In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers.

In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367)

ProFTPD before 1.3.9c and 1.3.10rc3 contains a signed integer overflow vulnerability in the mod_sftp module's SCP size-record parser that allows authenticated low-privilege attackers to bypass ASLR by sending a crafted file size value of UINT64_MAX, which results in a negative off_t value. Attackers can exploit the subsequent conversion to uint32_t, causing an approximately 4 GB requested read length and forcing the server to read beyond the end of the SSH channel data and write overread process memory into the uploaded file. In tested configurations, the disclosed data contains libc, libcrypto, and PIE pointers sufficient to derive their randomized base addresses, thereby bypassing ASLR and enabling reliable exploitation of memory corruption vulnerabilities in the same process.

proftpd

ProFTPD before 1.3.9c and 1.3.10rc3 contains a heap-based buffer overflow vulnerability in the mod_sftp module that allows authenticated low-privilege attackers to achieve arbitrary code execution by sending crafted SFTP packet fragments exceeding the 16 KB reassembly buffer in the fxp.c component. Attackers can supply oversized fragments to trigger an incorrectly conditioned reallocation, corrupt pool freelist metadata, overwrite the root_fs BSS global pointer to reference a fake filesystem struct, and redirect pr_fsio_stat() to system() via a crafted RENAME request.

proftpd

FreeRDP before 3.28.0 (affected 3.x through 3.27.1) contains a double-free vulnerability in freerdp_client_rdp_file_apply_to_settings() (client/common/file.c) when parsing the selectedmonitors field of a .rdp connection file. The MonitorIds array is allocated through the settings object, and a raw non-owning pointer to it is freed on the strtoul error path without clearing settings->MonitorIds, leaving it dangling; at teardown freerdp_settings_free() frees the same buffer again. An attacker who convinces a victim to open a crafted .rdp file with oversized monitor tokens can trigger a size-controlled double-free in any FreeRDP CLI client (xfreerdp/sdl-freerdp/wlfreerdp) in the default configuration.

freerdp

FreeRDP before 3.28.0 (affected <=3.27.1) contains a heap-based buffer overflow in crypto_rsa_common() (libfreerdp/crypto/crypto.c). The function writes the modular-exponentiation result into the caller's output buffer via BN_bn2bin() and only afterward checks output_length > out_length, so out-of-bounds bytes are written before the bounds check. On the server side, when a client selects RDP Standard Security, the encrypted client random is decrypted into a fixed 32-byte buffer. Because the server publishes its RSA public key, an unauthenticated attacker can forge a ciphertext whose decrypted value is up to the full modulus length (e.g. 256 bytes for RSA-2048), overflowing the 32-byte heap buffer by up to ~224 attacker-controlled bytes pre-authentication, resulting in denial of service.

freerdp

In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: fix memory block reference leak in poison accounting memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison.

In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix memory block reference leak on remove Patch series "mm: Fix memory block leaks and locking", v2. This series fixes two memory block device reference leaks and one locking issue around the per-memory_block hwpoison counter. This patch (of 2): remove_memory_blocks_and_altmaps() looks up each memory block with find_memory_block(), which acquires a reference to the memory block device. That reference is never dropped on this path, resulting in a leaked device reference when removing memory blocks and their altmaps. Drop the reference after retrieving mem->altmap and clearing mem->altmap, before removing the memory block device.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way.

In the Linux kernel, the following vulnerability has been resolved: spi: qup: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: spi: ep93xx: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: spi: sprd: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] <TASK> [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter().

In the Linux kernel, the following vulnerability has been resolved: test_kprobes: clear kprobes between test runs Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run).

