eNet SMART HOME server 2.2.1 and 2.3.1 contains a missing authorization vulnerability in the deleteUserAccount JSON-RPC method that permits any authenticated low-privileged user (UG_USER) to delete arbitrary user accounts, except for the built-in admin account. The application does not enforce role-based access control on this function, allowing a standard user to submit a crafted POST request to /jsonrpc/management specifying another username to have that account removed without elevated permissions or additional confirmation.

jung-group

eNet SMART HOME server 2.2.1 and 2.3.1 ships with default credentials (user:user, admin:admin) that remain active after installation and commissioning without enforcing a mandatory password change. Unauthenticated attackers can use these default credentials to gain administrative access to sensitive smart home configuration and control functions.

jung-group

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix memory leak in smb2_open_file() Reproducer: 1. server: directories are exported read-only 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct 4. client: umount /mnt 5. client: sleep 1 6. client: modprobe -r cifs The error message is as follows: ============================================================================= BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Object 0x00000000d47521be @offset=14336 ... WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577 ... Call Trace: <TASK> kmem_cache_destroy+0x94/0x190 cifs_destroy_request_bufs+0x3e/0x50 [cifs] cleanup_module+0x4e/0x540 [cifs] __se_sys_delete_module+0x278/0x400 __x64_sys_delete_module+0x5f/0x70 x64_sys_call+0x2299/0x2ff0 do_syscall_64+0x89/0x350 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs] WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577

linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6 route. [0] Commit f72514b3c569 ("ipv6: clear RA flags when adding a static route") introduced logic to clear RTF_ADDRCONF from existing routes when a static route with the same nexthop is added. However, this causes a problem when the existing route has a gateway. When RTF_ADDRCONF is cleared from a route that has a gateway, that route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns true. The issue is that this route was never added to the fib6_siblings list. This leads to a mismatch between the following counts: - The sibling count computed by iterating fib6_next chain, which includes the newly ECMP-eligible route - The actual siblings in fib6_siblings list, which does not include that route When a subsequent ECMP route is added, fib6_add_rt2node() hits BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the counts don't match. Fix this by only clearing RTF_ADDRCONF when the existing route does not have a gateway. Routes without a gateway cannot qualify for ECMP anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing RTF_ADDRCONF on them is safe and matches the original intent of the commit. [0]: kernel BUG at net/ipv6/ip6_fib.c:1217! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217 [...] Call Trace: <TASK> fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532 __ip6_ins_rt net/ipv6/route.c:1351 [inline] ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946 ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571 inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577 sock_do_ioctl+0xdc/0x300 net/socket.c:1245 sock_ioctl+0x576/0x790 net/socket.c:1366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

linux

In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ]

linux

In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root.

In the Linux kernel, the following vulnerability has been resolved: mm, shmem: prevent infinite loop on truncate race When truncating a large swap entry, shmem_free_swap() returns 0 when the entry's index doesn't match the given index due to lookup alignment. The failure fallback path checks if the entry crosses the end border and aborts when it happens, so truncate won't erase an unexpected entry or range. But one scenario was ignored. When `index` points to the middle of a large swap entry, and the large swap entry doesn't go across the end border, find_get_entries() will return that large swap entry as the first item in the batch with `indices[0]` equal to `index`. The entry's base index will be smaller than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the "base < index" check. The code will then call shmem_confirm_swap(), get the order, check if it crosses the END boundary (which it doesn't), and retry with the same index. The next iteration will find the same entry again at the same index with same indices, leading to an infinite loop. Fix this by retrying with a round-down index, and abort if the index is smaller than the truncate range.

In the Linux kernel, the following vulnerability has been resolved: perf: sched: Fix perf crash with new is_user_task() helper In order to do a user space stacktrace the current task needs to be a user task that has executed in user space. It use to be possible to test if a task is a user task or not by simply checking the task_struct mm field. If it was non NULL, it was a user task and if not it was a kernel task. But things have changed over time, and some kernel tasks now have their own mm field. An idea was made to instead test PF_KTHREAD and two functions were used to wrap this check in case it became more complex to test if a task was a user task or not[1]. But this was rejected and the C code simply checked the PF_KTHREAD directly. It was later found that not all kernel threads set PF_KTHREAD. The io-uring helpers instead set PF_USER_WORKER and this needed to be added as well. But checking the flags is still not enough. There's a very small window when a task exits that it frees its mm field and it is set back to NULL. If perf were to trigger at this moment, the flags test would say its a user space task but when perf would read the mm field it would crash with at NULL pointer dereference. Now there are flags that can be used to test if a task is exiting, but they are set in areas that perf may still want to profile the user space task (to see where it exited). The only real test is to check both the flags and the mm field. Instead of making this modification in every location, create a new is_user_task() helper function that does all the tests needed to know if it is safe to read the user space memory or not. [1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/

linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already (either globally or within a cgroup of the running task), we will not let the task exit from balance_dirty_pages() until the number of dirty pages drops below the limit. So in this particular case, as I already mentioned, there was a cgroup with relatively small amount of memory and as a result with dirty limit set at 16MB. A task from that cgroup has dirtied about 28MB worth of pages in btrfs btree inode and these were practically the only dirty pages in that cgroup. So that means the only way to reduce the dirty pages of that cgroup is to writeback the dirty pages of btrfs btree inode, and only after that those processes can exit balance_dirty_pages(). Now back to the btrfs part, btree_writepages() is responsible for writing back dirty btree inode pages. The problem here is, there is a btrfs internal threshold that if the btree inode's dirty bytes are below the 32M threshold, it will not do any writeback. This behavior is to batch as much metadata as possible so we won't write back those tree blocks and then later re-COW them again for another modification. This internal 32MiB is higher than the existing dirty page size (28MiB), meaning no writeback will happen, causing a deadlock between btrfs and cgroup: - Btrfs doesn't want to write back btree inode until more dirty pages - Cgroup/MM doesn't want more dirty pages for btrfs btree inode Thus any process touching that btree inode is put into sleep until the number of dirty pages is reduced. Thanks Jan Kara a lot for the analysis of the root cause. [ENHANCEMENT] Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the btree_inode"), btrfs btree inode pages will only be charged to the root cgroup which should have a much larger limit than btrfs' 32MiB threshold. So it should not affect newer kernels. But for all current LTS kernels, they are all affected by this problem, and backporting the whole AS_KERNEL_FILE may not be a good idea. Even for newer kernels I still think it's a good idea to get rid of the internal threshold at btree_writepages(), since for most cases cgroup/MM has a better view of full system memory usage than btrfs' fixed threshold. For internal callers using btrfs_btree_balance_dirty() since that function is already doing internal threshold check, we don't need to bother them. But for external callers of btree_writepages(), just respect their requests and write back whatever they want, ignoring the internal btrfs threshold to avoid such deadlock on btree inode dirty page balancing.

linux

In the Linux kernel, the following vulnerability has been resolved: igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue The previous 7 KB per queue caused TX unit hangs under heavy timestamping load. Reducing to 5 KB avoids these hangs and matches the TSN recommendation in I225/I226 SW User Manual Section 7.5.4. The 8 KB "freed" by this change is currently unused. This reduction is not expected to impact throughput, as the i226 is PCIe-limited for small TSN packets rather than TX-buffer-limited.

linux

In the Linux kernel, the following vulnerability has been resolved: serial: Fix not set tty->port race condition Revert commit bfc467db60b7 ("serial: remove redundant tty_port_link_device()") because the tty_port_link_device() is not redundant: the tty->port has to be confured before we call uart_configure_port(), otherwise user-space can open console without TTY linked to the driver. This tty_port_link_device() was added explicitly to avoid this exact issue in commit fb2b90014d78 ("tty: link tty and port before configuring it as console"), so offending commit basically reverted the fix saying it is redundant without addressing the actual race condition presented there. Reproducible always as tty->port warning on Qualcomm SoC with most of devices disabled, so with very fast boot, and one serial device being the console: printk: legacy console [ttyMSM0] enabled printk: legacy console [ttyMSM0] enabled printk: legacy bootconsole [qcom_geni0] disabled printk: legacy bootconsole [qcom_geni0] disabled ------------[ cut here ]------------ tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver! WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1 Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6 CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. Eliza (DT) ... tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P) tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3)) chrdev_open (fs/char_dev.c:411) do_dentry_open (fs/open.c:962) vfs_open (fs/open.c:1094) do_open (fs/namei.c:4634) path_openat (fs/namei.c:4793) do_filp_open (fs/namei.c:4820) do_sys_openat2 (fs/open.c:1391 (discriminator 3)) ... Starting Network Name Resolution... Apparently the flow with this small Yocto-based ramdisk user-space is: driver (qcom_geni_serial.c): user-space: ============================ =========== qcom_geni_serial_probe() uart_add_one_port() serial_core_register_port() serial_core_add_one_port() uart_configure_port() register_console() | | open console | ... | tty_init_dev() | driver->ports[idx] is NULL | tty_port_register_device_attr_serdev() tty_port_link_device() <- set driver->ports[idx]

linux

The Smart Forms plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'rednao_smart_forms_get_campaigns' AJAX action in all versions up to, and including, 2.6.99. This makes it possible for authenticated attackers, with Subscriber-level access and above, to retrieve donation campaign data including campaign IDs and names.

