HackerOne community member Patrick Lang (7yr) has reported a reflected XSS vulnerability in the banner-acl.php script of Revive Adserver. An attacker can craft a specific URL that includes an HTML payload in a parameter. If a logged in administrator visits the URL, the HTML is sent to the browser and malicious scripts would be executed.

aquaplatform

HackerOne community member Patrick Lang (7yr) has reported a reflected XSS vulnerability in the `banner-acl.php` and `channel-acl.php` scripts of Revive Adserver. An attacker can craft a specific URL that includes an HTML payload in a parameter. If a logged in administrator visits the URL, the HTML is sent to the browser and malicious scripts would be executed.

aquaplatform

HackerOne community member Jad Ghamloush (0xjad) has reported an authorization bypass vulnerability in the `tracker-delete.php` script of Revive Adserver. Users with permissions to delete trackers are mistakenly allowed to delete trackers owned by other accounts.

aquaplatform

HackerOne community member Faraz Ahmed (PakCyberbot) has reported a format string injection in the Revive Adserver settings. When specific character combinations are used in a setting, the admin user console could be disabled due to a fatal PHP error.

aquaplatform

In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs with ConfigVersion 9.3 or later support IBT in the guest. However, current versions of Hyper-V have a bug in that there's not an ENDBR64 instruction at the beginning of the hypercall page. Since hypercalls are made with an indirect call to the hypercall page, all hypercall attempts fail with an exception and Linux panics. A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start with ENDBR. The VM will boot and run without IBT. If future Linux 32-bit kernels were to support IBT, additional hypercall page hackery would be needed to make IBT work for such kernels in a Hyper-V VM.

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ...

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn instruction, discard the exception and retry the instruction if the code stream is changed (e.g. by a different vCPU) between when the CPU executes the instruction and when KVM decodes the instruction to get the next RIP. As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction"), failure to verify that the correct INTn instruction was decoded can effectively clobber guest state due to decoding the wrong instruction and thus specifying the wrong next RIP. The bug most often manifests as "Oops: int3" panics on static branch checks in Linux guests. Enabling or disabling a static branch in Linux uses the kernel's "text poke" code patching mechanism. To modify code while other CPUs may be executing that code, Linux (temporarily) replaces the first byte of the original instruction with an int3 (opcode 0xcc), then patches in the new code stream except for the first byte, and finally replaces the int3 with the first byte of the new code stream. If a CPU hits the int3, i.e. executes the code while it's being modified, then the guest kernel must look up the RIP to determine how to handle the #BP, e.g. by emulating the new instruction. If the RIP is incorrect, then this lookup fails and the guest kernel panics. The bug reproduces almost instantly by hacking the guest kernel to repeatedly check a static branch[1] while running a drgn script[2] on the host to constantly swap out the memory containing the guest's TSS. [1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a [2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b

In gokey versions <0.2.0, a flaw in the seed decryption logic resulted in passwords incorrectly being derived solely from the initial vector and the AES-GCM authentication tag of the key seed. This issue has been fixed in gokey version 0.2.0. This is a breaking change. The fix has invalidated any passwords/secrets that were derived from the seed file (using the -s option). Even if the input seed file stays the same, version 0.2.0 gokey will generate different secrets. Impact This vulnerability impacts generated keys/secrets using a seed file as an entropy input (using the -s option). Keys/secrets generated just from the master password (without the -s option) are not impacted. The confidentiality of the seed itself is also not impacted (it is not required to regenerate the seed itself). Specific impact includes: * keys/secrets generated from a seed file may have lower entropy: it was expected that the whole seed would be used to generate keys (240 bytes of entropy input), where in vulnerable versions only 28 bytes was used * a malicious entity could have recovered all passwords, generated from a particular seed, having only the seed file in possession without the knowledge of the seed master password Patches The code logic bug has been fixed in gokey version 0.2.0 and above. Due to the deterministic nature of gokey, fixed versions will produce different passwords/secrets using seed files, as all seed entropy will be used now. System secret rotation guidance It is advised for users to regenerate passwords/secrets using the patched version of gokey (0.2.0 and above), and provision/rotate these secrets into respective systems in place of the old secret. A specific rotation procedure is system-dependent, but most common patterns are described below. Systems that do not require the old password/secret for rotation Such systems usually have a "Forgot password" facility or a similar facility allowing users to rotate their password/secrets by sending a unique "magic" link to the user's email or phone. In such cases users are advised to use this facility and input the newly generated password secret, when prompted by the system. Systems that require the old password/secret for rotation Such systems usually have a modal password rotation window usually in the user settings section requiring the user to input the old and the new password sometimes with a confirmation. To generate/recover the old password in such cases users are advised to: * temporarily download gokey version 0.1.3 https://github.com/cloudflare/gokey/releases/tag/v0.1.3 for their respective operating system to recover the old password * use gokey version 0.2.0 or above to generate the new password * populate the system provided password rotation form Systems that allow multiple credentials for the same account to be provisioned Such systems usually require a secret or a cryptographic key as a credential for access, but allow several credentials at the same time. One example is SSH: a particular user may have several authorized public keys configured on the SSH server for access. For such systems users are advised to: * generate a new secret/key/credential using gokey version 0.2.0 or above * provision the new secret/key/credential in addition to the existing credential on the system * verify that the access or required system operation is still possible with the new secret/key/credential * revoke authorization for the existing/old credential from the system Credit This vulnerability was found by Théo Cusnir ( @mister_mime https://hackerone.com/mister_mime ) and responsibly disclosed through Cloudflare's bug bounty program.

