A security flaw has been discovered in Totolink LR350 9.3.5u.6369_B20220309. Impacted is the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument command results in command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

totolink

In the Linux kernel, the following vulnerability has been resolved: MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used, and this macro can generate more than 2 instructions. At the same time, the code in ftrace assumes that no more than 2 instructions can be generated, which is why it stores them in an int[2] array. However, as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA) causes a buffer overflow when _mcount is beyond 32 bits. This leads to corruption of the variables located in the __read_mostly section. This corruption was observed because the variable __cpu_primary_thread_mask was corrupted, causing a hang very early during boot. This fix prevents the corruption by avoiding the generation of instructions if they could exceed 2 instructions in length. Fortunately, insn_la_mcount is only used if the instrumented code is located outside the kernel code section, so dynamic ftrace can still be used, albeit in a more limited scope. This is still preferable to corrupting memory and/or crashing the kernel.

linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, Validate format string parameters Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all format specifiers in trace strings are limited to safe integer/hex formats (%x, %d, %i, %u, %llx, %lx, etc.). Reject strings containing other format types that could be used to access arbitrary memory or cause crashes. Invalid format strings are added to the trace output for visibility with "BAD_FORMAT: " prefix.

Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment.

ateme

SOUND4 IMPACT/FIRST/PULSE/Eco <=2.x contains a conditional command injection vulnerability that allows local authenticated users to create malicious files in the /tmp directory. Unauthenticated attackers can execute commands by making a single HTTP POST request to the traceroute.php script, which triggers the malicious file and then deletes it after execution.

sound4

SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x contains a network vulnerability that allows unauthenticated attackers to send ICMP signals to arbitrary hosts through network command scripts. Attackers can abuse ping.php, traceroute.php, and dns.php to generate network flooding attacks targeting external hosts.

sound4

In the Linux kernel, the following vulnerability has been resolved: arm64: set __exception_irq_entry with __irq_entry as a default filter_irq_stacks() is supposed to cut entries which are related irq entries from its call stack. And in_irqentry_text() which is called by filter_irq_stacks() uses __irqentry_text_start/end symbol to find irq entries in callstack. But it doesn't work correctly as without "CONFIG_FUNCTION_GRAPH_TRACER", arm64 kernel doesn't include gic_handle_irq which is entry point of arm64 irq between __irqentry_text_start and __irqentry_text_end as we discussed in below link. https://lore.kernel.org/all/CACT4Y+aReMGLYua2rCLHgFpS9io5cZC04Q8GLs-uNmrn1ezxYQ@mail.gmail.com/#t This problem can makes unintentional deep call stack entries especially in KASAN enabled situation as below. [ 2479.383395]I[0:launcher-loader: 1719] Stack depot reached limit capacity [ 2479.383538]I[0:launcher-loader: 1719] WARNING: CPU: 0 PID: 1719 at lib/stackdepot.c:129 __stack_depot_save+0x464/0x46c [ 2479.385693]I[0:launcher-loader: 1719] pstate: 624000c5 (nZCv daIF +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 2479.385724]I[0:launcher-loader: 1719] pc : __stack_depot_save+0x464/0x46c [ 2479.385751]I[0:launcher-loader: 1719] lr : __stack_depot_save+0x460/0x46c [ 2479.385774]I[0:launcher-loader: 1719] sp : ffffffc0080073c0 [ 2479.385793]I[0:launcher-loader: 1719] x29: ffffffc0080073e0 x28: ffffffd00b78a000 x27: 0000000000000000 [ 2479.385839]I[0:launcher-loader: 1719] x26: 000000000004d1dd x25: ffffff891474f000 x24: 00000000ca64d1dd [ 2479.385882]I[0:launcher-loader: 1719] x23: 0000000000000200 x22: 0000000000000220 x21: 0000000000000040 [ 2479.385925]I[0:launcher-loader: 1719] x20: ffffffc008007440 x19: 0000000000000000 x18: 0000000000000000 [ 2479.385969]I[0:launcher-loader: 1719] x17: 2065726568207475 x16: 000000000000005e x15: 2d2d2d2d2d2d2d20 [ 2479.386013]I[0:launcher-loader: 1719] x14: 5d39313731203a72 x13: 00000000002f6b30 x12: 00000000002f6af8 [ 2479.386057]I[0:launcher-loader: 1719] x11: 00000000ffffffff x10: ffffffb90aacf000 x9 : e8a74a6c16008800 [ 2479.386101]I[0:launcher-loader: 1719] x8 : e8a74a6c16008800 x7 : 00000000002f6b30 x6 : 00000000002f6af8 [ 2479.386145]I[0:launcher-loader: 1719] x5 : ffffffc0080070c8 x4 : ffffffd00b192380 x3 : ffffffd0092b313c [ 2479.386189]I[0:launcher-loader: 1719] x2 : 0000000000000001 x1 : 0000000000000004 x0 : 0000000000000022 [ 2479.386231]I[0:launcher-loader: 1719] Call trace: [ 2479.386248]I[0:launcher-loader: 1719] __stack_depot_save+0x464/0x46c [ 2479.386273]I[0:launcher-loader: 1719] kasan_save_stack+0x58/0x70 [ 2479.386303]I[0:launcher-loader: 1719] save_stack_info+0x34/0x138 [ 2479.386331]I[0:launcher-loader: 1719] kasan_save_free_info+0x18/0x24 [ 2479.386358]I[0:launcher-loader: 1719] ____kasan_slab_free+0x16c/0x170 [ 2479.386385]I[0:launcher-loader: 1719] __kasan_slab_free+0x10/0x20 [ 2479.386410]I[0:launcher-loader: 1719] kmem_cache_free+0x238/0x53c [ 2479.386435]I[0:launcher-loader: 1719] mempool_free_slab+0x1c/0x28 [ 2479.386460]I[0:launcher-loader: 1719] mempool_free+0x7c/0x1a0 [ 2479.386484]I[0:launcher-loader: 1719] bvec_free+0x34/0x80 [ 2479.386514]I[0:launcher-loader: 1719] bio_free+0x60/0x98 [ 2479.386540]I[0:launcher-loader: 1719] bio_put+0x50/0x21c [ 2479.386567]I[0:launcher-loader: 1719] f2fs_write_end_io+0x4ac/0x4d0 [ 2479.386594]I[0:launcher-loader: 1719] bio_endio+0x2dc/0x300 [ 2479.386622]I[0:launcher-loader: 1719] __dm_io_complete+0x324/0x37c [ 2479.386650]I[0:launcher-loader: 1719] dm_io_dec_pending+0x60/0xa4 [ 2479.386676]I[0:launcher-loader: 1719] clone_endio+0xf8/0x2f0 [ 2479.386700]I[0:launcher-loader: 1719] bio_endio+0x2dc/0x300 [ 2479.386727]I[0:launcher-loader: 1719] blk_update_request+0x258/0x63c [ 2479.386754]I[0:launcher-loader: 1719] scsi_end_request+0x50/0x304 [ 2479.386782]I[0:launcher-loader: 1719] scsi_io_completion+0x88/0x160 [ 2479.386808]I[0:launcher-loader: 1719] scsi_finish_command+0x17c/0x194 [ 2479.386833]I ---truncated---

