Improper input validation of printing files in Monoprice Select Mini V2 V37.115.32 allows attackers to instruct the device's movable parts to destinations that exceed the devices' maximum coordinates via the printing of a malicious .gcode file.

monoprice

Incomplete fix for CVE-2024-1929 The problem with CVE-2024-1929 was that the dnf5 D-Bus daemon accepted arbitrary configuration parameters from unprivileged users, which allowed a local root exploit by tricking the daemon into loading a user controlled "plugin". All of this happened before Polkit authentication was even started. The dnf5 library code does not check whether non-root users control the directory in question.  On one hand, this poses a Denial-of-Service attack vector by making the daemonoperate on a blocking file (e.g. named FIFO special file) or a very large file that causes an out-of-memory situation (e.g. /dev/zero). On the other hand, this can be used to let the daemon process privileged files like /etc/shadow. The file in question is parsed as an INI file. Error diagnostics resulting from parsing privileged files could cause information leaks, if these diagnostics are accessible to unprivileged users. In the case of libdnf5, no such user accessible diagnostics should exist, though. Also, a local attacker can place a valid repository configuration file in this directory. This configuration file allows to specify a plethora of additional configuration options. This makes various additional code paths in libdnf5 accessible to the attacker.

In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section The .compat section is a dummy PE section that contains the address of the 32-bit entrypoint of the 64-bit kernel image if it is bootable from 32-bit firmware (i.e., CONFIG_EFI_MIXED=y) This section is only 8 bytes in size and is only referenced from the loader, and so it is placed at the end of the memory view of the image, to avoid the need for padding it to 4k, which is required for sections appearing in the middle of the image. Unfortunately, this violates the PE/COFF spec, and even if most EFI loaders will work correctly (including the Tianocore reference implementation), PE loaders do exist that reject such images, on the basis that both the file and memory views of the file contents should be described by the section headers in a monotonically increasing manner without leaving any gaps. So reorganize the sections to avoid this issue. This results in a slight padding overhead (< 4k) which can be avoided if desired by disabling CONFIG_EFI_MIXED (which is only needed in rare cases these days)

linux

An issue in kimono-oldnew mini-app on Line v13.6.1 allows attackers to send crafted malicious notifications via leakage of the channel access token.

linecorp

Heap out-of-bounds write vulnerability in dec_mono_audb of libsavsac.so prior to SMR Dec-2023 Release 1 allows an attacker to execute arbitrary code.

samsung

Mono Authenticode Validation Spoofing Vulnerability

microsoft

@aedart/support is the support package for Ion, a monorepo for JavaScript/TypeScript packages. Prior to version `0.6.1`, there is a possible prototype pollution issue for the `MetadataRecord`, when merged with a base class' metadata object, in `meta` decorator from the `@aedart/support` package. The likelihood of exploitation is questionable, given that a class's metadata can only be set or altered when the class is decorated via `meta()`. Furthermore, object(s) of sensitive nature would have to be stored as metadata, before this can lead to a security impact. The issue has been patched in version `0.6.1`.

aedart

Unauth. Reflected Cross-Site Scripting (XSS) vulnerability in Cththemes Monolit theme <= 2.0.6 versions.

cththemes

angular-server-side-configuration helps configure an angular application at runtime on the server or in a docker container via environment variables. angular-server-side-configuration detects used environment variables in TypeScript (.ts) files during build time of an Angular CLI project. The detected environment variables are written to a ngssc.json file in the output directory. During deployment of an Angular based app, the environment variables based on the variables from ngssc.json are inserted into the apps index.html (or defined index file). With version 15.0.0 the environment variable detection was widened to the entire project, relative to the angular.json file from the Angular CLI. In a monorepo setup, this could lead to environment variables intended for a backend/service to be detected and written to the ngssc.json, which would then be populated and exposed via index.html. This has NO IMPACT, in a plain Angular project that has no backend component. This vulnerability has been mitigated in version 15.1.0, by adding an option `searchPattern` which restricts the detection file range by default. As a workaround, manually edit or create ngssc.json or run script after ngssc.json generation.

angular-server-side-configuration_project

The mono package before 6.8.0.105+dfsg-3.3 for Debian allows arbitrary code execution because the application/x-ms-dos-executable MIME type is associated with an un-sandboxed Mono CLR interpreter.

mono-project · debian

Kardex Mlog MCC 5.7.12+0-a203c2a213-master allows remote code execution. It spawns a web interface listening on port 8088. A user-controllable path is handed to a path-concatenation method (Path.Combine from .NET) without proper sanitisation. This yields the possibility of including local files, as well as remote files on SMB shares. If one provides a file with the extension .t4, it is rendered with the .NET templating engine mono/t4, which can execute code.

kardex

Command injection vulnerability in nw_interface.html in SHARP multifunction printers (MFPs)'s Digital Full-color Multifunctional System 202 or earlier, 120 or earlier, 600 or earlier, 121 or earlier, 500 or earlier, 402 or earlier, 790 or earlier, and Digital Multifunctional System (Monochrome) 200 or earlier, 211 or earlier, 102 or earlier, 453 or earlier, 400 or earlier, 202 or earlier, 602 or earlier, 500 or earlier, 401 or earlier allows remote attackers to execute arbitrary commands via unspecified vectors.

