A Server-Side Request Forgery (SSRF) bypass vulnerability exists in “stunnel” 5.79 and lower when configured in SOCKS proxy mode. This flaw allows a client to bypass intended localhost restrictions by using IPv4-mapped IPv6 addresses (e.g., “::ffff:127.0.0.1”) or unspecified addresses ("0.0.0.0", "::"), enabling access to loopback-only services on the "stunnel" host that should not be network-reachable.

In Eclipse Milo versions 0.6.0 through 1.1.4, UASC server transport handlers fail to release retained partial message chunks when a channel disconnects, allowing a remote unauthenticated client to exhaust pooled direct memory by repeatedly sending incomplete chunks and disconnecting, potentially terminating the server.

eclipse

In Eclipse Milo versions 0.6.0 through 1.1.4, OPC UA server diagnostics nodes do not enforce access authorization. An anonymous client can enable diagnostics over a None/None endpoint without a certificate; with a trusted client application certificate over SignAndEncrypt, it can read security diagnostics for other active sessions, exposing usernames, login history, authentication mechanisms, security modes and policies, and public client certificates.

eclipse

In Eclipse Milo versions 1.0.0 through 1.1.4, the Call service dispatches the original mixed batch to address-space handlers after calculating authorization, allowing an anonymous or otherwise low-privileged client to execute a denied method by batching it with an allowed method.

eclipse

In Eclipse Milo versions 1.0.0 through 1.1.4, monitored-item quota accounting is not exception-safe: if item creation fails with an unchecked error, the server-global reservation is not restored. Deeply nested PubSub ExtensionObjects in a `CreateMonitoredItems` event filter can trigger a `StackOverflowError` during decoding, allowing an unauthenticated remote client to exhaust a finite global monitored-item quota and prevent all clients from creating new monitored items until restart. Existing monitored items and other server functions remain unaffected.

eclipse

In Eclipse Milo versions 0.6.0 through 1.1.4, username-token processing returns distinguishable errors for invalid RSA PKCS#1 v1.5 padding and other authentication failures, allowing an on-path attacker who captures a victim's `Basic128Rsa15`-encrypted username token to use repeated unauthenticated `ActivateSession` requests as a padding oracle, recover the victim's password, and authenticate with the recovered credentials.

eclipse

In Eclipse Milo versions 1.0.0 through 1.1.4, `OpcUaServerConfig.copy()` fails to preserve a configured `RoleMapper`. On servers that rely on role permissions and construct the running configuration through `copy()`, sessions receive no role IDs and the default access controller skips role-permission checks, allowing an anonymous client where anonymous sessions are permitted to read role-permission metadata, invoke protected methods, or delete protected nodes.

eclipse

External control of file name or path vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute pardus-image-writer allows Removing Important Client Functionality. This issue affects pardus-image-writer: before 1.0.4.

Improper Handling of Case Sensitivity vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.Authorize module) renders the user agent session binding inert, removing a defense in depth control against replay of a stolen session. This vulnerability is associated with program files lib/oidcc/plug/authorize.ex and lib/oidcc/plug/authorization_callback.ex, and program routines Oidcc.Plug.Authorize.call/2 and Oidcc.Plug.AuthorizationCallback.call/2. Oidcc.Plug.Authorize.call/2 reads the initiating client's user agent with get_req_header(conn, "User-Agent"). Plug lowercases incoming header names, but get_req_header/2 matches the supplied key exactly and performs no normalization of its own, so the mixed-case lookup always returns an empty list and nil is written into the session. On the callback side, Oidcc.Plug.AuthorizationCallback treats a stored nil user agent as nothing to compare and returns :ok without inspecting the request. The two behaviours combine so that the check passes unconditionally on every request, including for deployments that explicitly opted in with check_useragent: true, and an authorization callback can be completed from a different user agent than the one that initiated the flow without detection. The check fails open silently, with no error and no log entry, so a deployment cannot tell the binding is absent. The impact is limited to defense in depth. The inert check does not by itself allow an attacker to complete an authorization flow; it removes one layer that would otherwise hinder use of a stolen or leaked session, such as an exfiltrated session cookie replayed from a different client. The CSRF/state, nonce, and PKCE checks are unaffected and continue to function. Deployments that never enabled check_useragent are not affected in practice, since they never expected the binding. The corresponding lookup in Oidcc.Plug.AuthorizationCallback correctly uses the lowercase key and is not affected. This issue affects oidcc_plug: from 0.1.0-alpha.3 before 0.5.0.