In the Linux kernel, the following vulnerability has been resolved: audit: fix possible soft lockup in __audit_inode_child() Tracefs or debugfs maybe cause hundreds to thousands of PATH records, too many PATH records maybe cause soft lockup. For example: 1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n 2. auditctl -a exit,always -S open -k key 3. sysctl -w kernel.watchdog_thresh=5 4. mkdir /sys/kernel/debug/tracing/instances/test There may be a soft lockup as follows: watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498] Kernel panic - not syncing: softlockup: hung tasks Call trace: dump_backtrace+0x0/0x30c show_stack+0x20/0x30 dump_stack+0x11c/0x174 panic+0x27c/0x494 watchdog_timer_fn+0x2bc/0x390 __run_hrtimer+0x148/0x4fc __hrtimer_run_queues+0x154/0x210 hrtimer_interrupt+0x2c4/0x760 arch_timer_handler_phys+0x48/0x60 handle_percpu_devid_irq+0xe0/0x340 __handle_domain_irq+0xbc/0x130 gic_handle_irq+0x78/0x460 el1_irq+0xb8/0x140 __audit_inode_child+0x240/0x7bc tracefs_create_file+0x1b8/0x2a0 trace_create_file+0x18/0x50 event_create_dir+0x204/0x30c __trace_add_new_event+0xac/0x100 event_trace_add_tracer+0xa0/0x130 trace_array_create_dir+0x60/0x140 trace_array_create+0x1e0/0x370 instance_mkdir+0x90/0xd0 tracefs_syscall_mkdir+0x68/0xa0 vfs_mkdir+0x21c/0x34c do_mkdirat+0x1b4/0x1d4 __arm64_sys_mkdirat+0x4c/0x60 el0_svc_common.constprop.0+0xa8/0x240 do_el0_svc+0x8c/0xc0 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Therefore, we add cond_resched() to __audit_inode_child() to fix it.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

edimax

Command injection vulnerability in the operating system in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2 through the 'GetDNS()', 'CheckPing()' and 'TraceRoute()' functions.

