In the Linux kernel, the following vulnerability has been resolved: iomap: fix invalid folio access when i_blkbits differs from I/O granularity Commit aa35dd5cbc06 ("iomap: fix invalid folio access after folio_end_read()") partially addressed invalid folio access for folios without an ifs attached, but it did not handle the case where 1 << inode->i_blkbits matches the folio size but is different from the granularity used for the IO, which means IO can be submitted for less than the full folio for the !ifs case. In this case, the condition: if (*bytes_submitted == folio_len) ctx->cur_folio = NULL; in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and iomap_read_end() will still be called on the folio even though the IO helper owns it and will finish the read on it. Fix this by unconditionally invalidating ctx->cur_folio for the !ifs case.

linux

In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock().

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption.

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.

linux

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators When a process crashes and the kernel writes a core dump to a 9P filesystem, __kernel_write() creates an ITER_KVEC iterator. This iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types, hitting the BUG() for any other type. Fix this by adding netfs_limit_kvec() following the same pattern as netfs_limit_bvec(), since both kvec and bvec are simple segment arrays with pointer and length fields. Dispatch it from netfs_limit_iter() when the iterator type is ITER_KVEC.

linux

Cross-Site Request Forgery (CSRF) vulnerability in ThemeGoods Grand Portfolio grandportfolio allows Cross Site Request Forgery.This issue affects Grand Portfolio: from n/a through <= 3.3.

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd() move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge zero pages. For the huge zero page path, src_folio is explicitly set to NULL, and is used as a sentinel to skip folio operations like lock and rmap. In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL, pgprot) passes NULL through folio_pfn() and page_to_pfn(). With SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD pointing to non-existent physical memory. On other memory models it is a NULL dereference. Use page_folio(src_page) to obtain the valid huge zero folio from the page, which was obtained from pmd_page() and remains valid throughout. After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge zero folio special"), moved huge zero PMDs must remain special so vm_normal_page_pmd() continues to treat them as special mappings. move_pages_huge_pmd() currently reconstructs the destination PMD in the huge zero page branch, which drops PMD state such as pmd_special() on architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result, vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page and corrupt its refcount. Instead of reconstructing the PMD from the folio, derive the destination entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD metadata the same way move_huge_pmd() does for moved entries by marking it soft-dirty and clearing uffd-wp.

linux

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix incorrect pte restoration for lazyfree folios We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the batch has a mix of writable and non-writable bits, we may end up setting the entire batch writable. Fix this by respecting writable bit during batching. Although on a successful unmap of a lazyfree folio, the soft-dirty bit is lost, preserve it on pte restoration by respecting the bit during batching, to make the fix consistent w.r.t both writable bit and soft-dirty bit. I was able to write the below reproducer and crash the kernel. Explanation of reproducer (set 64K mTHP to always): Fault in a 64K large folio. Split the VMA at mid-point with MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do MADV_FREE on the range to mark the folio as lazyfree. Write to the memory to dirty the pte, eventually rmap will dirty the folio. Then trigger reclaim, we will hit the pte restoration path, and the kernel will crash with the trace given below. The BUG happens at: BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw); The code path is asking for anonymous page to be mapped writable into the pagetable. The BUG_ON() firing implies that such a writable page has been mapped into the pagetables of more than one process, which breaks anonymous memory/CoW semantics. [ 21.134473] kernel BUG at mm/page_table_check.c:118! [ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 21.135917] Modules linked in: [ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT [ 21.136858] Hardware name: linux,dummy-virt (DT) [ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 21.137308] pc : page_table_check_set+0x28c/0x2a8 [ 21.137607] lr : page_table_check_set+0x134/0x2a8 [ 21.137885] sp : ffff80008a3b3340 [ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000 [ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001 [ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30 [ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000 [ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff [ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020 [ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0 [ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff [ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002 [ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0 [ 21.141991] Call trace: [ 21.142093] page_table_check_set+0x28c/0x2a8 (P) [ 21.142265] __page_table_check_ptes_set+0x144/0x1e8 [ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8 [ 21.142766] contpte_set_ptes+0xe8/0x140 [ 21.142907] try_to_unmap_one+0x10c4/0x10d0 [ 21.143177] rmap_walk_anon+0x100/0x250 [ 21.143315] try_to_unmap+0xa0/0xc8 [ 21.143441] shrink_folio_list+0x59c/0x18a8 [ 21.143759] shrink_lruvec+0x664/0xbf0 [ 21.144043] shrink_node+0x218/0x878 [ 21.144285] __node_reclaim.constprop.0+0x98/0x338 [ 21.144763] user_proactive_reclaim+0x2a4/0x340 [ 21.145056] reclaim_store+0x3c/0x60 [ 21.145216] dev_attr_store+0x20/0x40 [ 21.145585] sysfs_kf_write+0x84/0xa8 [ 21.145835] kernfs_fop_write_iter+0x130/0x1c8 [ 21.145994] vfs_write+0x2b8/0x368 [ 21.146119] ksys_write+0x70/0x110 [ 21.146240] __arm64_sys_write+0x24/0x38 [ 21.146380] invoke_syscall+0x50/0x120 [ 21.146513] el0_svc_common.constprop.0+0x48/0xf8 [ 21.146679] do_el0_svc+0x28/0x40 [ 21.146798] el0_svc+0x34/0x110 [ 21.146926] el0t ---truncated---

linux

Missing Authorization vulnerability in WP Folio Team PPWP password-protect-page allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PPWP: from n/a through <= 1.9.15.

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in nK Visual Portfolio, Photo Gallery & Post Grid visual-portfolio allows PHP Local File Inclusion.This issue affects Visual Portfolio, Photo Gallery & Post Grid: from n/a through <= 3.5.1.

In the Linux kernel, the following vulnerability has been resolved: mm: thp: deny THP for files on anonymous inodes file_thp_enabled() incorrectly allows THP for files on anonymous inodes (e.g. guest_memfd and secretmem). These files are created via alloc_file_pseudo(), which does not call get_write_access() and leaves inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being true, they appear as read-only regular files when CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP collapse. Anonymous inodes can never pass the inode_is_open_for_write() check since their i_writecount is never incremented through the normal VFS open path. The right thing to do is to exclude them from THP eligibility altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real filesystem files (e.g. shared libraries), not for pseudo-filesystem inodes. For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create large folios in the page cache via the collapse path, but the guest_memfd fault handler does not support large folios. This triggers WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping(). For secretmem, collapse_file() tries to copy page contents through the direct map, but secretmem pages are removed from the direct map. This can result in a kernel crash: BUG: unable to handle page fault for address: ffff88810284d000 RIP: 0010:memcpy_orig+0x16/0x130 Call Trace: collapse_file hpage_collapse_scan_file madvise_collapse Secretmem is not affected by the crash on upstream as the memory failure recovery handles the failed copy gracefully, but it still triggers confusing false memory failure reports: Memory failure: 0x106d96f: recovery action for clean unevictable LRU page: Recovered Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all anonymous inode files.

linux

Deserialization of Untrusted Data vulnerability in BuddhaThemes ColorFolio - Freelance Designer WordPress Theme allows Object Injection.This issue affects ColorFolio - Freelance Designer WordPress Theme: from n/a through 1.3.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed.

linux

Missing Authorization vulnerability in vowelweb VW Portfolio vw-portfolio allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects VW Portfolio: from n/a through <= 1.3.3.

Missing Authorization vulnerability in raratheme Perfect Portfolio perfect-portfolio allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Perfect Portfolio: from n/a through <= 1.2.4.

NEXULEAN is a cybersecurity portfolio & service platform for an Ethical Hacker, AI Enthusiast, and Penetration Tester. Prior to 2.0.0, a security vulnerability was identified where Firebase and Web3Forms API keys were exposed. An attacker could use these keys to interact with backend services without authentication, potentially leading to unauthorized access to application resources and user data. This vulnerability is fixed in 2.0.0.

Ghostfolio is an open source wealth management software. Prior to version 2.244.0, by bypassing symbol validation, an attacker can execute arbitrary SQL commands via the getHistorical() method, potentially allowing them to read, modify, or delete sensitive financial data for all users in the database. This issue has been patched in version 2.244.0.

ghostfol

Ghostfolio is an open source wealth management software. Prior to version 2.245.0, an attacker can exploit the manual asset import feature to perform a full-read SSRF, allowing them to exfiltrate sensitive cloud metadata (IMDS) or probe internal network services. This issue has been patched in version 2.245.0.

ghostfol

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in designthemes DesignThemes Portfolio designthemes-portfolio allows Reflected XSS.This issue affects DesignThemes Portfolio: from n/a through <= 1.3.

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

linux

A security vulnerability has been detected in rymcu forest up to 0.0.5. Affected by this issue is the function XssUtils.replaceHtmlCode of the file src/main/java/com/rymcu/forest/util/XssUtils.java of the component Article Content/Comments/Portfolio. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

rymcu

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in SolverWp Portfolio Builder swp-portfolio allows PHP Local File Inclusion.This issue affects Portfolio Builder: from n/a through <= 1.2.5.