In the Linux kernel, the following vulnerability has been resolved: f2fs: fix missing read bio submission on large folio error f2fs_read_data_large_folio() can keep a read bio across multiple readahead folios. If a later folio hits an error before any of its blocks are added to the bio, folio_in_bio is false and the current error path returns immediately after ending that folio. This can leave the bio accumulated for earlier folios unsubmitted. Those folios then never receive read completion, and readers can wait indefinitely on the locked folios. Route errors through the common out path so any pending bio is submitted before returning. Stop consuming more readahead folios once an error is seen, and only wait on and clear the current folio when it was actually added to the bio.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on f2fs_get_node_folio_ra() kernel BUG at fs/f2fs/file.c:845! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845 Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90 RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283 RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000 RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504 RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002 R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0 Call Trace: <TASK> f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0); The fuzz test will trigger above bug_on in f2fs. The root cause should be: in the corrupted inode, there is a direct node which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(), after f2fs_get_dnode_of_data() finds such dnode: 1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923 2) once dn.ofs_in_node points to addr[923, 1017] Then it will trigger the system panic. Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should not be an inode or xattr node, and then use it in below path to detect inconsistent node chain in inode mapping table: - f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode

In the Linux kernel, the following vulnerability has been resolved: f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode - ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink - f2fs_gc - gc_data_segment - ra_data_block(cow_inode) - mapping = F2FS_I(inode)->atomic_inode->i_mapping : f2fs_is_cow_file(cow_inode) is true - f2fs_evict_inode(atomic_inode) - clear_inode_flag(fi->cow_inode, FI_COW_FILE) - F2FS_I(fi->cow_inode)->atomic_inode = NULL ... - truncate_inode_pages_final(atomic_inode) - f2fs_grab_cache_folio(mapping) : create folio in atomic_inode->mapping - clear_inode(atomic_inode) - BUG_ON(atomic_inode->i_data.nrpages) We need to add a reference on fi->atomic_inode before using its mapping field during garbage collection, otherwise, it will cause UAF issue.

In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block" This reverts commit 9609dd704725a40cd63d915f2ab6c44248a44598. The kernel panics are keeping to be reported especially when the f2fs partition get almost full. By investigation, we find that the reason is one f2fs page got freed to buddy without being deleted from LRU and the root cause is the race happened in [2] which is enrolled by this commit. There are 3 race processes in this scenario, please find below for their main activities. The changed code in move_data_block() lets the GC path evict the tail-end folio from the page cache through folio_end_dropbehind(). Once folio_unmap_invalidate() removes the folio from mapping->i_pages, the page-cache references for all pages in the folio are dropped. The folio is then kept alive only by temporary external references, which allows a later split to operate on a folio whose subpages are no longer protected by page-cache references. After the page-cache references are gone, split_folio_to_order() can split the big folio into individual pages and put the resulting subpages back on the LRU. For tail pages beyond EOF, split removes them from the page cache and drops their page-cache references. A tail page can then remain on the LRU with PG_lru set while holding only the split caller's temporary reference. When free_folio_and_swap_cache() drops that final reference, the page enters the final folio_put() release path. In parallel, folio_isolate_lru() can observe the same tail page with a non-zero refcount and PG_lru set. It clears PG_lru before taking its own reference. If this races with the final folio_put() from the split path, __folio_put() sees PG_lru already cleared and skips lruvec_del_folio(). The page is then freed back to the allocator while its lru links are still present in the LRU list. A later LRU operation on a neighboring page detects the stale link and reports list corruption. [1] [ 22.486082] list_del corruption. next->prev should be fffffffec10e0ac8, but was dead000000000122. (next=fffffffec10e0a88) [ 22.486130] ------------[ cut here ]------------ [ 22.486134] kernel BUG at lib/list_debug.c:67! [ 22.486141] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 22.488502] Tainted: [W]=WARN, [O]=OOT_MODULE [ 22.488506] Hardware name: Spreadtrum UMS9230 1H10 SoC (DT) [ 22.488511] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 22.488517] pc : __list_del_entry_valid_or_report+0x14c/0x154 [ 22.488531] lr : __list_del_entry_valid_or_report+0x14c/0x154 [ 22.488539] sp : ffffffc08006b830 [ 22.488542] x29: ffffffc08006b868 x28: 0000000000003020 x27: 0000000000000000 [ 22.488553] x26: 0000000000000000 x25: 0000000000000004 x24: fffffffec10e0ac0 [ 22.488564] x23: 00000000000000e8 x22: 0000000000000024 x21: dead000000000122 [ 22.488574] x20: fffffffec10e0a88 x19: fffffffec10e0ac8 x18: ffffffc080061060 [ 22.488585] x17: 20747562202c3863 x16: 6130653031636566 x15: 0000000000000058 [ 22.488595] x14: 0000000000000004 x13: ffffff80f91e0000 x12: 0000000000000003 [ 22.488605] x11: 0000000000000003 x10: 0000000000000001 x9 : ffe85721f0e25f00 [ 22.488615] x8 : ffe85721f0e25f00 x7 : 0000000000000000 x6 : 6c65645f7473696c [ 22.488625] x5 : ffffffed39b23026 x4 : 0000000000000000 x3 : 0000000000000010 [ 22.488636] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000006d [ 22.488647] Call trace: [ 22.488651] __list_del_entry_valid_or_report+0x14c/0x154 (P) [ 22.488661] __folio_put+0x2bc/0x434 [ 22.488670] folio_put+0x28/0x58 [ 22.488678] do_garbage_collect+0x1a34/0x2584 [ 22.488689] f2fs_gc+0x230/0x9b4 [ 22.488697] f2fs_fallocate+0xb90/0xdf4 [ 22.488706] vfs_fallocate+0x1b4/0x2bc [ 22.488716] __arm64_sys_fallocate+0x44/0x78 [ 22.488725] invoke_syscall+0x58/0xe4 [ 22.488732] do_el0_svc+0x48/0xdc [ 22.488739] el0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node() When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does not reset the length of the largest extent to 0 and update the inode folio. Since modifications to the extent tree are disallowed afterward, the cached largest extent may become stale. This can trigger the following error in xfstests generic/388: F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix In the f2fs_drop_inode path, __destroy_extent_node() does not need to guarantee that et->node_cnt is 0, because concurrency with writeback is expected in this path, and writeback may update the extent cache. This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between extent node destroy and writeback"), and remove the unnecessary zero check of et->node_cnt.

