A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory available to bbe-smgd has been consumed, no new subscribers will be able to login. The memory utilization of bbe-smgd can be monitored with the following show command: user@host> show system processes extensive | match bbe-smgd The below log message can be observed when this limit has been reached: bbesmgd[<PID>]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion This issue affects Junos OS on MX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R2.

juniper

An issue was discovered in L2 in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, 2500, 9110, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. Incorrect handling of LTE MAC packets containing many MAC Control Elements (CEs) leads to baseband crashes.

samsung

A vulnerability was found in Belkin F9K1015 1.00.10. This affects the function formCrossBandSwitch of the file /goform/formCrossBandSwitch. Performing a manipulation of the argument webpage results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

belkin

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations ieee80211_chan_bw_change() iterates all stations and accesses link->reserved.oper via sta->sdata->link[link_id]. For stations on AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to the VLAN sdata, whose link never participates in chanctx reservations. This leaves link->reserved.oper zero-initialized with chan == NULL, causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw() when accessing chandef->chan->band during CSA. Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata() before accessing link data. [also change sta->sdata in ARRAY_SIZE even if it doesn't matter]

linux

In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix null pointer dereference when restoring bandwidth counters When an MSC supporting memory bandwidth monitoring is brought offline and then online, mpam_restore_mbwu_state() calls __ris_msmon_read() via ipi to restore the configuration of the bandwidth counters. It doesn't care about the value read, mbwu_arg.val, and doesn't set it leading to a null pointer dereference when __ris_msmon_read() adds to it. This results in a kernel oops with a call trace such as: Call trace: __ris_msmon_read+0x19c/0x64c (P) mpam_restore_mbwu_state+0xa0/0xe8 smp_call_on_cpu_callback+0x1c/0x38 process_one_work+0x154/0x4b4 worker_thread+0x188/0x310 kthread+0x11c/0x130 ret_from_fork+0x10/0x20 Provide a local variable for val to avoid __ris_msmon_read() dereferencing a null pointer when adding to val.

linux

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.get_byte_ranges parses the HTTP Range header without limiting the number of individual byte ranges. Although the existing fix for CVE-2024-26141 rejects ranges whose total byte coverage exceeds the file size, it does not restrict the count of ranges. An attacker can supply many small overlapping ranges such as 0-0,0-0,0-0,... to trigger disproportionate CPU, memory, I/O, and bandwidth consumption per request. This results in a denial of service condition in Rack file-serving paths that process multipart byte range responses. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

rack

A security flaw has been discovered in Belkin F9K1122 1.00.33. The affected element is the function formCrossBandSwitch of the file /goform/formCrossBandSwitch of the component Parameter Handler. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

belkin

Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, a remote user can trigger a Denial of Service (DoS) against a Netty HTTP/2 server by sending a flood of `CONTINUATION` frames. The server's lack of a limit on the number of `CONTINUATION` frames, combined with a bypass of existing size-based mitigations using zero-byte frames, allows an user to cause excessive CPU consumption with minimal bandwidth, rendering the server unresponsive. Versions 4.1.132.Final and 4.2.10.Final fix the issue.

netty

HCL Aftermarket DPC is affected by Spamming Vulnerability which can allow the actor to excessive spamming can consume server bandwidth and processing resources which may lead to Denial of Service.

hcltech

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

linuxfoundation

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in VillaTheme Abandoned Cart Recovery for WooCommerce woo-abandoned-cart-recovery allows Stored XSS.This issue affects Abandoned Cart Recovery for WooCommerce: from n/a through <= 1.1.10.

In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation.

linux

A vulnerability was detected in Tenda AC21 16.03.08.16. Impacted is the function formSetQosBand of the file /goform/SetNetControlList. Performing a manipulation of the argument list results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

tenda

A vulnerability was found in Tenda A18 Pro 02.03.02.28. The affected element is the function set_qosMib_list of the file /goform/formSetQosBand. Performing a manipulation of the argument list results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.0.0.2, users with the `Notes - my encounters` role can fill Eye Exam forms in patient encounters. The answers to the form can be printed out in PDF form. An Out-of-Band Server-Side Request Forgery (OOB SSRF) vulnerability was identified in the PDF creation function where the form answers are parsed as unescaped HTML, allowing an attacker to forge requests from the server made to external or internal resources. Version 8.0.0.2 fixes the issue.

open-emr

Heap-based buffer overflow in Windows Mobile Broadband allows an unauthorized attacker to execute code with a physical attack.

microsoft

Dell Command | Intel vPro Out of Band, versions prior to 4.7.0, contain an Uncontrolled Search Path Element vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.

dell

A vulnerability has been found in libvips 8.19.0. This issue affects the function vips_extract_band_build of the file libvips/conversion/extract.c. The manipulation of the argument extract_band leads to out-of-bounds read. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is 24795bb3d19d84f7b6f5ed86451ad556c8f2fe70. To fix this issue, it is recommended to deploy a patch.

libvips

A flaw has been found in libvips 8.19.0. This vulnerability affects the function vips_unpremultiply_build of the file libvips/conversion/unpremultiply.c. Executing a manipulation of the argument alpha_band can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been published and may be used. This patch is called 7215ead1e0cd7d3703cc4f5fca06d7d0f4c22b91. A patch should be applied to remediate this issue.

libvips

A vulnerability was detected in libvips 8.19.0. This affects the function vips_bandrank_build of the file libvips/conversion/bandrank.c. Performing a manipulation of the argument index results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit is now public and may be used. The patch is named fd28c5463697712cb0ab116a2c55e4f4d92c4088. It is suggested to install a patch to address this issue.

libvips

OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the session expiration check in `library/auth.inc.php` runs only when `skip_timeout_reset` is not present in the request. When `skip_timeout_reset=1` is sent, the entire block that calls `SessionTracker::isSessionExpired()` and forces logout on timeout is skipped. As a result, any request that includes this parameter (e.g. from auto-refresh pages like the Patient Flow Board) never runs the expiration check: expired sessions can continue to access data indefinitely, abandoned workstations stay active, and an attacker with a stolen session cookie can keep sending `skip_timeout_reset=1` to avoid being logged out. Version 8.0.0 fixes the issue.

open-emr

A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop. This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device. Note:&nbsp;To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider.&nbsp;