OpenFGA is an authorization/permission engine. IN OpenFGA v1.3.8 to v1.8.2 (Helm chart openfga-0.1.38 to openfga-0.2.19, docker v1.3.8 to v.1.8.2) are vulnerable to authorization bypass under the following conditions: 1. calling Check API or ListObjects with a model that uses [conditions](https://openfga.dev/docs/modeling/conditions), and 2. calling Check API or ListObjects API with [contextual tuples](https://openfga.dev/docs/concepts#what-are-contextual-tuples) that include conditions and 3. OpenFGA is configured with caching enabled (`OPENFGA_CHECK_QUERY_CACHE_ENABLED`). Users are advised to upgrade to v1.8.3. There are no known workarounds for this vulnerability.

openfga

Argo Helm is a collection of community maintained charts for `argoproj.github.io` projects. Prior to version 0.45.0, the `workflow-role`) lacks granularity in its privileges, giving permissions to `workflowtasksets` and `workflowartifactgctasks` to all workflow Pods, when only certain types of Pods created by the Controller require these privileges. The impact is minimal, as an attack could only affect status reporting for certain types of Pods and templates. Version 0.45.0 fixes the issue.

Argo Workflows Chart is used to set up argo and its needed dependencies through one command. Prior to 0.44.0, the workflow-role has excessive privileges, the worst being create pods/exec, which will allow kubectl exec into any Pod in the same namespace, i.e. arbitrary code execution within those Pods. If a user can be made to run a malicious template, their whole namespace can be compromised. This affects versions of the argo-workflows Chart that use appVersion: 3.4 and above, which no longer need these permissions for the only available Executor, Emissary. It could also affect users below 3.4 depending on their choice of Executor in those versions. This only affects the Helm Chart and not the upstream manifests. This vulnerability is fixed in 0.44.0.

In lunary-ai/lunary version 1.2.7, there is a lack of rate limiting on the forgot password page, leading to an email bombing vulnerability. Attackers can exploit this by automating forgot password requests to flood targeted user accounts with a high volume of password reset emails. This not only overwhelms the victim's mailbox, making it difficult to manage and locate legitimate emails, but also significantly impacts mail servers by consuming their resources. The increased load can cause performance degradation and, in severe cases, make the mail servers unresponsive or unavailable, disrupting email services for the entire organization.

lunary

The "soap_cgi.pyc" API handler allows the XML body of SOAP requests to contain references to external entities. This allows an unauthenticated attacker to read local files, perform server-side request forgery, and overwhelm the web server resources.

journyx

A flaw was found in the Openshift console. The /API/helm/verify endpoint is tasked to fetch and verify the installation of a Helm chart from a URI that is remote HTTP/HTTPS or local. Access to this endpoint is gated by the authHandlerWithUser() middleware function. Contrary to its name, this middleware function does not verify the validity of the user's credentials. As a result, unauthenticated users can access this endpoint.

redhat

Directus is a real-time API and App dashboard for managing SQL database content. A denial of service (DoS) attack by field duplication in GraphQL is a type of attack where an attacker exploits the flexibility of GraphQL to overwhelm a server by requesting the same field multiple times in a single query. This can cause the server to perform redundant computations and consume excessive resources, leading to a denial of service for legitimate users. Request to the endpoint /graphql are sent when visualizing graphs generated at a dashboard. By modifying the data sent and duplicating many times the fields a DoS attack is possible. This vulnerability is fixed in 10.12.0.

monospace

The source-controller is a Kubernetes operator, specialised in artifacts acquisition from external sources such as Git, OCI, Helm repositories and S3-compatible buckets. The source-controller implements the source.toolkit.fluxcd.io API and is a core component of the GitOps toolkit. Prior to version 1.2.5, when source-controller was configured to use an Azure SAS token when connecting to Azure Blob Storage, the token was logged along with the Azure URL when the controller encountered a connection error. An attacker with access to the source-controller logs could use the token to gain access to the Azure Blob Storage until the token expires. This vulnerability was fixed in source-controller v1.2.5. There is no workaround for this vulnerability except for using a different auth mechanism such as Azure Workload Identity.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All versions of ArgoCD starting from v2.4 have a bug where the ArgoCD repo-server component is vulnerable to a Denial-of-Service attack vector. Specifically, it's possible to crash the repo server component through an out of memory error by pointing it to a malicious Helm registry. The loadRepoIndex() function in the ArgoCD's helm package, does not limit the size nor time while fetching the data. It fetches it and creates a byte slice from the retrieved data in one go. If the registry is implemented to push data continuously, the repo server will keep allocating memory until it runs out of it. A patch for this vulnerability has been released in v2.10.3, v2.9.8, and v2.8.12.

argoproj

datahub-helm provides the Kubernetes Helm charts for deploying Datahub and its dependencies on a Kubernetes cluster. Starting in version 0.1.143 and prior to version 0.2.182, due to configuration issues in the helm chart, if there was a successful initial deployment during a limited window of time, personal access tokens were possibly created with a default secret key. Since the secret key is a static, publicly available value, someone could inspect the algorithm used to generate personal access tokens and generate their own for an instance. Deploying with Metadata Service Authentication enabled would have been difficult during window of releases. If someone circumvented the helm settings and manually set Metadata Service Authentication to be enabled using environment variables directly, this would skip over the autogeneration logic for the Kubernetes Secrets and DataHub GMS would default to the signing key specified statically in the application.yml. Most deployments probably did not attempt to circumvent the helm settings to enable Metadata Service Authentication during this time, so impact is most likely limited. Any deployments with Metadata Service Authentication enabled should ensure that their secret values are properly randomized. Version 0.2.182 contains a patch for this issue. As a workaround, one may reset the token signing key to be a random value, which will invalidate active personal access tokens.

datahub

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. "Local sync" is an Argo CD feature that allows developers to temporarily override an Application's manifests with locally-defined manifests. Use of the feature should generally be limited to highly-trusted users, since it allows the user to bypass any merge protections in git. An improper validation bug allows users who have `create` privileges but not `override` privileges to sync local manifests on app creation. All other restrictions, including AppProject restrictions are still enforced. The only restriction which is not enforced is that the manifests come from some approved git/Helm/OCI source. The bug was introduced in 1.2.0-rc1 when the local manifest sync feature was added. The bug has been patched in Argo CD versions 2.10.3, 2.9.8, and 2.8.12. Users are advised to upgrade. Users unable to upgrade may mitigate the risk of branch protection bypass by removing `applications, create` RBAC access. The only way to eliminate the issue without removing RBAC access is to upgrade to a patched version.

argoproj

Improper Authentication vulnerability in Apache Pulsar Proxy allows an attacker to connect to the /proxy-stats endpoint without authentication. The vulnerable endpoint exposes detailed statistics about live connections, along with the capability to modify the logging level of proxied connections without requiring proper authentication credentials. This issue affects Apache Pulsar versions from 2.6.0 to 2.10.5, from 2.11.0 to 2.11.2, from 3.0.0 to 3.0.1, and 3.1.0. The known risks include exposing sensitive information such as connected client IP and unauthorized logging level manipulation which could lead to a denial-of-service condition by significantly increasing the proxy's logging overhead. When deployed via the Apache Pulsar Helm chart within Kubernetes environments, the actual client IP might not be revealed through the load balancer's default behavior, which typically obscures the original source IP addresses when externalTrafficPolicy is being configured to "Cluster" by default. The /proxy-stats endpoint contains topic level statistics, however, in the default configuration, the topic level statistics aren't known to be exposed. 2.10 Pulsar Proxy users should upgrade to at least 2.10.6. 2.11 Pulsar Proxy users should upgrade to at least 2.11.3. 3.0 Pulsar Proxy users should upgrade to at least 3.0.2. 3.1 Pulsar Proxy users should upgrade to at least 3.1.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. Additionally, it's imperative to recognize that the Apache Pulsar Proxy is not intended for direct exposure to the internet. The architectural design of Pulsar Proxy assumes that it will operate within a secured network environment, safeguarded by appropriate perimeter defenses.

apache

An issue was discovered in Cloud Native Computing Foundation (CNCF) Helm through 3.13.3. It displays values of secrets when the --dry-run flag is used. This is a security concern in some use cases, such as a --dry-run call by a CI/CD tool. NOTE: the vendor's position is that this behavior was introduced intentionally, and cannot be removed without breaking backwards compatibility (some users may be relying on these values). Also, it is not the Helm Project's responsibility if a user decides to use --dry-run within a CI/CD environment whose output is visible to unauthorized persons.

helm

Helm is a package manager for Charts for Kubernetes. Versions prior to 3.14.2 contain an uninitialized variable vulnerability when Helm parses index and plugin yaml files missing expected content. When either an `index.yaml` file or a plugins `plugin.yaml` file were missing all metadata a panic would occur in Helm. In the Helm SDK, this is found when using the `LoadIndexFile` or `DownloadIndexFile` functions in the `repo` package or the `LoadDir` function in the `plugin` package. For the Helm client this impacts functions around adding a repository and all Helm functions if a malicious plugin is added as Helm inspects all known plugins on each invocation. This issue has been resolved in Helm v3.14.2. If a malicious plugin has been added which is causing all Helm client commands to panic, the malicious plugin can be manually removed from the filesystem. If using Helm SDK versions prior to 3.14.2, calls to affected functions can use `recover` to catch the panic.

helm

Helm is a tool for managing Charts. Charts are packages of pre-configured Kubernetes resources. When either the Helm client or SDK is used to save a chart whose name within the `Chart.yaml` file includes a relative path change, the chart would be saved outside its expected directory based on the changes in the relative path. The validation and linting did not detect the path changes in the name. This issue has been resolved in Helm v3.14.1. Users unable to upgrade should check all charts used by Helm for path changes in their name as found in the `Chart.yaml` file. This includes dependencies.