circutor

A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited.

dlink

An issue was discovered in PyTorch v2.5 and v2.7.1. Omission of profiler.stop() can cause torch.profiler.profile (PythonTracer) to crash or hang during finalization, leading to a Denial of Service (DoS).

linuxfoundation

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not swap cpu_buffer during resize process When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Handle race between rb_move_tail and rb_check_pages It seems a data race between ring_buffer writing and integrity check. That is, RB_FLAG of head_page is been updating, while at same time RB_FLAG was cleared when doing integrity check rb_check_pages(): rb_check_pages() rb_handle_head_page(): -------- -------- rb_head_page_deactivate() rb_head_page_set_normal() rb_head_page_activate() We do intergrity test of the list to check if the list is corrupted and it is still worth doing it. So, let's refactor rb_check_pages() such that we no longer clear and set flag during the list sanity checking. [1] and [2] are the test to reproduce and the crash report respectively. 1: ``` read_trace.sh while true; do # the "trace" file is closed after read head -1 /sys/kernel/tracing/trace > /dev/null done ``` ``` repro.sh sysctl -w kernel.panic_on_warn=1 # function tracer will writing enough data into ring_buffer echo function > /sys/kernel/tracing/current_tracer ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ``` 2: ------------[ cut here ]------------ WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653 rb_move_tail+0x450/0x470 Modules linked in: CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:rb_move_tail+0x450/0x470 Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24 83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83 f8 02 0f 84 ce fb ff ff e9 db RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203 RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18 RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400 RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2 R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000 R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108 FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0 Call Trace: <TASK> ring_buffer_lock_reserve+0x136/0x360 ? __do_softirq+0x287/0x2df ? __pfx_rcu_softirq_qs+0x10/0x10 trace_function+0x21/0x110 ? __pfx_rcu_softirq_qs+0x10/0x10 ? __do_softirq+0x287/0x2df function_trace_call+0xf6/0x120 0xffffffffc038f097 ? rcu_softirq_qs+0x5/0x140 rcu_softirq_qs+0x5/0x140 __do_softirq+0x287/0x2df run_ksoftirqd+0x2a/0x30 smpboot_thread_fn+0x188/0x220 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0xe7/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> ---[ end trace 0000000000000000 ]--- [ crash report and test reproducer credit goes to Zheng Yejian]

A flaw has been found in D-Link DIR-823X 250416. This issue affects some unknown processing of the file /goform/diag_traceroute. Executing manipulation of the argument target_addr can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.

dlink

In 2wcom IP-4c 2.16, the web interface allows admin and manager users to execute arbitrary code as root via a ping or traceroute field on the TCP/IP screen.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers.

linux · debian

D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the traceroute6 function.

dlink

Jointelli 5G CPE 21H01 firmware JY_21H01_A3_v1.36 devices allow (blind) OS command injection. Multiple endpoints are vulnerable, including /ubus/?flag=set_WPS_pin and /ubus/?flag=netAppStar1 and /ubus/?flag=set_wifi_cfgs. This allows an authenticated attacker to execute arbitrary OS commands with root privileges via crafted inputs to the SSID, WPS, Traceroute, and Ping fields.

Command injection vulnerability in Nexxt Solutions NCM-X1800 Mesh Router versions UV1.2.7 and below, allowing authenticated attackers to execute arbitrary commands on the device. The vulnerability is present in the web management interface's ping and traceroute functionality, specifically in the /web/um_ping_set.cgi endpoint. The application fails to properly sanitize user input in the `Ping_host_text` parameter before passing it to the underlying system command, allowing attackers to inject and execute arbitrary shell commands as the root user.

A vulnerability was found in TOTOLINK T6 4.1.5cu.748_B20211015. It has been declared as critical. This vulnerability affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component HTTP POST Request Handler. The manipulation of the argument command leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

totolink

Meshtastic is an open source mesh networking solution. Prior to 2.5.1, traceroute responses from the remote node are not rate limited. Given that there are SNR measurements attributed to each received transmission, this is a guaranteed way to get a remote station to reliably and continuously respond. You could easily get 100 samples in a short amount of time (estimated 2 minutes), whereas passively doing the same could take hours or days. There are secondary effects that non-ratelimited traceroute does also allow a 2:1 reflected DoS of the network as well, but these concerns are less than the problem with positional confidentiality (other DoS routes exist). This vulnerability is fixed in 2.5.1.

meshtastic