In Eclipse Jetty, the Digest authentication server-side component uses ISO-8859-1 to encode the password as bytes. This was done because the initial specification for HTTP did not specify explicitly a charset, and it was assumed to be ISO-8859-1 for historical reasons. If the password contains characters that cannot be represented in ISO-8859-1, they are silently replaced by `?`. This happens with passwords that contain Chinese, Cyrillic or Greek characters, for example: `αβ123` converts to `??123`. An attacker can send a request with a digest `Authorization` header crafted with a password made of only `?` characters; the server would match any password of the same length that contains non-ISO-8859-1 characters. Recent HTTP Digest [RFC-7616](https://datatracker.ietf.org/doc/html/rfc7616) supports a `charset` parameters that defaults to UTF-8 that allows for correct encoding/decoding of passwords.

A flaw was found in SSSD. The sss_nss_protocol_fill_initgr() function in the NSS responder pre-allocates reply space for all group entries but does not shrink the packet when groups are skipped, causing uninitialized heap bytes to be transmitted to the client. A local attacker can exploit this to disclose cached directory data and heap layout information from the sssd_nss process.

A code injection vulnerability exists in the LINE Android app prior to version 26.7.2. The profile rendering component does not adequately validate or sandbox externally supplied script content embedded in profile templates. As a result, an attacker who is able to place crafted content in a profile could cause unintended code to execute with the application's privileges when a victim views that profile. A server-side mitigation has been deployed that also protects existing Android clients that have not been updated to version 26.7.2.

A path traversal vulnerability in the CLI command used to execute configuration files in Zyxel ATP series firmware versions from V4.32 through V5.42 Patch 1, USG FLEX series firmware versions from V4.50 through V5.42 Patch 1, USG FLEX 50(W) series firmware versions from V4.16 through V5.42 Patch 1, and USG20(W)-VPN series firmware versions from V4.16 through V5.42 Patch 1 could allow an authenticated attacker with administrator privileges to execute a crafted malicious configuration file on an affected device.

A flaw in Node.js HTTP client can cause a request desynchronization for Node.js-based forwarding proxies that rebuild outbound headers from the visible `IncomingMessage` headers while piping the original body to a reused backend connection. Node.js can omit headers beyond `maxHeadersCount` / `maxHeaderPairs` from `req.headers`, `req.rawHeaders`, and `req.headersDistinct`, while still using those omitted headers internally for HTTP message framing. In particular, `Content-Length` can be hidden from userland while the request body is still delivered. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

Misskey is an open source, federated social media platform. IVersions 8.63.0 and later, but prior to 2026.5.4, contain a vulnerability that can cause the Misskey web client to slow down or crash when it applies a malformed theme. This issue has been fixed in version 2026.5.4.

The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787). The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write. The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation.

