Incus is a system container and virtual machine manager. In versions before 7.0.0, broken TLS validation logic in the OVN database connection logic can allow connections to an attacker's OVN database. The OVN client implementations disable Go standard TLS server verification and replace it with custom peer-certificate verification logic. That replacement verifier does not anchor trust in the configured CA certificate. Instead, it constructs the verification root set from certificates supplied by the peer during the handshake, so the configured CA is parsed but not used as the trust anchor for the final verification decision. In OVN-enabled deployments that use these SSL database connection paths, an attacker able to impersonate or intercept the OVN endpoint on the management network can present a rogue self-signed certificate chain, and Incus will accept this certificate as valid. This issue defeats the intended CA-based trust model for OVN database connections and permits endpoint impersonation by an active attacker in a suitable network position. This issue is fixed in version 7.0.0.

linuxcontainers

OpenClaw before 2026.4.10 contains a server-side request forgery vulnerability in browser navigation policy that allows attackers to bypass hostname validation through DNS rebinding attacks. Attackers can exploit inconsistent hostname resolution between validation and actual network requests to pivot to internal resources via unallowlisted hostname URLs.

openclaw

OpenClaw before 2026.4.10 contains an improper network binding vulnerability in the sandbox browser CDP relay that exposes Chrome DevTools Protocol on 0.0.0.0. Attackers can access the DevTools protocol outside intended local sandbox boundaries by exploiting the overly broad binding configuration.

openclaw

OpenClaw before 2026.4.10 contains an incomplete navigation guard vulnerability that allows attackers to trigger navigation without complete SSRF policy enforcement. Browser press/type style interactions, including pressKey and type submit flows, can bypass post-action security checks to execute unauthorized navigation.

openclaw

OpenClaw before 2026.4.9 contains a file read vulnerability allowing attackers to bypass navigation guards through browser act/evaluate interactions. Attackers can pivot into the local CDP origin and create or read disallowed file:// pages despite direct navigation policy restrictions.

openclaw

OpenClaw versions 2026.2.21 before 2026.4.10 contain an authentication bypass vulnerability in the sandbox noVNC helper route that exposes interactive browser session credentials. Attackers can access the noVNC helper route without bridge authentication to gain unauthorized access to the interactive browser session.

openclaw

Masa CMS is a content management system forked from Mura CMS. In versions 7.5.2 and earlier, the `cTrash.restore` function does not properly validate anti-CSRF tokens for content restoration requests. An attacker can trick a logged-in administrator to submit a forged request that restores deleted items from the trash and places them at an attacker-controlled location in the site structure through the parentid parameter. This can restore previously deleted malicious or outdated content, expose sensitive documents by moving them into publicly accessible locations, and disrupt site structure or content integrity. This issue has been fixed in versions 7.2.10, 7.3.15, 7.4.10, and 7.5.3. As a workaround, restrict access to the administrative backend, use browser isolation for administrative sessions, and regularly empty the trash to reduce the amount of content available for unauthorized restoration.

Masa CMS is a content management system forked from Mura CMS. In versions 7.5.2 and earlier, the cTrash.empty function does not validate anti-CSRF tokens for trash management requests. An attacker can induce a logged-in administrator to submit a forged request that empties the trash and permanently deletes all deleted content. This can cause irreversible data loss and disrupt recovery of content intended for restoration. This issue has been fixed in versions 7.2.10, 7.3.15, 7.4.10, and 7.5.3. As a workaround, restrict access to the administrative backend, use browser isolation for administrative sessions, and maintain current database backups to recover from unauthorized deletion.

Masa CMS is a content management system forked from Mura CMS. In versions 7.5.2 and earlier, the cUsers.updateAddress function does not properly validate anti-CSRF tokens for user address management operations. An attacker can induce a logged-in administrator to submit a forged request that adds, modifies, or deletes user address records, including email addresses and phone numbers. This can be used to alter contact information, redirect organizational communications, and corrupt address data in the user directory. This issue has been fixed in versions 7.2.10, 7.3.15, 7.4.10, and 7.5.3. As a workaround, restrict access to the administrative backend, use browser isolation for administrative sessions, or deploy filtering rules to block forged requests to the affected endpoint

HCL BigFix Service Management (SX) is affected by a Broken Access Control vulnerability leading to privilege escalation. This could allow unauthorized users to gain elevated privileges, bypassing intended access restrictions. This may result in exposure of sensitive data or unauthorized system modifications

hcltech

A vulnerability in the Lite Agent feature of Cisco Enterprise Chat and Email (ECE) could allow an authenticated, remote attacker to conduct browser-based attacks. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Agent. This vulnerability is due to inadequate validation of file contents during file upload operations. An attacker could exploit this vulnerability by uploading a file that contains malicious scripts or HTML code, which the application could make available to other users to access. A successful exploit could allow the attacker to execute the contents of that file in the browser of a user and conduct browser-based attacks. 

HCL BigFix Service Management (SM) is affected by a security misconfiguration due to a missing or insecure “X-Content-Type-Options” header. This could allow browsers to perform MIME-type sniffing, potentially causing malicious content to be interpreted and executed incorrectly.

hcltech

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe.

linux

In the Linux kernel, the following vulnerability has been resolved: tracing: ring-buffer: Fix to check event length before using Check the event length before adding it for accessing next index in rb_read_data_buffer(). Since this function is used for validating possibly broken ring buffers, the length of the event could be broken. In that case, the new event (e + len) can point a wrong address. To avoid invalid memory access at boot, check whether the length of each event is in the possible range before using it.

linux

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...

linux

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

linux

In the Linux kernel, the following vulnerability has been resolved: xfrm: always flush state and policy upon NETDEV_UNREGISTER event syzbot is reporting that "struct xfrm_state" refcount is leaking. unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2 ref_tracker: netdev@ffff888052f24618 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_tracker_alloc include/linux/netdevice.h:4412 [inline] xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316 xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline] xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022 xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550 xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646 __sys_sendmsg+0x16d/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") implemented xfrm_dev_unregister() as no-op despite xfrm_dev_state_add() from xfrm_state_construct() acquires a reference to "struct net_device". I guess that that commit expected that NETDEV_DOWN event is fired before NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add() is called only if (dev->features & NETIF_F_HW_ESP) != 0. Sabrina Dubroca identified steps to reproduce the same symptoms as below. echo 0 > /sys/bus/netdevsim/new_device dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/) ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \ spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \ offload crypto dev $dev dir out ethtool -K $dev esp-hw-offload off echo 0 > /sys/bus/netdevsim/del_device Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after xfrm_dev_state_add() acquired a reference to "struct net_device". Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit when acquiring a reference to "struct net_device". Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device") re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that commit for unknown reason chose to share xfrm_dev_down() between the NETDEV_DOWN event and the NETDEV_UNREGISTER event. I guess that that commit missed the behavior in the previous paragraph. Therefore, we need to re-introduce xfrm_dev_unregister() in order to release the reference to "struct net_device" by unconditionally flushing state and policy.

linux

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix NULL pointer dereference If there's a mismatch between the DAI links in the machine driver and the topology, it is possible that the playback/capture widget is not set, especially in the case of loopback capture for echo reference where we use the dummy DAI link. Return the error when the widget is not set to avoid a null pointer dereference like below when the topology is broken. RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]

linux

HCL DFXAnalytics is affected by an Insecure Security Header Configuration vulnerability where the application utilizes the outdated X-XSS-Protection header, which could allow an attacker to exploit browser-specific rendering flaws or bypass security controls that should instead be managed by a robust Content Security Policy (CSP).

hcltech

The LatePoint plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to and including 5.5.0. This is due to insufficient input sanitization on the customer cabinet profile update endpoint — where raw POST parameters (first_name, last_name, phone, notes) bypass sanitization because OsCustomerModel does not override params_to_sanitize(), causing set_data() to store unsanitized values verbatim in the database — combined with insufficient output escaping in generate_preview(), which injects those stored values into notification template HTML via str_replace() without any esc_html() call before echoing the result. This makes it possible for authenticated attackers with customer-level access or above to inject arbitrary web scripts into the admin notification preview panel that execute in an administrator's or agent's browser whenever a notification template referencing customer variables such as {{customer_full_name}}, {{customer_first_name}}, {{customer_last_name}}, {{customer_phone}}, or {{customer_notes}} is previewed.

ERPNext v15.103.1 and before is vulnerable to Cross Site Scripting (XSS) in the Email Template engine. An attacker with permission to create or edit email templates can inject malicious JavaScript code that are executed on the victim's browser when the template is applied.

frappe

In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register ID for BPF_END value tracking When a register undergoes a BPF_END (byte swap) operation, its scalar value is mutated in-place. If this register previously shared a scalar ID with another register (e.g., after an `r1 = r0` assignment), this tie must be broken. Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END. Consequently, if a conditional jump checks the swapped register, the verifier incorrectly propagates the learned bounds to the linked register, leading to false confidence in the linked register's value and potentially allowing out-of-bounds memory accesses. Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case to break the scalar tie, similar to how BPF_NEG handles it via `__mark_reg_known`.

linux