In the Linux kernel, the following vulnerability has been resolved: f2fs: read COW data with the original inode during atomic write When updating an atomic-write file, f2fs_write_begin() may read the previously written data back from the COW inode: prepare_atomic_write_begin() locates the block in the COW inode and sets use_cow, and the read bio is then built with the COW inode: f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode, ...); and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption (STEP_DECRYPT) for the bio based on that inode via fscrypt_inode_uses_fs_layer_crypto(). However, the folio being filled belongs to the original inode (folio->mapping->host == inode), and the data stored in the COW block was encrypted (or left as plaintext) using the original inode's context, not the COW inode's -- see f2fs_encrypt_one_page(), which keys off fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise operates on folio->mapping->host. The COW inode is created as a tmpfile in the parent directory and inherits its encryption policy from there. With test_dummy_encryption the newly created COW inode gets the dummy policy and becomes encrypted, while a pre-existing regular file -- created before the policy applied, e.g. already present in the on-disk image -- stays unencrypted. The read path then sets STEP_DECRYPT based on the encrypted COW inode and calls fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted original inode) has a NULL ->i_crypt_info, dereferencing it: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310 Workqueue: f2fs_post_read_wq f2fs_post_read_work Call Trace: fscrypt_decrypt_bio+0x1eb/0x340 f2fs_post_read_work+0xba/0x140 process_one_work+0x91c/0x1a40 worker_thread+0x677/0xe90 kthread+0x2bc/0x3a0 The COW inode is only needed to locate the on-disk block, and that block address is already resolved into @blkaddr by prepare_atomic_write_begin() via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads from that physical @blkaddr directly, so the inode argument only selects the post-read crypto context, not which block is fetched. Reading with @inode therefore returns the same (latest, not-yet-committed) COW data, while making both the fs-layer decryption decision and the inline crypto path use the correct (original inode's) key. With the COW inode no longer used at the read site, the use_cow flag has no remaining consumer; drop it from f2fs_write_begin() and prepare_atomic_write_begin().

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject oversized group bitmap descriptors ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?)

linux

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before replacing page cache folio fuse_try_move_folio() unlocks the request on entry but does not re-lock it on the success path. This means fuse_chan_abort() can end the request and free the fuse_io_args (eg fuse_readpages_end()) while the subsequent copy chain logic after fuse_try_move_folio() accesses the fuse_io_args, leading to use-after-free issues. Fix this by calling lock_request() before replace_page_cache_folio(). This ensures the request is locked on the success path which will prevent the fuse_io_args from being freed while the later copying logic runs, and also ensures that the ap->folios[i]->mapping is never null since ap->folios[i] will always point to the newfolio after replace_page_cache_folio().

linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion with the checkpoint path, which can result in an incorrect inode block marking state. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return true - f2fs_fsync_node_pages // inode dirtied - f2fs_need_dentry_mark //return true - f2fs_flush_nat_entries - f2fs_write_checkpoint end - __write_node_folio // inode with DENT_BIT_SHIFT set SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The state observed by f2fs_need_dentry_mark() can differ from the state observed in __write_node_folio() after acquiring sbi->node_write. The root cause is that the semantics of IS_CHECKPOINTED and HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has fully completed. This patch moves set_dentry_mark() into __write_node_folio() and protects it with the sbi->node_write lock.

linux

In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.

linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero); 4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A. Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: <TASK> context_switch kernel/sched/core.c:5298 [inline] __schedule+0x1553/0x5240 kernel/sched/core.c:6911 __schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid: ---truncated---

linux

In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free().