helm

DataHub is an open-source metadata platform. The HMAC signature for DataHub Frontend sessions was being signed using a SHA-1 HMAC with the frontend secret key. SHA1 with a 10 byte key can be brute forced using sufficient resources (i.e. state level actors with large computational capabilities). DataHub Frontend was utilizing the Play LegacyCookiesModule with default settings which utilizes a SHA1 HMAC for signing. This is compounded by using a shorter key length than recommended by default for the signing key for the randomized secret value. An authenticated attacker (or attacker who has otherwise obtained a session token) could crack the signing key for DataHub and obtain escalated privileges by generating a privileged session cookie. Due to key length being a part of the risk, deployments should update to the latest helm chart and rotate their session signing secret. All deployments using the default helm chart configurations for generating the Play secret key used for signing are affected by this vulnerability. Version 0.11.1 resolves this vulnerability. All users are advised to upgrade. There are no known workarounds for this vulnerability.

datahub_project

In Red Lion Europe mbCONNECT24 and mymbCONNECT24 and Helmholz myREX24 and myREX24.virtual up to and including 2.14.2 an improperly implemented access validation allows an authenticated, low privileged attacker to gain read access to limited, non-critical device information in his account he should not have access to.

helmholz · mbconnectline

Argo CD is a declarative continuous deployment framework for Kubernetes. In Argo CD versions prior to 2.3 (starting at least in v0.1.0, but likely in any version using Helm before 2.3), using a specifically-crafted Helm file could reference external Helm charts handled by the same repo-server to leak values, or files from the referenced Helm Chart. This was possible because Helm paths were predictable. The vulnerability worked by adding a Helm chart that referenced Helm resources from predictable paths. Because the paths of Helm charts were predictable and available on an instance of repo-server, it was possible to reference and then render the values and resources from other existing Helm charts regardless of permissions. While generally, secrets are not stored in these files, it was nevertheless possible to reference any values from these charts. This issue was fixed in Argo CD 2.3 and subsequent versions by randomizing Helm paths. User's still using Argo CD 2.3 or below are advised to update to a supported version. If this is not possible, disabling Helm chart rendering, or using an additional repo-server for each Helm chart would prevent possible exploitation.

argoproj

Argo CD is a declarative continuous deployment for Kubernetes. All versions of ArgoCD starting from v2.4 have a bug where the ArgoCD repo-server component is vulnerable to a Denial-of-Service attack vector. Specifically, the said component extracts a user-controlled tar.gz file without validating the size of its inner files. As a result, a malicious, low-privileged user can send a malicious tar.gz file that exploits this vulnerability to the repo-server, thereby harming the system's functionality and availability. Additionally, the repo-server is susceptible to another vulnerability due to the fact that it does not check the extracted file permissions before attempting to delete them. Consequently, an attacker can craft a malicious tar.gz archive in a way that prevents the deletion of its inner files when the manifest generation process is completed. A patch for this vulnerability has been released in versions 2.6.15, 2.7.14, and 2.8.3. Users are advised to upgrade. The only way to completely resolve the issue is to upgrade, however users unable to upgrade should configure RBAC (Role-Based Access Control) and provide access for configuring applications only to a limited number of administrators. These administrators should utilize trusted and verified Helm charts.

argoproj

A remote unprivileged attacker can sent multiple packages to the LMS5xx to disrupt its availability through a TCP SYN-based denial-of-service (DDoS) attack. By exploiting this vulnerability, an attacker can flood the targeted LMS5xx with a high volume of TCP SYN requests, overwhelming its resources and causing it to become unresponsive or unavailable for legitimate users.

sick

A vulnerability in Red Lion Europe mbNET/mbNET.rokey and Helmholz REX 200 and REX 250 devices with firmware lower 7.3.2 allows an authenticated remote attacker with high privileges to inject malicious HTML or JavaScript code (XSS).

helmholz · redlion

AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. In the packages `aws-cdk-lib` 2.0.0 until 2.80.0 and `@aws-cdk/aws-eks` 1.57.0 until 1.202.0, `eks.Cluster` and `eks.FargateCluster` constructs create two roles, `CreationRole` and `default MastersRole`, that have an overly permissive trust policy. The first, referred to as the `CreationRole`, is used by lambda handlers to create the cluster and deploy Kubernetes resources (e.g `KubernetesManifest`, `HelmChart`, ...) onto it. Users with CDK version higher or equal to 1.62.0 (including v2 users) may be affected. The second, referred to as the `default MastersRole`, is provisioned only if the `mastersRole` property isn't provided and has permissions to execute `kubectl` commands on the cluster. Users with CDK version higher or equal to 1.57.0 (including v2 users) may be affected. The issue has been fixed in `@aws-cdk/aws-eks` v1.202.0 and `aws-cdk-lib` v2.80.0. These versions no longer use the account root principal. Instead, they restrict the trust policy to the specific roles of lambda handlers that need it. There is no workaround available for CreationRole. To avoid creating the `default MastersRole`, use the `mastersRole` property to explicitly provide a role.

amazon

Exposure of Sensitive Information to an unauthorized actor vulnerability in MB Connect Lines mbCONNECT24, mymbCONNECT24 and Helmholz' myREX24 and myREX24.virtual in versions <=2.13.3 allow an authorized remote attacker with low privileges to view a limited amount of another accounts contact information.

mbconnectline