The Taskbuilder – Project Management & Task Management Tool With Kanban Board plugin for WordPress is vulnerable to SQL Injection via the 'wppm_proj_filter' parameter in versions up to, and including, 5.0.9. This is due to insufficient escaping on the user-supplied parameter and the lack of sufficient preparation on the existing SQL query — the value is re-read at line 144 using only sanitize_text_field() (overwriting the earlier absint() result), then concatenated into the SQL WHERE clause as an unquoted numeric operand using only esc_sql(), which does not protect against injection in that context, and finally string-interpolated into the $wpdb->prepare() format string, bypassing parameterization entirely. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The vulnerability involves an Insecure Direct Object Reference (IDOR) in the `DeleteNotificationController::delete()` method at endpoint `GET /notification/delete/{id}`. The flaw allows any authenticated user, regardless of company or permissions, to delete notifications belonging to any other user in the system. The controller retrieves the target record with `Notification::findOrFail($id)` and deletes it without validating `user_id` or `company_id` ownership, unlike the sibling `SetNotificationReadAjaxController`, which correctly scopes lookups by `Auth::id()`. Because notification identifiers are sequential, an attacker can iterate over IDs to systematically delete notifications belonging to any user, denying them visibility of ticket alerts, task assignments, and other system events.

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment() br_ip6_fragment() gets prevhdr, a pointer into the skb head, from ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb skb_checksum_help() reallocates the head via pskb_expand_head(), leaving prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a use-after-free write. Save prevhdr's offset before skb_checksum_help() and recompute it after, like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6 fragment"). BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857) Write of size 1 at addr ffff888013ff5016 by task exploit/141 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip6_frag_next (net/ipv6/ip6_output.c:857) br_ip6_fragment (net/ipv6/netfilter.c:212) nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407) nf_hook_slow (net/netfilter/core.c:619) br_forward_finish (net/bridge/br_forward.c:66) __br_forward (net/bridge/br_forward.c:115) maybe_deliver (net/bridge/br_forward.c:191) br_flood (net/bridge/br_forward.c:245) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:442) ... packet_sendmsg (net/packet/af_packet.c:3114) ... do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header.

In the Linux kernel, the following vulnerability has been resolved: net: usb: net1080: validate packet_len before pad-byte access in rx_fixup For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading.

In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740)

In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free of the discoverer in tipc_disc_rcv() bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(), but tipc_disc_rcv() still dereferences b->disc in RX softirq under rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv). L2 bearers are safe thanks to the synchronize_net() in tipc_disable_l2_media(), but the UDP bearer defers that call to the cleanup_bearer() workqueue, so the discoverer is freed with no grace period: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 <IRQ> tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) </IRQ> Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001) The bearer is freed with kfree_rcu(); free the discoverer the same way. Add an rcu_head to struct tipc_discoverer and free it and its skb from an RCU callback. Because the RCU callback (tipc_disc_free_rcu) lives in module text, a call_rcu() that is still pending when the tipc module is unloaded would invoke a freed function. Add an rcu_barrier() to tipc_exit() after the bearer subsystem has been torn down, so all pending discoverer callbacks have run before the module text goes away. Reachable from an unprivileged user namespace: the TIPCv2 genl family is netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC and CONFIG_TIPC_MEDIA_UDP.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket smc_cdc_rx_handler() looks up the connection by token under the link group's conns_lock, drops the lock, and then dereferences conn and the smc_sock derived from it, ending in sock_hold(&smc->sk) inside smc_cdc_msg_recv(). No reference is held across the lock release. The only reference pinning the socket while the connection is discoverable in the link group is taken in smc_lgr_register_conn() (sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both under conns_lock. Once the handler drops conns_lock, a concurrent close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn() can drop that reference and free the smc_sock, so the handler's later sock_hold() runs on freed memory: WARNING: lib/refcount.c:25 at refcount_warn_saturate Workqueue: rxe_wq do_work refcount_warn_saturate (lib/refcount.c:25) smc_cdc_msg_recv (net/smc/smc_cdc.c:430) smc_cdc_rx_handler (net/smc/smc_cdc.c:502) smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445) tasklet_action_common (kernel/softirq.c:938) handle_softirqs (kernel/softirq.c:622) Kernel panic - not syncing: panic_on_warn set Only SMC-R is affected. The SMC-D receive tasklet is stopped by tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection is unregistered, so it cannot run concurrently with the free. Take the socket reference while still holding conns_lock, so the registration reference can no longer be the last one, and drop it once the handler is done.

In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup() genelink_rx_fixup() splits an aggregated RX frame into its individual packets, using a per-packet length taken from device-supplied data. That length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared against how many bytes were actually received. A malicious GeneLink (GL620A) device can therefore send a short URB whose header claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size); then copies past the end of the receive buffer and hands the adjacent slab contents up the network stack, an out-of-bounds read that leaks kernel heap. No privilege is required: the path runs in the usbnet RX softirq as soon as the interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... skb_pull() already verifies that the requested length fits the buffer and returns NULL otherwise. Move it ahead of the copy and check its result, so a packet that overruns the received data is rejected before it is read. Well-formed frames, whose packets are fully present, are unaffected.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD eir_create_adv_data() builds the advertising data into a fixed-size buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags" AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies the per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len); tlv_data_max_len() only reserves those 3 bytes when the user-supplied flags carry a managed-flags bit, so an instance added with flags == 0 is accepted with adv_data_len up to the full buffer. At advertise time the flags are still prepended, and the memcpy() writes 3 + adv_data_len bytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp' The "Flags" structure is added by the kernel, not requested by userspace, so only prepend it when it fits together with the instance advertising data; when there is no room for both, drop the flags rather than the user-provided data. Reachable by a local user with CAP_NET_ADMIN owning an LE-only controller on the legacy advertising path.

In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code. As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target. An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral. The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.

A flaw was found in the file-icns plugin in GIMP. When applying a decompressed mask during ICNS image processing, the plugin reads from the mask data buffer without verifying if the cursor exceeds the allocated resource size. If a crafted file contains a truncated mask resource, the icns_decompress function continues reading past the bounds of the buffer. This out-of-bounds read vulnerability results in information disclosure of heap contents, where memory contents are leaked as alpha channel pixel values, or a crash leading to a denial of service if unmapped memory is accessed.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject oversized nested action attrs Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).

In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: lpc32xx: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ lpc32xx_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq().

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: free scan_mask on buffer release The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer: hw-consumer: remove redundant scan_mask flexible array"). Before that change, the scan mask storage was embedded in struct hw_consumer_buffer, so iio_hw_buf_release() could free the whole allocation with a single kfree(hw_buf). That commit moved the scan mask to a separate bitmap_zalloc() allocation stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged. Free the scan mask in iio_hw_buf_release() before freeing the buffer wrapper.

In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback.

In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths.