The LINUXTCP port of FreeModbus contains an off-by-one bounds check in xMBPortTCPPool() (demo/LINUXTCP/port/porttcp.c). The check `if (usTCPFrameBytesLeft > MB_TCP_BUF_SIZE)` uses a strict greater-than comparison instead of greater-than-or-equal against the 263-byte MB_TCP_BUF_SIZE limit. An MBAP frame with a Length field of 264 makes usTCPFrameBytesLeft equal to 263, which passes the flawed check, and the subsequent recv() call writes up to 263 bytes starting at buffer offset 7 into the 263-byte static buffer aucTCPBuf, overflowing it by 7 bytes into the adjacent static variable usTCPBufPos. A single crafted, unauthenticated Modbus TCP packet triggers the overflow, since Modbus has no built-in authentication.

nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus client-side recv_read_device_identification_res() function (FC 0x2B/MEI 0x0E, Read Device Identification) in nanomodbus.c. The server-supplied object_length field (0-246) is validated only against the remaining PDU size (res_size_left) and is never validated against the caller-supplied buffers_length parameter. After copying data with strncpy(buffers_out[buf_index], str, buffers_length), the code unconditionally writes a NUL terminator at buffers_out[buf_index][object_length]. When a malicious or compromised Modbus server sends a response with object_length greater than or equal to the client's buffers_length, this NUL write lands past the end of the caller-provided buffer, corrupting adjacent stack or heap memory on the client.

nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus server-side handle_read_file_record() function (FC 0x14, Read File Record) in nanomodbus.c. The function validates that the total request size does not exceed 245 bytes and that each sub-request's record_length is at most 124, but it never validates the CUMULATIVE response size across all sub-requests before processing them. The accumulator response_data_size is declared as uint8_t and is incremented by 2 + record_length*2 for each of up to 35 sub-requests; with 35 sub-requests of record_length=124, the cumulative demand is 8750 bytes, which overflows the uint8_t accumulator. A subsequent loop then calls get_n(), an internal function with no bounds checking, once per sub-request to obtain a pointer into the 260-byte msg.buf receive buffer and advances the internal buf_idx by up to 248 bytes per call; swap_regs() then writes to that pointer unconditionally. A single crafted FC 0x14 request from an unauthenticated network client can cause up to ~8490 bytes to be written out of bounds past the 260-byte buffer, corrupting adjacent memory in the server process and leading to denial of service or potential remote code execution, particularly on embedded/bare-metal targets without memory protection.

299Ko's public contact form (plugin/contact/controllers/ContactController.php, home()) sets raw POST field values (name, firstname, email, message) into the page template with no sanitization. The template engine's variable output function (common/Template.php, _show_var()) echoes values with no htmlspecialchars() call, and the sink template (contact.tpl) outputs these values unescaped into an HTML attribute and a textarea. An unauthenticated attacker can submit a payload such as name="><script>alert(document.domain)</script> to achieve reflected XSS against any visitor who submits or is tricked into auto-submitting the form, including a targeted administrator, enabling session token theft.

Magistrala's Rules Engine allows authenticated users to create rules with embedded Go or Lua scripts executed server-side when IoT messages arrive. The Go script engine (re/golang.go) runs scripts through the Yaegi interpreter with stdlib.Symbols, exposing the full Go standard library (including os and net/http) with validation limited to a regex blocking goroutines and panic() calls; dangerous functions such as os.ReadFile, os.WriteFile, os.Remove, and os.Environ remain fully accessible. The Lua script engine (re/lua.go) performs no input validation at all and preloads dangerous libraries: db (arbitrary database access), ioutil (file I/O), an HTTP client (SSRF), and filepath (traversal). An authenticated low-privileged user can achieve arbitrary file read/write, environment variable leakage, database access, and SSRF against internal microservices.