sharp

This affects all versions of package monorepo-build.

monorepo-build_project

The cinemaproject/monorepo repository through 2021-03-03 on GitHub allows absolute path traversal because the Flask send_file function is used unsafely.

monorepo_project

A vulnerability has been identified in JT2Go (All versions < V13.3.0.3), Teamcenter Visualization V13.3 (All versions < V13.3.0.3), Teamcenter Visualization V14.0 (All versions < V14.0.0.1). The Mono_Loader.dll library is vulnerable to integer overflow condition while parsing specially crafted TG4 files. An attacker could leverage this vulnerability to crash the application causing denial of service condition.

siemens

SuiteCRM through 7.12.1 and 8.x through 8.0.1 allows Remote Code Execution. Authenticated users with access to the Scheduled Reports module can achieve this by leveraging PHP deserialization in the email_recipients property. By using a crafted request, they can create a malicious report, containing a PHP-deserialization payload in the email_recipients field. Once someone accesses this report, the backend will deserialize the content of the email_recipients field and the payload gets executed. Project dependencies include a number of interesting PHP deserialization gadgets (e.g., Monolog/RCE1 from phpggc) that can be used for Code Execution.

salesagility

GraphiQL is the reference implementation of this monorepo, GraphQL IDE, an official project under the GraphQL Foundation. All versions of graphiql older than graphiql@1.4.7 are vulnerable to compromised HTTP schema introspection responses or schema prop values with malicious GraphQL type names, exposing a dynamic XSS attack surface that can allow code injection on operation autocomplete. In order for the attack to take place, the user must load a vulnerable schema in graphiql. There are a number of ways that can occur. By default, the schema URL is not attacker-controllable in graphiql or in its suggested implementations or examples, leaving only very complex attack vectors. If a custom implementation of graphiql's fetcher allows the schema URL to be set dynamically, such as a URL query parameter like ?endpoint= in graphql-playground, or a database provided value, then this custom graphiql implementation is vulnerable to phishing attacks, and thus much more readily available, low or no privelege level xss attacks. The URLs could look like any generic looking graphql schema URL. It should be noted that desktop clients such as Altair, Insomnia, Postwoman, do not appear to be impacted by this. This vulnerability does not impact codemirror-graphql, monaco-graphql or other dependents, as it exists in onHasCompletion.ts in graphiql. It does impact all forks of graphiql, and every released version of graphiql.

graphql

TensorFlow is an end-to-end open source platform for machine learning. When a user does not supply arguments that determine a valid sparse tensor, `tf.raw_ops.SparseTensorSliceDataset` implementation can be made to dereference a null pointer. The [implementation](https://github.com/tensorflow/tensorflow/blob/8d72537c6abf5a44103b57b9c2e22c14f5f49698/tensorflow/core/kernels/data/sparse_tensor_slice_dataset_op.cc#L240-L251) has some argument validation but fails to consider the case when either `indices` or `values` are provided for an empty sparse tensor when the other is not. If `indices` is empty, then [code that performs validation](https://github.com/tensorflow/tensorflow/blob/8d72537c6abf5a44103b57b9c2e22c14f5f49698/tensorflow/core/kernels/data/sparse_tensor_slice_dataset_op.cc#L260-L261) (i.e., checking that the indices are monotonically increasing) results in a null pointer dereference. If `indices` as provided by the user is empty, then `indices` in the C++ code above is backed by an empty `std::vector`, hence calling `indices->dim_size(0)` results in null pointer dereferencing (same as calling `std::vector::at()` on an empty vector). We have patched the issue in GitHub commit 02cc160e29d20631de3859c6653184e3f876b9d7. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

google

A vulnerability has been identified in JT2Go (All versions < V13.2), Teamcenter Visualization (All versions < V13.2). The Mono_loader.dll library in affected applications lacks proper validation of user-supplied data when parsing J2K files. This could result in an out of bounds write past the end of an allocated structure. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-13352)

siemens

On NXP MIFARE Ultralight and NTAG cards, an attacker can interrupt a write operation (aka conduct a "tear off" attack) over RFID to bypass a Monotonic Counter protection mechanism. The impact depends on how the anti tear-off feature is used in specific applications such as public transportation, physical access control, etc.

nxp

The All in One SEO – Best WordPress SEO Plugin – Easily Improve Your SEO Rankings before 4.1.0.2 enables authenticated users with "aioseo_tools_settings" privilege (most of the time admin) to execute arbitrary code on the underlying host. Users can restore plugin's configuration by uploading a backup .ini file in the section "Tool > Import/Export". However, the plugin attempts to unserialize values of the .ini file. Moreover, the plugin embeds Monolog library which can be used to craft a gadget chain and thus trigger system command execution.

aioseo

Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.

mitsubishielectric