In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs In iommu_mmio_write() and iommu_capability_write(), the variables dbg_mmio_offset and dbg_cap_offset are declared as int. However, they are populated using kstrtou32_from_user(). If a user provides a sufficiently large value, it can become a negative integer. Prior to this patch, the AMD IOMMU debugfs implementation was already protected by different mechanisms. 1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so e.g. 0xffffffff isn't a valid input. if (cnt > OFS_IN_SZ) return -EINVAL; 2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int and iommu->mmio_phys_end is u64 if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64)) return -EINVAL; 3. The show handlers would currently catch the negative number and refuse to perform the read. Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the input, and check for negative values to explicitly prevent out-of-bounds memory accesses directly in iommu_mmio_write() and iommu_capability_write().

In the Linux kernel, the following vulnerability has been resolved: test_kprobes: clear kprobes between test runs Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run).

In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix a reference leak in a6xx_gpu_init() In a6xx_gpu_init(), node is obtained via of_parse_phandle(). While there was a manual of_node_put() at the end of the common path, several early error returns would bypass this call, resulting in a reference leak. Fix this by using the __free(device_node) cleanup handler to release the reference when the variable goes out of scope. Patchwork: https://patchwork.freedesktop.org/patch/700661/

In the Linux kernel, the following vulnerability has been resolved: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate Add Extended Advertising Data length MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty.

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix register corruption from uninitialized cregs on error compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when user_regset_copyin() fails. Since cregs is an uninitialized stack variable, a copyin failure causes uninitialized stack data to be written into the target task's pt_regs, corrupting its register state and potentially leaking kernel stack contents. compat_restore_sigcontext() has the same issue: it calls cregs_to_regs() even when __copy_from_user() fails, leading to the same corruption of the signal-returning task's register state on error. Only call cregs_to_regs() when the user copy succeeds.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Make RX SKB per-port The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp().

In the Linux kernel, the following vulnerability has been resolved: tracing: Avoid NULL return from hist_field_name() on truncation hist_field_name() returns "" everywhere except the fully-qualified VAR_REF/EXPR case, where snprintf() truncation returns NULL early and bypasses the bottom NULL->"" guard. Callers don't expect NULL: strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758 and the strcmp() in the sort-key match loop at :4804 both deref it. system and event_name are bounded by MAX_EVENT_NAME_LEN, but the field name on a VAR_REF is kstrdup'd from a histogram variable name parsed out of the trigger string and has no length cap, so a long enough var name in a fully qualified reference can reach the truncation path. Keep the length check but leave field_name as "" on overflow.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Very litle impact on overall code size/complexity: $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta tcp_v6_rcv 3038 3042 +4 tcp_v4_rcv 3035 3039 +4 tcp_conn_request 2938 2923 -15 Total: Before=24436060, After=24436053, chg -0.00%

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ]

In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in rt6_fill_node() Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs).

In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized.

In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist.

ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated remote denial of service. Depending on heap layout and adjacent allocations, heap metadata corruption and further consequences beyond denial of service may be possible, though only denial of service is demonstrated by the supplied proof of concept.

proftpd

OpenClaw versions before 2026.6.6 contain an environment variable filtering vulnerability in host exec that fails to properly sanitize rustup startup variables. Attackers with lower-trust caller access or configured input paths can execute or persist actions beyond their intended authorization level.

openclaw

Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions prior to 3.3.0, the server interpolates untrusted environment variables (e.g., KERNEL_XXX) into Kubernetes manifests without YAML-aware escaping, enabling YAML injection attacks. Attackers can inject new fields, overwrite critical fields (e.g., duplicate securityContext keys, where the last one prevails), and inject document boundaries (--- for new documents, ... for end-of-document) to generate multiple resources, potentially creating arbitrary types, such as privileged pods. The Jinja2 template for the Kubernetes manifest contains several kernel_xxx variables, such as kernel_working_dir that are used when rendering the manifest and are all vectors for YAML injection. This issue has been fixed in version 3.3.0.

jupyter