A flaw was found in the Multicluster Engine for Kubernetes ClusterCurator controller. A tenant administrator with namespace-scoped privileges can exploit this vulnerability by creating a namespaced ClusterCurator. This action inadvertently grants the tenant administrator the ability to mint a token for a ServiceAccount with cluster-wide administrative authority. This leads to a privilege escalation, allowing the tenant administrator to gain full control over the cluster.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NVM tag length underflow in TLV parser In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is "while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a size_t (12), so "length" is converted to size_t and any firmware-supplied "length" < 12 makes the subtraction wrap to a huge value. The loop body then reads a 12-byte struct tlv_type_nvm past the end of the short vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it). Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both operands are non-negative, so it no longer underflows and a "length" too small for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245)

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying.

The miniOrange 2FA WordPress plugin before 6.2.7 does not bind the second factor being configured during the pre-login two-factor challenge to the target account's existing factor, allowing an attacker who knows a user's password to rebind that user's second factor to an attacker-controlled destination, complete the challenge, and take over the account, including administrator accounts.

A vulnerability has been found in epsilla-cloud vectordb up to 0.3.18/df5a5f5afb85a2376a0f2f316c79dea9b2c6ac7a. This impacts the function SplitTokens/ShuntingYard of the file engine/query/expr/expr.cpp of the component Filter Parser. Such manipulation leads to improper check for unusual conditions. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the construct_uri() function concatenates multiple URI components (protocol, username, domain, port, params) into a fixed 1024-byte global BSS buffer without any bounds checking. When a routing script calls construct_uri() with an attacker-controlled username, a combined component length exceeding 1024 bytes overflows the buffer, corrupting adjacent global data with attacker-controlled content. The overflow reaches disable_503_translation, a global flag controlling SIP 503 response handling, allowing an attacker to deterministically set the flag via the URI username and alter the server's routing behavior for subsequent messages. Because the same buffer is shared with contact_builder(), the overflow also corrupts that function's data, and without a memory sanitizer the adjacent globals are silently overwritten on every request containing a long username. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the TCP message framing layer parses the Content-Length header using unsigned int arithmetic with no overflow check. When an attacker sends a Content-Length value that overflows unsigned int (e.g., 4294967296), the framing layer computes a wrapped-around value (e.g., 0) and splits the TCP stream at the wrong boundary, causing the body of the first SIP message to be processed as a separate message and enabling SIP message smuggling. Because Content-Length is parsed in the transport layer before authentication, an unauthenticated, network-based attacker can smuggle arbitrary SIP messages over any TCP-based transport (proto_tcp, proto_tls, proto_ws, proto_wss) on any instance with TCP enabled, with no routing-script preconditions. This allows smuggled messages to bypass front-end SBC/proxy security policies, inherit the connection's authentication context, and evade rate limiting. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.

Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.6 until 0.11.0, the built-in knowledge search path in backend/open_webui/tools/knowledge_fs.py and backend/open_webui/tools/builtin.py let a chat participant choose a pattern used to grep knowledge files. Patterns containing regex metacharacters were compiled with Python's backtracking re engine and run against every line of every reachable file with no time limit, so a crafted pattern such as (x|x)*y and one matching uploaded file line can pin one CPU core and block the event loop. This causes availability impact for every other user of the affected worker. This issue is fixed in 0.11.0.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions 4.0.0 and prior, processing a SIP message with a header name longer than 255 bytes causes a stack buffer overflow when sip_to_json() is called in the routing script. Function sip_to_json() (modules/sipmsgops/sipmsgops.c) copies SIP header names into a fixed 255-byte stack buffer without bounds checking, performing a memcpy of the full header-name length even though the SIP parser imposes no such limit (a header name can be roughly 65000 bytes). As a result, when a routing script calls sip_to_json(), a SIP message with a header name longer than 255 bytes triggers a stack buffer overflow in which both the length and content of the overwrite are attacker-controlled, corrupting the saved frame pointer and return address. A single unauthenticated UDP packet to the SIP port (5060) can crash the process or, on builds without stack protections, hijack the return address to achieve remote code execution. This affects deployments whose routing script invokes sip_to_json(). This issue was not fixed at the time of publication.

Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.6 until 0.11.0, with WEB_LOADER_ENGINE=playwright, the Playwright web loader validates only the top-level page request and lets sub-resource requests pass unvalidated. A page supplied by an authenticated user can use JavaScript to reach blocked internal addresses, and returned DOM can include data read from those addresses in web-search or RAG output. This issue is fixed in 0.11.0.

A flaw was found in SSSD. The extract_authtok_v1() function in the PAM responder does not validate the auth_token_length field against the remaining buffer size before processing. A local attacker can exploit this via a crafted protocol v1 request to the PAM responder socket, causing an out-of-bounds read and process crash, resulting in a denial of service.

Memory Corruption when processing Device Capability Extended attributes in certain NAN Service Discovery Frames with invalid length values.

Information Disclosure when processing wireless network channel switch information with improperly formatted length fields.

The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass. The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a '.' or 'e'/'E' is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller. As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes. The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase. Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected. Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, and from 2.19.0 through 2.21.3, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. The 2.22.x and 3.2.x release lines are not affected: those branches were created after the fix commit landed on 2026-05-21 and therefore contain it from their initial releases (2.22.0, tagged 2026-06-03, and 3.2.0, tagged 2026-06-08).

The non-blocking (asynchronous) JSON parser in jackson-core does not enforce the maxNumberLength constraint defined in StreamReadConstraints (default: 1000 characters). An attacker able to submit JSON to an application that uses the async parser API can supply a number token of arbitrary length, leading to excessive memory allocation and potential CPU exhaustion, resulting in a denial of service. The synchronous parser enforces this limit correctly, so the constraint is applied inconsistently depending on which parsing API the application uses. Root cause: the async parsing path in NonBlockingUtf8JsonParserBase and related classes never invokes the number length validation methods. Number parsing methods such as _finishNumberIntegralPart() accumulate digits into the TextBuffer without any length check, then call _valueComplete() to finalize the token. _valueComplete() does not call resetInt() or resetFloat(), which are the methods in ParserBase where validateIntegerLength() and validateFPLength() are performed. Because that validation step is skipped, maxNumberLength is never enforced on the async code path. Impact: an attacker sending a JSON document containing an arbitrarily long number to an application using the async parser (for example a Spring WebFlux or other reactive application) can cause unbounded allocation in the TextBuffer and an OutOfMemoryError. If the application subsequently calls getBigIntegerValue() or getDecimalValue(), the JVM may additionally be tied up in O(n^2) BigInteger parsing, causing CPU-based denial of service. No privileges or user interaction beyond the ability to submit data for parsing are required. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.5 and from 2.19.0 through 2.21.0, and tools.jackson.core:jackson-core from 3.0.0 through 3.0.x. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-72hv-8253-57qq records the lower bound of the affected 2.x range as 2.0.0.

In Eclipse Jetty, the Digest authentication server-side component uses ISO-8859-1 to encode the password as bytes. This was done because the initial specification for HTTP did not specify explicitly a charset, and it was assumed to be ISO-8859-1 for historical reasons. If the password contains characters that cannot be represented in ISO-8859-1, they are silently replaced by `?`. This happens with passwords that contain Chinese, Cyrillic or Greek characters, for example: `αβ123` converts to `??123`. An attacker can send a request with a digest `Authorization` header crafted with a password made of only `?` characters; the server would match any password of the same length that contains non-ISO-8859-1 characters. Recent HTTP Digest [RFC-7616](https://datatracker.ietf.org/doc/html/rfc7616) supports a `charset` parameters that defaults to UTF-8 that allows for correct encoding/decoding of passwords.

A flaw in Node.js allows a spoofed `TypedArray` `byteLength` to trigger a reachable assertion in the synchronous `node:zlib` APIs, causing the entire process to crash. All 11 synchronous zlib functions are affected. Repeated exploitation of this condition can result in a denial of service. This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**.