A stack buffer overflow vulnerability exists in wolfSSL's PKCS7 SignedData encoding functionality. In wc_PKCS7_BuildSignedAttributes(), when adding custom signed attributes, the code passes an incorrect capacity value (esd->signedAttribsCount) to EncodeAttributes() instead of the remaining available space in the fixed-size signedAttribs[7] array. When an application sets pkcs7->signedAttribsSz to a value greater than MAX_SIGNED_ATTRIBS_SZ (default 7) minus the number of default attributes already added, EncodeAttributes() writes beyond the array bounds, causing stack memory corruption. In WOLFSSL_SMALL_STACK builds, this becomes heap corruption. Exploitation requires an application that allows untrusted input to control the signedAttribs array size when calling wc_PKCS7_EncodeSignedData() or related signing functions.

wolfssl

A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.  Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.  This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.  The issue affects versions up to and including 5.8.2.

Multiple constant-time implementations in wolfSSL before version 5.8.4 may be transformed into non-constant-time binary by LLVM optimizations, which can potentially result in observable timing discrepancies and lead to information disclosure through timing side-channel attacks.

Improper input validation in the TLS 1.3 KeyShareEntry parsing in wolfSSL v5.8.2 on multiple platforms allows a remote unauthenticated attacker to cause a denial-of-service by sending a crafted ClientHello message containing duplicate KeyShareEntry values for the same supported group, leading to excessive CPU and memory consumption during ClientHello processing.

wolfssl

Improper input validation in the TLS 1.3 CertificateVerify signature algorithm negotiation in wolfSSL 5.8.2 and earlier on multiple platforms allows for downgrading the signature algorithm used. For example when a client sends ECDSA P521 as the supported signature algorithm the server previously could respond as ECDSA P256 being the accepted signature algorithm and the connection would continue with using ECDSA P256, if the client supports ECDSA P256.

wolfssl · apple · linux

Improper Input Validation in the TLS 1.3 CKS extension parsing in wolfSSL 5.8.2 and earlier on multiple platforms allows a remote unauthenticated attacker to potentially cause a denial-of-service via a crafted ClientHello message with duplicate CKS extensions.

wolfssl · apple · linux

In wolfSSL release 5.8.2 blinding support is turned on by default for Curve25519 in applicable builds. The blinding configure option is only for the base C implementation of Curve25519. It is not needed, or available with; ARM assembly builds, Intel assembly builds, and the small Curve25519 feature. While the side-channel attack on extracting a private key would be very difficult to execute in practice, enabling blinding provides an additional layer of protection for devices that may be more susceptible to physical access or side-channel observation.

wolfssl

A certificate verification error in wolfSSL when building with the WOLFSSL_SYS_CA_CERTS and WOLFSSL_APPLE_NATIVE_CERT_VALIDATION options results in the wolfSSL client failing to properly verify the server certificate's domain name, allowing any certificate issued by a trusted CA to be accepted regardless of the hostname.

In the OpenSSL compatibility layer implementation, the function RAND_poll() was not behaving as expected and leading to the potential for predictable values returned from RAND_bytes() after fork() is called. This can lead to weak or predictable random numbers generated in applications that are both using RAND_bytes() and doing fork() operations. This only affects applications explicitly calling RAND_bytes() after fork() and does not affect any internal TLS operations. Although RAND_bytes() documentation in OpenSSL calls out not being safe for use with fork() without first calling RAND_poll(), an additional code change was also made in wolfSSL to make RAND_bytes() behave similar to OpenSSL after a fork() call without calling RAND_poll(). Now the Hash-DRBG used gets reseeded after detecting running in a new process. If making use of RAND_bytes() and calling fork() we recommend updating to the latest version of wolfSSL. Thanks to Per Allansson from Appgate for the report.

wolfssl

libcurl supports *pinning* of the server certificate public key for HTTPS transfers. Due to an omission, this check is not performed when connecting with QUIC for HTTP/3, when the TLS backend is wolfSSL. Documentation says the option works with wolfSSL, failing to specify that it does not for QUIC and HTTP/3. Since pinning makes the transfer succeed if the pin is fine, users could unwittingly connect to an impostor server without noticing.

haxx

Fault Injection vulnerability in wc_ed25519_sign_msg function in wolfssl/wolfcrypt/src/ed25519.c in WolfSSL wolfssl5.6.6 on Linux/Windows allows remote attacker co-resides in the same system with a victim process to disclose information and escalate privileges via Rowhammer fault injection to the ed25519_key structure.