The PixelYourSite – Your smart PIXEL (TAG) & API Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pysTrafficSource' parameter and the 'pys_landing_page' parameter in all versions up to, and including, 11.2.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. CVE-2026-27072 is likely a duplicate of this issue.

A Stack Overflow vulnerability was discovered in the TON Virtual Machine (TVM) before v2024.10. The vulnerability stems from the improper handling of vmstate and continuation jump instructions, which allow for continuous dynamic tail calls. An attacker can exploit this by crafting a smart contract with deeply nested jump logic. Even within permissible gas limits, this nested execution exhausts the host process's stack space, causing the validator node to crash. This results in a Denial of Service (DoS) for the TON blockchain network.

A Null Pointer Dereference vulnerability exists in the TON Virtual Machine (TVM) within the TON Blockchain before v2025.06. The issue is located in the execution logic of the INMSGPARAM instruction, where the program fails to validate if a specific pointer is null before accessing it. By sending a malicious transaction or smart contract, an attacker can trigger this null pointer dereference, causing the validator node process to crash (segmentation fault). This results in a Denial of Service (DoS) affecting the availability of the entire blockchain network.

Calero VeraSMART versions prior to 2022 R1 use static ASP.NET/IIS machineKey values configured for the VeraSMART web application and stored in C:\\Program Files (x86)\\Veramark\\VeraSMART\\WebRoot\\web.config. An attacker who obtains these keys can craft a valid ASP.NET ViewState payload that passes integrity validation and is accepted by the application, resulting in server-side deserialization and remote code execution in the context of the IIS application.

calero

Calero VeraSMART versions prior to 2026 R1 contain hardcoded static AES encryption keys within Veramark.Framework.dll (Veramark.Core.Config class). These keys are used to encrypt the password of the service account stored in C:\\VeraSMART Data\\app.settings. An attacker with local access to the system can extract the hardcoded keys from the Veramark.Framework.dll module and decrypt the stored credentials. The recovered credentials can then be used to authenticate to the Windows host, potentially resulting in local privilege escalation depending on the privileges of the configured service account.

calero

Calero VeraSMART versions prior to 2022 R1 expose an unauthenticated .NET Remoting HTTP service on TCP port 8001. The service publishes default ObjectURIs (including EndeavorServer.rem and RemoteFileReceiver.rem) and permits the use of SOAP and binary formatters with TypeFilterLevel set to Full. An unauthenticated remote attacker can invoke the exposed remoting endpoints to perform arbitrary file read and write operations via the WebClient class. This allows retrieval of sensitive files such as WebRoot\\web.config, which may disclose IIS machineKey validation and decryption keys. An attacker can use these keys to generate a malicious ASP.NET ViewState payload and achieve remote code execution within the IIS application context. Additionally, supplying a UNC path can trigger outbound SMB authentication from the service account, potentially exposing NTLMv2 hashes for relay or offline cracking.

calero

Thrive Smart Home 1.1 contains an SQL injection vulnerability in the checklogin.php endpoint that allows unauthenticated attackers to bypass authentication by manipulating the 'user' POST parameter. Attackers can inject malicious SQL code like ' or 1=1# to manipulate login queries and gain unauthorized access to the application.

Galaxy FDS Android SDK (XiaoMi/galaxy-fds-sdk-android) version 3.0.8 and prior disable TLS hostname verification when HTTPS is enabled (the default configuration). In GalaxyFDSClientImpl.createHttpClient(), the SDK configures Apache HttpClient with SSLSocketFactory.ALLOW_ALL_HOSTNAME_VERIFIER, which accepts any valid TLS certificate regardless of hostname mismatch. Because HTTPS is enabled by default in FDSClientConfiguration, all applications using the SDK with default settings are affected. This vulnerability allows a man-in-the-middle attacker to intercept and modify SDK communications to Xiaomi FDS cloud storage endpoints, potentially exposing authentication credentials, file contents, and API responses. The XiaoMi/galaxy-fds-sdk-android open source project has reached end-of-life status.

Unrestricted Upload of File with Dangerous Type vulnerability in NTN Information Processing Services Computer Software Hardware Industry and Trade Ltd. Co. Smart Panel allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Smart Panel: before 20251215.

JUNG Smart Visu Server 1.1.1050 contains a denial of service vulnerability that allows unauthenticated attackers to remotely shutdown or reboot the server. Attackers can send a single POST request to trigger the server reboot without requiring any authentication.

jung-group