Guzzle is an extensible PHP HTTP client. Prior to 7.15.2 and 8.0.1, Guzzle gives a transport the request URI as text and supplies the Host header separately. The cURL handlers set CURLOPT_URL to the URI exactly as written and push that Host into CURLOPT_HTTPHEADER; StreamHandler does the same through fopen(). libcurl then parses the authority itself, percent-decoding it and, on an IDN-capable build, applying IDNA mapping, and uses the result to resolve, connect, name the TLS peer and address a proxy CONNECT, while the supplied Host suppresses the aligned one libcurl would have generated. For a URI host written as 127.0.0.%31, filter_var() rejects the host as an IP literal, yet libcurl decodes it to 127.0.0.1 and reaches loopback with no DNS lookup while the server receives Host: 127.0.0.%31. An attacker who influences a fetched URI can therefore reach a host the application's checks excluded and read whatever the host exposes of the response. The same divergence moves Guzzle's own decisions onto a spelling the transport does not use: no_proxy selects proxy routing from the literal host, and RedirectMiddleware decides from it whether to strip Authorization and Cookie. Exploitation requires the application to build a request URI from untrusted input and to make a host decision before handing it to Guzzle. This issue is fixed in versions 7.15.2 and 8.0.1.

Guzzle is an extensible PHP HTTP client. Prior to 7.15.2 and 8.0.1, SetCookie::matchesDomain() gives every subdomain of a cookie Domain that cookie unless SetCookie::matchesDomain() recognizes the Domain as an IP literal or a numeric host, and the decision comes from the domain's own text, so two spellings a transport reads as an address keep subdomain scope. Hexadecimal and mixed-base forms such as 0x7f000001 and 0177.0.0.0x1 go unrecognized while libcurl 8.21.0 reads both as 127.0.0.1. A percent-escaped Domain keeps that scope on both branches because percent-decoding sits above numeric parsing, so 192.168.0.%31 and 127.0.0.1%2e are registered names in the URI grammar rather than address literals, and no numeric rule in any base classifies them, while libcurl decodes the host before resolving and reads them as 192.168.0.1 and 127.0.0.1. A cookie stored for Domain=0x7f000001 is placed in the Cookie header of a request to evil.0x7f000001, disclosing a session identifier or token to a host that is not that address, and a response from evil.0x7f000001 setting Domain=0x7f000001 is accepted into the jar and replayed to the address, so a server answering for the look-alike name can fix a session or set application state. Exploitation requires the application to enable cookie support, address an origin by one of these spellings, and contact a host whose name ends in that spelling. This issue is fixed in versions 7.15.2 and 8.0.1.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.3, an out-of-bounds heap read could occur in the C response parser while building an error message for a malformed response. An attacker controlled server, or possibly an accidental response, could trigger a DoS in the client. The vulnerable path was error message construction in aiohttp/_http_parser.pyx, where an llhttp error-position pointer was used to build a snippet for malformed chunked responses and malformed request or response bytes at the buffer end. This issue is fixed in version 3.14.3.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.2, the HTTP parsers were vulnerable to a request smuggling attack relating to WebSocket upgrades. If using the server-side component, an attacker may be able to execute a request smuggling vulnerability using an edge case in the WebSocket upgrade procedure. A WebSocket upgrade request with a body could cause the parser to switch protocols before the complete request body was received, leaving trailing bytes to be handled as upgraded-protocol or pipelined data rather than normal HTTP body data. This issue is fixed in version 3.14.2.

Chisel is a TCP/UDP tunnel, transported over HTTP and secured via SSH. In versions prior to 1.11.5, authenticated clients can bypass --authfile ACL restrictions and tunnel traffic to arbitrary destinations reachable from the server. The ACL is enforced only during the initial handshake against declared remotes, but never on subsequent SSH channels that carry actual traffic. A malicious client can authenticate with a permitted remote, then open channels to any host:port it wants. This issue has been fixed in version 1.11.5.

Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. In versions prior to 2.22.0, an attacker can bypass the allowed hosts validation by omitting the Host header and supplying an X-Forwarded-Host header set to a whitelisted domain. The AllowedHostsMiddleware trusts the X-Forwarded-Host header as a fallback when the Host header is absent. Since X-Forwarded-Host is a client-controllable header, this enables host header injection attacks such as password reset poisoning, cache poisoning, and server-side request routing manipulation. Any application using AllowedHostsConfig is affected when deployed without a reverse proxy that strips X-Forwarded-Host, or when accepting HTTP/1.0 connections. This issue has been fixed in version 2.22.0.