linux

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unmap race with PMD migration entries The following race is possible with migration swap entries or device-private THP entries. e.g. when move_pages is called on a PMD THP page, then there maybe an intermediate state, where PMD entry acts as a migration swap entry (pmd_present() is true). Then if an munmap happens at the same time, then this VM_BUG_ON() can happen in pmdp_huge_get_and_clear_full(). This patch fixes that. Thread A: move_pages() syscall add_folio_for_migration() mmap_read_lock(mm) folio_isolate_lru(folio) mmap_read_unlock(mm) do_move_pages_to_node() migrate_pages() try_to_migrate_one() spin_lock(ptl) set_pmd_migration_entry() pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn set_pmd_at() # PMD: migration swap entry (pmd_present=0) spin_unlock(ptl) [page copy phase] # <--- RACE WINDOW --> Thread B: munmap() mmap_write_downgrade(mm) unmap_vmas() -> zap_pmd_range() zap_huge_pmd() __pmd_trans_huge_lock() pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry) pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl pmdp_huge_get_and_clear_full() VM_BUG_ON(!pmd_present(*pmdp)) # HITS! [ 287.738700][ T1867] ------------[ cut here ]------------ [ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187! cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0] pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c lr: c000000000645dec: zap_huge_pmd+0xb0/0x868 sp: c00000044037f790 msr: 800000000282b033 current = 0xc0000004032c1a00 paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09 pid = 1867, comm = a.out kernel BUG at :187! Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026 enter ? for help [link register ] c000000000645dec zap_huge_pmd+0xb0/0x868 [c00000044037f790] c00000044037f7d0 (unreliable) [c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868 [c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40 [c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8 [c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128 [c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310 [c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238 [c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8 [c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40 [c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350 [c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec ---- Exception: 3000 (System Call Vectored) at 0000000010064a2c SP (7fff9b1ee9c0) is in userspace 0:mon> zh commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"), enabled migration for device-private PMD entries. Hence this is one other path where this warning could get trigger from. ------------[ cut here ]------------ WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905 Modules linked in: test_hmm CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284 LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4 Call Trace: [c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable) [c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498 [c000000604707760] [c00000000063e5a4] migrate_vma_col ---truncated---

linux

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPZOOM Portfolio allows Reflected XSS. This issue affects WPZOOM Portfolio: from n/a through 1.4.21.

In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many().

The Automotive Car Dealership Business WordPress Theme for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Project Details' custom field in Portfolio Items in all versions up to, and including, 13.4.1. This is due to insufficient input sanitization and output escaping on user-supplied attributes in the 'project_details' custom field. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC.

linux

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.

linux

In the Linux kernel, the following vulnerability has been resolved: ceph: fix num_ops off-by-one when crypto allocation fails move_dirty_folio_in_page_array() may fail if the file is encrypted, the dirty folio is not the first in the batch, and it fails to allocate a bounce buffer to hold the ciphertext. When that happens, ceph_process_folio_batch() simply redirties the folio and flushes the current batch -- it can retry that folio in a future batch. However, if this failed folio is not contiguous with the last folio that did make it into the batch, then ceph_process_folio_batch() has already incremented `ceph_wbc->num_ops`; because it doesn't follow through and add the discontiguous folio to the array, ceph_submit_write() -- which expects that `ceph_wbc->num_ops` accurately reflects the number of contiguous ranges (and therefore the required number of "write extent" ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops); This issue can be reproduced on affected kernels by writing to fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat pattern (total filesize should not matter) and gradually increasing the system's memory pressure until a bounce buffer allocation fails. Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct value when move_dirty_folio_in_page_array() fails, but the folio already started counting a new (i.e. still-empty) extent. The defect corrected by this patch has existed since 2022 (see first `Fixes:`), but another bug blocked multi-folio encrypted writeback until recently (see second `Fixes:`). The second commit made it into 6.18.16, 6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch therefore fixes a regression (panic) introduced by cac190c7674f.

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in.

In the Linux kernel, the following vulnerability has been resolved: mm: fix deferred split queue races during migration migrate_folio_move() records the deferred split queue state from src and replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0) makes dst visible before it is requeued, so a concurrent rmap-removal path can mark dst partially mapped and trip the WARN in deferred_split_folio(). Move the requeue before remove_migration_ptes() so dst is back on the deferred split queue before it becomes visible again. Because migration still holds dst locked at that point, teach deferred_split_scan() to requeue a folio when folio_trylock() fails. Otherwise a fully mapped underused folio can be dequeued by the shrinker and silently lost from split_queue. [ziy@nvidia.com: move the comment]

In the Linux kernel, the following vulnerability has been resolved: mm/memfd_luo: fix physical address conversion in put_folios cleanup In memfd_luo_retrieve_folios()'s put_folios cleanup path: 1. kho_restore_folio() expects a phys_addr_t (physical address) but receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to check the wrong physical address (pfn << PAGE_SHIFT instead of the actual physical address). 2. This loop lacks the !pfolio->pfn check that exists in the main retrieval loop and memfd_luo_discard_folios(), which could incorrectly process sparse file holes where pfn=0. Fix by converting PFN to physical address with PFN_PHYS() and adding the !pfolio->pfn check, matching the pattern used elsewhere in this file. This issue was identified by the AI review. https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn

In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.