? do_xdp_generic+0x150/0x150 ? veth_xdp_rcv_one+0xde0/0xde0 [veth] ? _raw_spin_lock_bh+0xe0/0xe0 ? newidle_balance+0x887/0xe30 ? __perf_event_task_sched_in+0xdb/0x800 veth_poll+0x139/0x571 [veth] ? veth_xdp_rcv+0xa20/0xa20 [veth] ? _raw_spin_unlock+0x39/0x70 ? finish_task_switch.isra.0+0x17e/0x7d0 ? __switch_to+0x5cf/0x1070 ? __schedule+0x95b/0x2640 ? io_schedule_timeout+0x160/0x160 __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 ? __napi_poll+0x440/0x440 ? __kthread_parkme+0xc6/0x1f0 ? __napi_poll+0x440/0x440 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 148640: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 skb_release_data+0x449/0x600 consume_skb+0x9f/0x1c0 veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] veth_xdp_rcv+0x304/0xa20 [veth] veth_poll+0x139/0x571 [veth] __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 kthread+0x2a2/0x340 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888976250000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 340 bytes inside of 2048-byte region [ffff888976250000, ffff888976250800) The buggy address belongs to the physical page: page:00000000ae18262a refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x976250 head:00000000ae18262a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004cf00 raw: 0000000000000000 0000000080080008 00000002ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888976250000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888976250100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888976250180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

linux

PKCE was implemented in the OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp . However, it was found that an attacker could cause the check to be skipped. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/27 https://github.com/cloudflare/workers-oauth-provider/pull/27 Impact: PKCE is a defense-in-depth mechanism against certain kinds of attacks and was an optional extension in OAuth 2.0 which became required in the OAuth 2.1 draft. (Note that the MCP specification requires OAuth 2.1.). This bug completely bypasses PKCE protection.

cloudflare

The OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp , did not correctly validate that redirect_uri was on the allowed list of redirect URIs for the given client registration. Fixed in:  https://github.com/cloudflare/workers-oauth-provider/pull/26 https://github.com/cloudflare/workers-oauth-provider/pull/26 Impact: Under certain circumstances (see below), if a victim had previously authorized with a server built on workers-oath-provider, and an attacker could later trick the victim into visiting a malicious web site, then attacker could potentially steal the victim's credentials to the same OAuth server and subsequently impersonate them. In order for the attack to be possible, the OAuth server's authorized callback must be designed to auto-approve authorizations that appear to come from an OAuth client that the victim has authorized previously. The authorization flow is not implemented by workers-oauth-provider; it is up to the application built on top to decide whether to implement such automatic re-authorization. However, many applications do implement such logic. Note: It is a basic, well-known requirement that OAuth servers should verify that the redirect URI is among the allowed list for the client, both during the authorization flow and subsequently when exchanging the authorization code for an access token. workers-oauth-provider implemented only the latter check, not the former. Unfortunately, the former is the much more important check. Readers who are familiar with OAuth may recognize that failing to check redirect URIs against the allowed list is a well-known, basic mistake, covered extensively in the RFC and elsewhere. The author of this library would like everyone to know that he was, in fact, well-aware of this requirement, thought about it a lot while designing the library, and then, somehow, forgot to actually make sure the check was in the code. That is, it's not that he didn't know what he was doing, it's that he knew what he was doing but flubbed it.

cloudflare

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in shanaver CloudFlare(R) Cache Purge cloudflare-cache-purge allows Reflected XSS.This issue affects CloudFlare(R) Cache Purge: from n/a through <= 1.2.

When copying files with rsync, octorpki uses the "-a" flag 0, which forces rsync to copy binaries with the suid bit set as root. Since the provided service definition defaults to root ( https://github.com/cloudflare/cfrpki/blob/master/package/octorpki.service ) this could allow for a vector, when combined with another vulnerability that causes octorpki to process a malicious TAL file, for a local privilege escalation.

cloudflare

Improper Privilege Management vulnerability in Cloudflare WARP on Windows allows File Manipulation. User with a low system privileges  can create a set of symlinks inside the C:\ProgramData\Cloudflare\warp-diag-partials folder. After triggering the 'Reset all settings" option the WARP service will delete the files that the symlink was pointing to. Given the WARP service operates with System privileges this might lead to deleting files owned by the System user. This issue affects WARP: before 2024.12.492.0.

cloudflare

`oak` is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. By default `oak` does not allow transferring of hidden files with `Context.send` API. However, prior to version 17.1.3, this can be bypassed by encoding `/` as its URL encoded form `%2F`. For an attacker this has potential to read sensitive user data or to gain access to server secrets. Version 17.1.3 fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock") switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe version. That was OK, because idev->lock was held for these codepaths. In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were removed, so we probably need to restore the original rcu-safe call. Otherwise, we occasionally get a machine crashed/stalled with the following in dmesg: [ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI [ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1 [ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV [ 3406.009552][T230589] Workqueue: mld mld_ifc_work [ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60 [ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b [ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202 [ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040 [ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008 [ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000 [ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100 [ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000 [ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000 [ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0 [ 3406.162421][T230589] Call Trace: [ 3406.170235][T230589] <TASK> [ 3406.177736][T230589] mld_newpack+0xfe/0x1a0 [ 3406.186686][T230589] add_grhead+0x87/0xa0 [ 3406.195498][T230589] add_grec+0x485/0x4e0 [ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0 [ 3406.214024][T230589] mld_ifc_work+0x15d/0x450 [ 3406.223279][T230589] process_one_work+0x1e6/0x380 [ 3406.232982][T230589] worker_thread+0x50/0x3a0 [ 3406.242371][T230589] ? rescuer_thread+0x360/0x360 [ 3406.252175][T230589] kthread+0x127/0x150 [ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40 [ 3406.271287][T230589] ret_from_fork+0x22/0x30 [ 3406.280812][T230589] </TASK> [ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders] [ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]---

linux

Fides is an open-source privacy engineering platform. `fides.js`, a client-side script used to interact with the consent management features of Fides, used the `polyfill.io` domain in a very limited edge case, when it detected a legacy browser such as IE11 that did not support the fetch standard. Therefore it was possible for users of legacy, pre-2017 browsers who navigate to a page serving `fides.js` to download and execute malicious scripts from the `polyfill.io` domain when the domain was compromised and serving malware. No exploitation of `fides.js` via `polyfill.io` has been identified as of time of publication. The vulnerability has been patched in Fides version `2.39.1`. Users are advised to upgrade to this version or later to secure their systems against this threat. On Thursday, June 27, 2024, Cloudflare and Namecheap intervened at a domain level to ensure `polyfill.io` and its subdomains could not resolve to the compromised service, rendering this vulnerability unexploitable. Prior to the domain level intervention, there were no server-side workarounds and the confidentiality, integrity, and availability impacts of this vulnerability were high. Clients could ensure they were not affected by using a modern browser that supported the fetch standard.

ethyca

Cross-Site Request Forgery (CSRF) vulnerability in Optimole Super Page Cache for Cloudflare allows Stored XSS.This issue affects Super Page Cache for Cloudflare: from n/a through 4.7.5.

optimole

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

cloudflare

Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.

cloudflare

In the Linux kernel, the following vulnerability has been resolved: sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues.

linux

Crafatar serves Minecraft avatars based on the skin for use in external applications. Files outside of the `lib/public/` directory can be requested from the server. Instances running behind Cloudflare (including crafatar.com) are not affected. Instances using the Docker container as shown in the README are affected, but only files within the container can be read. By default, all of the files within the container can also be found in this repository and are not confidential. This vulnerability is patched in 2.1.5.

crafatar