In the Linux kernel, the following vulnerability has been resolved: inet: frags: flush pending skbs in fqdir_pre_exit() We have been seeing occasional deadlocks on pernet_ops_rwsem since September in NIPA. The stuck task was usually modprobe (often loading a driver like ipvlan), trying to take the lock as a Writer. lockdep does not track readers for rwsems so the read wasn't obvious from the reports. On closer inspection the Reader holding the lock was conntrack looping forever in nf_conntrack_cleanup_net_list(). Based on past experience with occasional NIPA crashes I looked thru the tests which run before the crash and noticed that the crash follows ip_defrag.sh. An immediate red flag. Scouring thru (de)fragmentation queues reveals skbs sitting around, holding conntrack references. The problem is that since conntrack depends on nf_defrag_ipv6, nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first its netns exit hooks run _after_ conntrack's netns exit hook. Flush all fragment queue SKBs during fqdir_pre_exit() to release conntrack references before conntrack cleanup runs. Also flush the queues in timer expiry handlers when they discover fqdir->dead is set, in case packet sneaks in while we're running the pre_exit flush. The commit under Fixes is not exactly the culprit, but I think previously the timer firing would eventually unblock the spinning conntrack.

Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below of the Python HTTP parser may allow a request smuggling attack with the presence of non-ASCII characters. If a pure Python version of AIOHTTP is installed (i.e. without the usual C extensions) or AIOHTTP_NO_EXTENSIONS is enabled, then an attacker may be able to execute a request smuggling attack to bypass certain firewalls or proxy protections. This issue is fixed in version 3.13.3.

aiohttp

In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk

An issue was discovered in DriveLock 24.1 through 24.1.*, 24.2 through 24.2.*, and 25.1 before 25.1.6. Users with the "Manage roles and permissions" privilege can promote themselves or other DOC users to the Supervisor role through an API call. This privilege is included by default in the Administrator role. This issue mainly affects cloud multi-tenant deployments; on-prem single-tenant installations are typically not impacted because local admins usually already have Supervisor privileges.

drivelock

CHOCO TEI WATCHER mini (IB-MCT001) contains an issue with improper check for unusual or exceptional conditions. When the Video Download feature is in a specific communication state, the product's resources may be consumed abnormally.

inaba

CHOCO TEI WATCHER mini (IB-MCT001) contains an issue with improper check for unusual or exceptional conditions. If a remote attacker sends a specially crafted request to the Video Download interface, the system may become unresponsive.

inaba

Servify Express is a Node.js package to start an Express server and log the port it's running on. Prior to 1.2, the Express server used express.json() without a size limit, which could allow attackers to send extremely large request bodies. This can cause excessive memory usage, degraded performance, or process crashes, resulting in a Denial of Service (DoS). Any application using the JSON parser without limits and exposed to untrusted clients is affected. The issue is not a flaw in Express itself, but in configuration. This issue is fixed in version 1.2. To work around, consider adding a limit option to the JSON parser, rate limiting at the application or reverse-proxy level, rejecting unusually large requests before parsing, or using a reverse proxy (such as NGINX) to enforce maximum request body sizes.

servify-express.js

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Portabilis i-Educar allows Stored Cross-Site Scripting (XSS) via the matricula_interna parameter in the educar_usuario_cad.php endpoint. This issue affects i-Educar: 2.10.0.

portabilis

NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause an improper check for unusual or exceptional conditions issue by sending extra large payloads. A successful exploit of this vulnerability may lead to denial of service.

nvidia · linux

In gokey versions <0.2.0, a flaw in the seed decryption logic resulted in passwords incorrectly being derived solely from the initial vector and the AES-GCM authentication tag of the key seed. This issue has been fixed in gokey version 0.2.0. This is a breaking change. The fix has invalidated any passwords/secrets that were derived from the seed file (using the -s option). Even if the input seed file stays the same, version 0.2.0 gokey will generate different secrets. Impact This vulnerability impacts generated keys/secrets using a seed file as an entropy input (using the -s option). Keys/secrets generated just from the master password (without the -s option) are not impacted. The confidentiality of the seed itself is also not impacted (it is not required to regenerate the seed itself). Specific impact includes: * keys/secrets generated from a seed file may have lower entropy: it was expected that the whole seed would be used to generate keys (240 bytes of entropy input), where in vulnerable versions only 28 bytes was used * a malicious entity could have recovered all passwords, generated from a particular seed, having only the seed file in possession without the knowledge of the seed master password Patches The code logic bug has been fixed in gokey version 0.2.0 and above. Due to the deterministic nature of gokey, fixed versions will produce different passwords/secrets using seed files, as all seed entropy will be used now. System secret rotation guidance It is advised for users to regenerate passwords/secrets using the patched version of gokey (0.2.0 and above), and provision/rotate these secrets into respective systems in place of the old secret. A specific rotation procedure is system-dependent, but most common patterns are described below. Systems that do not require the old password/secret for rotation Such systems usually have a "Forgot password" facility or a similar facility allowing users to rotate their password/secrets by sending a unique "magic" link to the user's email or phone. In such cases users are advised to use this facility and input the newly generated password secret, when prompted by the system. Systems that require the old password/secret for rotation Such systems usually have a modal password rotation window usually in the user settings section requiring the user to input the old and the new password sometimes with a confirmation. To generate/recover the old password in such cases users are advised to: * temporarily download gokey version 0.1.3 https://github.com/cloudflare/gokey/releases/tag/v0.1.3 for their respective operating system to recover the old password * use gokey version 0.2.0 or above to generate the new password * populate the system provided password rotation form Systems that allow multiple credentials for the same account to be provisioned Such systems usually require a secret or a cryptographic key as a credential for access, but allow several credentials at the same time. One example is SSH: a particular user may have several authorized public keys configured on the SSH server for access. For such systems users are advised to: * generate a new secret/key/credential using gokey version 0.2.0 or above * provision the new secret/key/credential in addition to the existing credential on the system * verify that the access or required system operation is still possible with the new secret/key/credential * revoke authorization for the existing/old credential from the system Credit This vulnerability was found by Théo Cusnir ( @mister_mime https://hackerone.com/mister_mime ) and responsibly disclosed through Cloudflare's bug bounty program.