cloudflare

HackerOne community member Kassem S.(kassem_s94) has reported that username handling in Revive Adserver was still vulnerable to impersonation attacks after the fix for CVE-2025-52672, via several alternate techniques. Homoglyphs based impersonation has been independently reported by other HackerOne users, such as itz_hari_ and khoof.

aquaplatform

HackerOne community member Dang Hung Vi (vidang04) has reported an uncontrolled resource consumption vulnerability in the “userlog-index.php”. An attacker with access to the admin interface could request an arbitrarily large number of items per page, potentially leading to a denial of service.

aquaplatform

HackerOne community member Dao Hoang Anh (yoyomiski) has reported an improper neutralization of whitespace in the username when adding new users. A username with leading or trailing whitespace could be virtually indistinguishable from its legitimate counterpart when the username is displayed in the UI, potentially leading to confusion.

aquaplatform

HackerOne community member Dang Hung Vi (vidang04) has reported a stored XSS vulnerability involving the navigation box at the top of advertiser-related pages, with campaign names being the vector for the stored XSS

aquaplatform

A logic error exists in the Falcon sensor for Windows that could allow an attacker, with the prior ability to execute code on a host, to delete arbitrary files. CrowdStrike released a security fix for this issue in Falcon sensor for Windows versions 7.24 and above and all Long Term Visibility (LTV) sensors. There is no indication of exploitation of these issues in the wild. Our threat hunting and intelligence teams are actively monitoring for exploitation and we maintain visibility into any such attempts. The Falcon sensor for Mac, the Falcon sensor for Linux and the Falcon sensor for Legacy Systems are not impacted by this. CrowdStrike was made aware of this issue through our HackerOne bug bounty program. It was discovered by Cong Cheng and responsibly disclosed.

A race condition exists in the Falcon sensor for Windows that could allow an attacker, with the prior ability to execute code on a host, to delete arbitrary files. CrowdStrike released a security fix for this issue in Falcon sensor for Windows versions 7.24 and above and all Long Term Visibility (LTV) sensors. There is no indication of exploitation of these issues in the wild. Our threat hunting and intelligence team are actively monitoring for exploitation and we maintain visibility into any such attempts. The Falcon sensor for Mac, the Falcon sensor for Linux and the Falcon sensor for Legacy Systems are not impacted by this. CrowdStrike was made aware of this issue through our HackerOne bug bounty program. It was discovered by Cong Cheng and responsibly disclosed.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Check instead of asserting on nested TSC scaling support Check for nested TSC scaling support on nested SVM VMRUN instead of asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO has diverged from KVM's default. Userspace can trigger the WARN at will by writing the MSR and then updating guest CPUID to hide the feature (modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking KVM's state_test selftest to do vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0); vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR); after restoring state in a new VM+vCPU yields an endless supply of: ------------[ cut here ]------------ WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699 nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd] Call Trace: <TASK> enter_svm_guest_mode+0x114/0x560 [kvm_amd] nested_svm_vmrun+0x260/0x330 [kvm_amd] vmrun_interception+0x29/0x30 [kvm_amd] svm_invoke_exit_handler+0x35/0x100 [kvm_amd] svm_handle_exit+0xe7/0x180 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm] kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm] __se_sys_ioctl+0x7a/0xc0 __x64_sys_ioctl+0x21/0x30 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x45ca1b Note, the nested #VMEXIT path has the same flaw, but needs a different fix and will be handled separately.

linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/

linux

The The Hack Repair Guy's Plugin Archiver plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.0.4. This is due to missing or incorrect nonce validation on the bulk_remove() function. This makes it possible for unauthenticated attackers to arbitrary directory deletion in /wp-content via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

hackmd-mcp is a Model Context Protocol server for integrating HackMD's note-taking platform with AI assistants. From 1.4.0 to before 1.5.0, hackmd-mcp contains a server-side request forgery (SSRF) vulnerability when the server is run in HTTP transport mode. Arbitrary hackmdApiUrl values supplied via the Hackmd-Api-Url HTTP header or a base64-encoded JSON query parameter are accepted without validation, allowing attackers to redirect outbound API requests to internal network services, access internal endpoints, perform network reconnaissance, and bypass network access controls. The stdio transport mode is not affected because it only accepts stdio requests. The issue is fixed in version 1.5.0, which enforces allowed endpoints and supports the ALLOWED_HACKMD_API_URLS environment variable. Users should update to 1.5.0 or later or apply documented mitigations such as switching to stdio mode, restricting outbound network access, or filtering the Hackmd-Api-Url header and related query parameter via a reverse proxy.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 state When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired ratio doesn't match the current ratio, not if the ratio L1 is using for L2 diverges from the default. Functionally, the end result is the same as KVM will run L2 with L1's multiplier if L2's multiplier is the default, i.e. checking that L1's multiplier is loaded is equivalent to checking if L2 has a non-default multiplier. However, the assertion that TSC scaling is exposed to L1 is flawed, as userspace can trigger the WARN at will by writing the MSR and then updating guest CPUID to hide the feature (modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking KVM's state_test selftest to do vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0); vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR); after restoring state in a new VM+vCPU yields an endless supply of: ------------[ cut here ]------------ WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105 nested_svm_vmexit+0x6af/0x720 [kvm_amd] Call Trace: nested_svm_exit_handled+0x102/0x1f0 [kvm_amd] svm_handle_exit+0xb9/0x180 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm] kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm] ? trace_hardirqs_off+0x4d/0xa0 __se_sys_ioctl+0x7a/0xc0 __x64_sys_ioctl+0x21/0x30 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check into the if-statement is wrong as KVM needs to ensure L1's multiplier is loaded in the above scenario. Alternatively, the WARN_ON() could simply be deleted, but that would make KVM's behavior even more subtle, e.g. it's not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when checking only tsc_ratio_msr.

linux

The The Hack Repair Guy's Plugin Archiver plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the prepare_items function in all versions up to, and including, 2.0.4. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).

Concrete CMS versions 9 through 9.4.2 are vulnerable to Stored XSS from Home Folder on Members Dashboard page.  Version 8 was not affected. A rogue admin could set up a malicious folder containing XSS to which users could be directed upon login. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 2.0 with vector CVSS:4.0/AV:N/AC:H/AT:N/PR:H/UI:P/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N. Thanks sealldev  (Noah Cooper) for reporting via HackerOne.

concretecms

In the Linux kernel, the following vulnerability has been resolved: smc: Fix various oops due to inet_sock type confusion. syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435efcbf3 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [ ---truncated---

linux

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events and this triggers the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780 Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50 RSP: 0018:ffff888121787dc0 EFLAGS: 00010002 RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49 RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982 R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00 R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008 FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ring_buffer_map_get_reader+0x10/0x10 tracing_buffers_ioctl+0x283/0x370 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f95c8de48db Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006 RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90 </TASK> irq event stamp: 5080 hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70 hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70 softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710 softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210 ---[ end trace 0000000000000000 ]--- The above was triggered by running on a kernel with both lockdep and KASAN as well as kmemleak enabled and executing the following command: # perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50 With perf interjecting a lot of interrupts and trace-cmd enabling all events as well as function tracing, with lockdep, KASAN and kmemleak enabled, it could cause an interrupt preempting an event being written to add enough event ---truncated---

linux