In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent ubuf size overflow The ubuf size calculation may overflow, resulting in an undersized allocation and possible memory corruption. Use check_add_overflow() helpers to validate the size calculation before allocation.

linux

A stored cross-site scripting (XSS) vulnerability in the component /admin/add-brand.php of Phpgurukul Vehicle Record Management System v1.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the brandname parameter.

phpgurukul

SAMtools is a program for reading, manipulating and writing bioinformatics file formats. The `mpileup` command outputs DNA sequences that have been aligned against a known reference. On each output line it writes the reference position, optionally the reference DNA base at that position (obtained from a separate file) and all of the DNA bases that aligned to that position. As the output is ordered by position, reference data that is no longer needed is discarded once it has been printed out. Under certain conditions the data could be discarded too early, leading to an attempt to read from a pointer to freed memory. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. This bug is fixed in versions 1.21.1 and 1.22. There is no workaround for this issue.

samtools

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_LEN` method, the `cram_byte_array_len_decode()` failed to validate that the amount of data being unpacked matched the size of the output buffer where it was to be stored. Depending on the data series being read, this could result either in a heap or a stack overflow with attacker-controlled bytes. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_STOP` method, an out-by-one error in the `cram_byte_array_stop_decode_char()` function check for a full output buffer could result in a single attacker-controlled byte being written beyond the end of a heap allocation. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, the value of the mate reference id field was not validated. Later use of this value, for example when converting the data to SAM format, could result in the out of bounds array reads when looking up the corresponding reference name. If the array value obtained also happened to be a valid pointer, it would be interpreted as a string and an attempt would be made to write the data as part of the SAM record. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding CRAM records, the reference data is stored in a char array, and parts matching the alignment record sequence are copied over as necessary. Due to insufficient validation of the feature data series, it was possible to make the `cram_decode_seq()` function copy data from either before the start, or after the end of the stored reference either into the buffer used to store the output sequence for the cram record, or into the buffer used to build the SAM `MD` tag. This allowed arbitrary data to be leaked to the calling function. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, validation of the reference id field occurred too late, allowing two out of bounds reads to occur before the invalid data was detected. The bug does allow two values to be leaked to the caller, however as the function reports an error it may be difficult to exploit them. It is also possible that the program will crash due to trying to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `CONST`, `XPACK` and `XRLE` encodings did not properly implement the interface needed to do this. Trying to decode records with omitted sequence or quality data using these encodings would result in an attempt to write to a NULL pointer. Exploiting this bug causes a NULL pointer dereference. Typically this will cause the program to crash. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding these features, an out-by-one error in a test for CRAM features that appear beyond the extent of the CRAM record sequence could result in an invalid write of one attacker-controlled byte beyond the end of a heap buffer. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.

htslib

kaniko is a tool to build container images from a Dockerfile, inside a container or Kubernetes cluster. Starting in version 1.25.4 and prior to version 1.25.10, kaniko unpacks build context archives using `filepath.Join(dest, cleanedName)` without enforcing that the final path stays within `dest`. A tar entry like `../outside.txt` escapes the extraction root and writes files outside the destination directory. In environments with registry authentication, this can be chained with docker credential helpers to achieve code execution within the executor process. Version 1.25.10 uses securejoin for path resolution in tar extraction.

chainguard

IPFire 2.21 Core Update 127 contains multiple cross-site scripting vulnerabilities in the ovpnmain.cgi script that allow attackers to inject malicious scripts through VPN configuration parameters. Attackers can submit POST requests with script payloads in parameters like VPN_IP, DMTU, ccdname, ccdsubnet, DOVPN_SUBNET, DHCP_DOMAIN, DHCP_DNS, DHCP_WINS, ROUTES_PUSH, FRAGMENT, KEEPALIVE_1, and KEEPALIVE_2 to execute arbitrary JavaScript in administrator browsers.

ipfire

The Smart Forms plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'rednao_smart_forms_get_campaigns' AJAX action in all versions up to, and including, 2.6.99. This makes it possible for authenticated attackers, with Subscriber-level access and above, to retrieve donation campaign data including campaign IDs and names.

An unauthenticated attacker can exploit this vulnerability by manipulating URL to achieve arbitrary file read access.This issue affects Valmet DNA Web Tools: C2022 and older.

valmet

Infinera DNA is vulnerable to a time-based SQL injection vulnerability due to insufficient input validation, which may result in leaking of sensitive information.

nokia

A security flaw has been discovered in Tenda M3 1.0.0.13(4903). This issue affects the function formSetAdInfoDetails of the file /goform/setAdInfoDetail. The manipulation of the argument adName/smsPassword/smsAccount/weixinAccount/weixinName/smsSignature/adRedirectUrl/adCopyRight/smsContent/adItemUID results in heap-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

tenda

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix an integer overflow in aie2_query_ctx_status_array() The unpublished smatch static checker reported a warning. drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array() warn: potential user controlled sizeof overflow 'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)' Even this will not cause a real issue, it is better to put a reasonable limitation for element_size and num_element. Add condition to make sure the input element_size <= 4K and num_element <= 1K.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding.

The Wpik WordPress Basic Ajax Form plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'dname' parameter in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Stored cross-site scripting vulnerability in bridgetech VBC Server & Element Manager, firmware versions 6.5.0-9 thru 6.5.0-10, allows attackers to execute arbitrary code via the addName parameter to the /vbc/core/userSetupDoc/userSetupDoc endpoint.

bridgetech