In the Linux kernel, the following vulnerability has been resolved: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() In idpf_ptp_init(), read_dev_clk_lock is initialized after ptp_schedule_worker() had already been called (and after idpf_ptp_settime64() could reach the lock). The PTP aux worker fires immediately upon scheduling and can call into idpf_ptp_read_src_clk_reg_direct(), which takes spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering the lockdep "non-static key" warning: [12973.796587] idpf 0000:83:00.0: Device HW Reset initiated [12974.094507] INFO: trying to register non-static key. ... [12974.097208] Call Trace: [12974.097213] <TASK> [12974.097218] dump_stack_lvl+0x93/0xe0 [12974.097234] register_lock_class+0x4c4/0x4e0 [12974.097249] ? __lock_acquire+0x427/0x2290 [12974.097259] __lock_acquire+0x98/0x2290 [12974.097272] lock_acquire+0xc6/0x310 [12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190 [12974.097318] ? finish_task_switch.isra.0+0xd2/0x350 [12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp] [12974.097343] _raw_spin_lock+0x30/0x40 [12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097391] ? kthread_worker_fn+0x88/0x3d0 [12974.097404] ? kthread_worker_fn+0x4e/0x3d0 [12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf] [12974.097428] ? _raw_spin_unlock_irq+0x28/0x50 [12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf] [12974.097454] ptp_aux_kworker+0x20/0x40 [ptp] [12974.097464] kthread_worker_fn+0xd5/0x3d0 [12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10 [12974.097482] kthread+0xf4/0x130 [12974.097489] ? __pfx_kthread+0x10/0x10 [12974.097498] ret_from_fork+0x32c/0x410 [12974.097512] ? __pfx_kthread+0x10/0x10 [12974.097519] ret_from_fork_asm+0x1a/0x30 [12974.097540] </TASK> Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock is not touched before it's been initialized.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix zeropoint update where i_size > remote_i_size Fix the update of the zero point[*] by netfs_release_folio() when there is uncommitted data in the pagecache beyond the folio being released but the on-server EOF is in this folio (ie. i_size > remote_i_size). The update needs to limit zero_point to remote_i_size, not i_size as i_size is a local phenomenon reflecting updates made locally to the pagecache, not stuff written to the server. remote_i_size tracks the server's i_size. [*] The zero point is the file position from which we can assume that the server will just return zeros, so we can avoid generating reads. Note that netfs_invalidate_folio() probably doesn't need fixing as zero_point should be updated by setattr after truncation or fallocate. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x1bbae 0x82864 write 0x3ef2e 0xf9c8 0x1bbae write 0x67e05 0xcb5a 0x4e8f6 mapread 0x57781 0x85b6 0x7495f copy_range 0x5d3d 0x10329 0x54fac 0x7495f write 0x64710 0x1c2b 0x7495f mapread 0x64000 0x1000 0x7495f on cifs with the default cache option. It shows read-gaps on folio 0x64 failing with a short read (ie. it hits EOF) if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix metabuf leak in inode xattr initialization commit bb88e8da0025 ("erofs: use meta buffers for xattr operations") converted xattr operations to use on-stack erofs_buf instances. erofs_init_inode_xattrs() uses such a metabuf while reading the inline xattr header and shared xattr id array. Some error paths after erofs_read_metabuf() leave through out_unlock without dropping the metabuf, so the folio reference can leak. Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a no-op if no folio has been acquired, and this keeps all paths after taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix dma_buffer leak on bus acquire failure wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at the top of the function and uses a 'fail:' label to free it via kfree(dma_buffer) on error. All later error paths correctly use 'goto fail' to route through this cleanup. However, the early failure path after the first acquire_bus() call uses a bare 'return ret;', which leaks dma_buffer whenever the bus acquire fails. Replace the early return with goto fail so the existing cleanup path runs. Found via a custom Coccinelle semantic patch hunting for kmalloc'd locals leaked on early-return error paths in driver firmware-download code.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: close durable scavenger races against m_fp_list lookups ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.

In the Linux kernel, the following vulnerability has been resolved: mm/memory: fix spurious warning when unmapping device-private/exclusive pages Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] <TASK> [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ---truncated---