cloudflare

An Improper Check for Unusual or Exceptional Conditions vulnerability in OpenSMTPD allows local users to crash OpenSMTPD. This issue affects openSUSE Tumbleweed: from ? before 7.8.0p0-1.1.

opensmtpd · opensuse

Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Drupal core allows Forceful Browsing.This issue affects Drupal core: from 8.0.0 before 10.4.9, from 10.5.0 before 10.5.6, from 11.0.0 before 11.1.9, from 11.2.0 before 11.2.8.

drupal

GoSign Desktop through 2.4.1 disables TLS certificate validation when configured to use a proxy server. This can be problematic if the GoSign Desktop user selects an arbitrary proxy server without consideration of whether outbound HTTPS connections from the proxy server to Internet servers succeed even for untrusted or invalid server certificates. In this scenario (which is outside of the product's design objectives), integrity protection could be bypassed. In typical cases of a proxy server for outbound HTTPS traffic from an enterprise, those connections would not succeed. (Admittedly, the usual expectation is that a client application is configured to trust an enterprise CA and does not set SSL_VERIFY_NONE.) Also, it is of course unsafe to place ~/.gosign in the home directory of an untrusted user and then have other users execute downloaded files.

A weakness has been identified in Intelbras UnniTI 24.07.11. The affected element is an unknown function of the file /xml/sistema/usuarios.xml. Executing manipulation of the argument Usuario/Senha can lead to unprotected storage of credentials. The attack can be executed remotely. The exploit has been made available to the public and could be exploited.

A security vulnerability has been detected in Intelbras ICIP 2.0.20. Affected is an unknown function of the file /xml/sistema/acessodeusuario.xml. Such manipulation of the argument NomeUsuario/SenhaAcess leads to unprotected storage of credentials. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

intelbras

Insecure Direct Object Reference (IDOR) vulnerability in DeporSite of T-INNOVA. This vulnerability allows an attacker to access or modify unauthorized resources by manipulating requests using the 'idUsuario' parameter in ‘/ajax/TInnova_v2/Formulario_Consentimiento/llamadaAjax/obtenerDatosConsentimientos’, which could lead to the exposure or alteration os confidential data.

pgAdmin <= 9.9  is affected by an LDAP injection vulnerability in the LDAP authentication flow that allows an attacker to inject special LDAP characters in the username, causing the DC/LDAP server and the client to process an unusual amount of data DOS.

pgadmin

In the Linux kernel, the following vulnerability has been resolved: usbnet: Fix using smp_processor_id() in preemptible code warnings Syzbot reported the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879 caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49 usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708 usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417 __dev_set_mtu net/core/dev.c:9443 [inline] netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496 netif_set_mtu+0xb0/0x160 net/core/dev.c:9520 dev_set_mtu+0xae/0x170 net/core/dev_api.c:247 dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572 dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821 sock_do_ioctl+0x19d/0x280 net/socket.c:1204 sock_ioctl+0x42f/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f For historical and portability reasons, the netif_rx() is usually run in the softirq or interrupt context, this commit therefore add local_bh_disable/enable() protection in the usbnet_resume_rx().

linux

Quipux 4.0.1 through e1774ac allows authenticated users to conduct SQL injection attacks via busqueda/busqueda.php txt_depe_codi, busqueda/busqueda.php txt_usua_codi, anexos_lista.php radi_temp, Administracion/listas/formArea_ajax.php codDepe, Administracion/listas/formDepeHijo_ajax.php codDepe, Administracion/listas/formDepePadre_ajax.php codInst, asociar_documentos/asociar_borrar_referencia.php radi_nume, asociar_documentos/asociar_documento_buscar_query.php radi_nume, asociar_documentos/asociar_documento_grabar.php txt_radi_nume, asociar_documentos/asociar_documento radi_nume, radicacion/buscar_usuario.php buscar_tipo, radicacion/formArea_ajax.php codDepe, radicacion/formDepeHijo_ajax.php codDepe, radicacion/formDepePadre_ajax.php codInst, radicacion/ver_datos_usuario.php destinatorio, reportes/reporte_TraspasoDocFisico.php verrad, tx/datos_imprimir_sobre.php txt_usua_codi, tx/datos_imprimir_sobre.php nume_radi_temp, tx/revertir_firma_digital_grabar.php txt_radi_nume, tx/tx_borrar_opcion_imp.php codigo_opc, tx/tx_realizar_tx.php txt_radicados, tx/tx_seguridad_documentos.php txt_radicados, or uploadFiles/cargar_doc_digitalizado_paginador.php txt_depe_codi.

quipux

Quipux 4.0.1 through e1774ac allows enumeration of usernames, and accessing the Ecuadorean identification number for all registered users via the Administracion/usuarios/cambiar_password_olvido_validar.php txt_login parameter.

quipux

A lack of authorisation vulnerability has been detected in CanalDenuncia.app. This vulnerability allows an attacker to access other users' information by sending a POST through the parameter 'id_user' in '/backend/api/buscarUsuarioId.php'.

canaldenuncia

A lack of authorisation vulnerability has been detected in CanalDenuncia.app. This vulnerability allows an attacker to access other users' information by sending a POST through the parameters 'id_denuncia' and 'seguro' in '/backend/api/buscarUsuarioByDenuncia.php'.

canaldenuncia