In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL.

linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707)

linux

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired.

linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11 The v11 MQD manager incorrectly assigned the CP-compute variants of checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow. During CRIU checkpoint of an SDMA queue on Navi3x: - checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspace During CRIU restore: - restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs) This is a copy-paste regression unique to v11. All other ASIC backends (cik, vi, v9, v10, v12) correctly use the SDMA-specific variants. Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly handle the smaller v11_sdma_mqd structure, matching the pattern used in other MQD managers. (cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c)

linux

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

linux

Impact: The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service. Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint. All releases starting at undici 6.17.0 are affected. Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds: No workaround is available. The fix must be applied through an upgrade.

nodejs

ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

ws_project

A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions.

LibreOffice Calc compiles cell formulas when opening a spreadsheet. A heap buffer overflow existed when compiling a very long formula made up of many opening tokens. The array that tracks nesting depth was allocated one element too small for that worst case, so such a formula wrote one element past its end. In fixed versions the array is sized to hold the largest possible nesting.

LibreOffice can import documents in the OOXML format (DOCX). A heap buffer overflow existed when replaying deferred parser events for a text box element. A handler object was assumed to be of one type and written to at that type's field layout, but it could be a smaller object, so the write landed past the end of the allocation. In fixed versions the type is checked before the write.

LibreOffice can import EMF+ graphics, which may be embedded in documents. A heap buffer overflow existed when importing an EMF+ gradient brush. The number of gradient blend points was read from the file and used to compute an allocation size, but that multiplication could overflow, so a small buffer was allocated and then filled as if it were large, writing past its end. In fixed versions the blend-point count is checked against the data actually available before allocating.

A flaw was found in GStreamer's WavPack audio decoder in gst-plugins-good. When processing a specially crafted WavPack file, an integer overflow in the buffer size calculation (4 * block_samples * channels) in gst_wavpack_dec_handle_frame() causes a very small heap allocation. The WavPack library then writes decoded audio samples far beyond the allocated buffer, resulting in heap memory corruption. This affects both 32-bit and 64-bit systems since the arithmetic is performed in 32-bit integers before promotion to the allocation size type. A remote attacker could use this flaw to crash an application or potentially execute arbitrary code by convincing a user to open a malicious WavPack audio file.

A vulnerability was found in the GStreamer RealMedia demuxer (gst-plugins-ugly). When processing a RealMedia (.rm) file, the demuxer parses MDPR (media properties) chunks to configure audio streams. For audio stream header versions 4 and 5, the parser reads fields such as codec type, packet size, sample rate, channel count, and extra codec data length from fixed offsets within the chunk without first checking that the chunk contains enough data. If a malicious file provides an MDPR chunk that is too small to contain a complete audio stream header, the parser reads beyond the end of the buffer. This can cause the application to crash. In some cases, bytes read past the buffer boundary may be incorporated into stream metadata, which could result in limited information disclosure.

A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger an out-of-bound write in the GPU user-space driver, leading to memory corruption and possible browser/GPU process crash. The software computes a required memory size from untrusted input, but integer overflow can produce a value smaller than needed. Subsequent write operations may then occur past the intended memory boundary, corrupting adjacent memory and causing process instability or termination.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.77 and 9.9.1-alpha.1, an unauthenticated attacker who knows a publicly-known Parse Application ID can submit a single HTTP request whose client SDK version field contains adversarial input that triggers polynomial backtracking in a request-header parser. The parsing runs before session authentication and before rate limiting on every /parse/* request, so the request consumes seconds to minutes of synchronous CPU on a Node.js worker before any access control evaluates it. A small number of concurrent requests can saturate a worker; a single large request via the body-field variant can pin a worker for minutes. Production deployments running the default configuration are affected. This issue has been patched in versions 8.6.77 and 9.9.1-alpha.1.

Nuxt is an open-source web development framework for Vue.js. From versions 3.11.0 to before 3.21.7 and 4.0.0 to before 4.4.7, there is a route-rule middleware bypass via case-sensitivity mismatch between vue-router and the routeRules matcher. This issue has been patched in versions 3.21.7 and 4.4.7.

nuxt

Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

netty

FPDI is a collection of PHP classes that facilitate reading pages from existing PDF documents and using them as templates in FPDF. Prior to version 2.6.7, an attacker can upload a small, malicious PDF file that will cause the server-side script to crash due to memory exhaustion or a script time-out. Repeated attacks can lead to sustained service unavailability. This issue has been patched in version 2.6.7.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-25, when providing invalid options to the wand option parser a small memory leak will occur. This issue has been patched in version 7.1.2-25.

imagemagick

Dulwich is a pure-Python implementation of the Git file formats and protocols. Starting in version 0.1.0 and prior to version 1.2.5, a client with push access could push a tiny crafted thin pack (~174 bytes) whose delta header declares a huge dest_size. When dulwich ingested it via add_thin_pack / apply_delta, it would allocate hundreds of MB of memory based on that attacker-controlled size, with no relationship to the actual bytes received. Operators running a Dulwich-based Git server that exposes git-receive-pack (i.e. accepts pushes) - for example via dulwich.server functionality, the HTTP smart server, or anything built on ReceivePackHandler - are impacted. The issue is patched in 1.2.5. add_thin_pack now accepts a max_input_size keyword (bytes; 0/None = unlimited, matching git's semantics), and ReceivePackHandler reads receive.maxInputSize from the repository config and passes it through. Wire reads are counted and a PackInputTooLarge exception is raised once the cap is exceeded - equivalent to git index-pack --max-input-size. Users should upgrade to Dulwich 1.2.5 or later and set receive.maxInputSize in their server's repository config to a sane bound for their environment. On unpatched versions, receive.maxInputSize has no effect, so it cannot be used as a workaround. Until upgrading, operators should restrict dulwich-receive-pack (push) access to trusted, authenticated clients only, or disable it entirely on servers that only need to serve fetches and/or run the server under an OS-level memory limit (e.g. ulimit, cgroups/MemoryMax, or a container memory limit) so a malicious push is killed rather than taking down the host.

Russh is a Rust SSH client & server library. From version 0.34.0-beta.1 to before version 0.61.0, the russh server authentication path keeps internal userauth state across SSH_MSG_USERAUTH_REQUEST messages without separating that state when the request principal changes. RFC 4252 allows the user name and service name fields to change between authentication requests. The issue is not that such changes are invalid. The issue is that russh-owned authentication state, such as remaining methods, partial-success state, and in-progress method state, can remain associated with the connection and then influence a later request for a different (user, service). This is an internal library state mismatch. This issue has been patched in version 0.61.0.

A command injection vulnerability in Palo Alto Networks PAN-OS® software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS CLI or Web UI. The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators and by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series). Cloud NGFW and Prisma® Access are not affected by this vulnerability.

A privilege escalation vulnerability in Palo Alto Networks PAN-OS® software allows an authenticated administrator with access to the Command Line Interface (CLI) to perform actions on the device with root privileges. The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators and by restricting access to the management interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series). Cloud NGFW, and Prisma® Access are not impacted by this vulnerability.