wolfssl · linux · microsoft

Fault Injection vulnerability in RsaPrivateDecryption function in wolfssl/wolfcrypt/src/rsa.c in WolfSSL wolfssl5.6.6 on Linux/Windows allows remote attacker co-resides in the same system with a victim process to disclose information and escalate privileges via Rowhammer fault injection to the RsaKey structure.

wolfssl · linux · microsoft

The side-channel protected T-Table implementation in wolfSSL up to version 5.6.5 protects against a side-channel attacker with cache-line resolution. In a controlled environment such as Intel SGX, an attacker can gain a per instruction sub-cache-line resolution allowing them to break the cache-line-level protection. For details on the attack refer to: https://doi.org/10.46586/tches.v2024.i1.457-500

wolfssl

In function MatchDomainName(), input param str is treated as a NULL terminated string despite being user provided and unchecked. Specifically, the function X509_check_host() takes in a pointer and length to check against, with no requirements that it be NULL terminated. If a caller was attempting to do a name check on a non-NULL terminated buffer, the code would read beyond the bounds of the input array until it found a NULL terminator.This issue affects wolfSSL: through 5.7.0.

wolfssl

An issue was discovered in wolfSSL before 5.7.0. A safe-error attack via Rowhammer, namely FAULT+PROBE, leads to ECDSA key disclosure. When WOLFSSL_CHECK_SIG_FAULTS is used in signing operations with private ECC keys, such as in server-side TLS connections, the connection is halted if any fault occurs. The success rate in a certain amount of connection requests can be processed via an advanced technique for ECDSA key recovery.

wolfssl

libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.

haxx · apple · netapp

In wolfSSL prior to 5.6.6, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS client or network attacker can trigger a buffer over-read on the heap of 5 bytes (WOLFSSL_CALLBACKS is only intended for debugging).

wolfssl

wolfSSL prior to 5.6.6 did not check that messages in one (D)TLS record do not span key boundaries. As a result, it was possible to combine (D)TLS messages using different keys into one (D)TLS record. The most extreme edge case is that, in (D)TLS 1.3, it was possible that an unencrypted (D)TLS 1.3 record from the server containing first a ServerHello message and then the rest of the first server flight would be accepted by a wolfSSL client. In (D)TLS 1.3 the handshake is encrypted after the ServerHello but a wolfSSL client would accept an unencrypted flight from the server. This does not compromise key negotiation and authentication so it is assigned a low severity rating.

wolfssl

wolfSSL SP Math All RSA implementation is vulnerable to the Marvin Attack, new variation of a timing Bleichenbacher style attack, when built with the following options to configure: --enable-all CFLAGS="-DWOLFSSL_STATIC_RSA" The define “WOLFSSL_STATIC_RSA” enables static RSA cipher suites, which is not recommended, and has been disabled by default since wolfSSL 3.6.6.  Therefore the default build since 3.6.6, even with "--enable-all", is not vulnerable to the Marvin Attack. The vulnerability is specific to static RSA cipher suites, and expected to be padding-independent. The vulnerability allows an attacker to decrypt ciphertexts and forge signatures after probing with a large number of test observations. However the server’s private key is not exposed.

wolfssl

If a TLS 1.3 client gets neither a PSK (pre shared key) extension nor a KSE (key share extension) when connecting to a malicious server, a default predictable buffer gets used for the IKM (Input Keying Material) value when generating the session master secret. Using a potentially known IKM value when generating the session master secret key compromises the key generated, allowing an eavesdropper to reconstruct it and potentially allowing access to or meddling with message contents in the session. This issue does not affect client validation of connected servers, nor expose private key information, but could result in an insecure TLS 1.3 session when not controlling both sides of the connection. wolfSSL recommends that TLS 1.3 client side users update the version of wolfSSL used. 

wolfssl

In wolfSSL before 5.5.2, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS 1.3 client or network attacker can trigger a buffer over-read on the heap of 5 bytes. (WOLFSSL_CALLBACKS is only intended for debugging.)

wolfssl

An issue was discovered in wolfSSL before 5.5.0. A fault injection attack on RAM via Rowhammer leads to ECDSA key disclosure. Users performing signing operations with private ECC keys, such as in server-side TLS connections, might leak faulty ECC signatures. These signatures can be processed via an advanced technique for ECDSA key recovery. (In 5.5.0 and later, WOLFSSL_CHECK_SIG_FAULTS can be used to address the vulnerability.)

wolfssl