OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader  Versions Affected:  before 1.9.5 before 2.5.9 before 3.0.0-M3  Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.   Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.

apache

WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the internet.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the gateway POST parameter. Attackers can exploit unsanitized parameter concatenation in the set_add_routing function to inject shell commands that are executed via popen() with partial output reflected in the HTTP response.

n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the SeaTable node's row:search and row:get operations allowed user-controlled input to be concatenated directly into SQL query strings without escaping or parameterization. In workflows where external user input is passed via expressions into the SeaTable node's search or row retrieval parameters, an attacker could manipulate the constructed query to retrieve unintended rows from the connected SeaTable base, bypassing row-level filtering logic implemented in the workflow. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1.

n8n

Evolver is a GEP-powered self-evolving engine for AI agents. Prior to version 1.69.3, a command injection vulnerability in the _extractLLM() function allows attackers to execute arbitrary shell commands on the server. The function constructs a curl command using string concatenation and passes it to execSync() without proper sanitization, enabling remote code execution when the corpus parameter contains shell metacharacters. This issue has been patched in version 1.69.3.

The Geo Mashup plugin for WordPress is vulnerable to Time-Based SQL Injection via the 'map_post_type' parameter in all versions up to, and including, 1.13.18. This is due to the `SearchResults` hook explicitly calling `stripslashes_deep($_POST)` which removes WordPress magic quotes protection, followed by the unsanitized `map_post_type` value being concatenated into an `IN(...)` clause without `esc_sql()` or `$wpdb->prepare()`. The 'any' branch of the same code correctly applies `array_map('esc_sql', ...)`, but the else branch does not. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database via a time-based blind approach. Exploitation requires the Geo Search feature to be enabled in plugin settings.

The Widget Options – Advanced Conditional Visibility for Gutenberg Blocks & Classic Widgets plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.2.2 via the Display Logic feature. This is due to the plugin using eval() on user-supplied Display Logic expressions with an insufficient blocklist/allowlist that can be bypassed using array_map with string concatenation, combined with a lack of authorization enforcement on the extended_widget_opts_block attribute. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server. The vulnerability was partially patched in version 4.2.0.

The Gravity Forms plugin for WordPress is vulnerable to Unauthenticated Stored Cross-Site Scripting in versions up to and including 2.10.0. This is due to insufficient input validation and output escaping of Calculation Product field product names when rendered inside Repeater fields. The validate() method in the GF_Field_Calculation class only validates the quantity field (.3) and completely ignores the product name field (.1), allowing malicious HTML to pass through validation. When the value is saved, the sanitize_entry_value() method returns the raw value without sanitization for fields where HTML is not expected. Subsequently, when an entry is viewed in wp-admin, the get_value_entry_detail() method concatenates the unescaped product name directly into the output string, which is then rendered by the repeater's get_value_entry_detail() method without further escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts via form submissions that will execute whenever an authenticated administrator with the gravityforms_view_entries capability accesses the entry detail page.

Dancer::Session::Abstract versions through 1.3522 for Perl generates session ids insecurely. The session id is generated from summing the character codepoints of the absolute pathname with the process id, the epoch time and calls to the built-in rand() function to return a number between 0 and 999-billion, and concatenating that result three times. The path name might be known or guessed by an attacker, especially for applications known to be written using Dancer with standard installation locations. The epoch time can be guessed by an attacker, and may be leaked in the HTTP header. The process id comes from a small set of numbers, and workers may have sequential process ids. The built-in rand() function is seeded with 32-bits and is considered unsuitable for security applications. Predictable session ids could allow an attacker to gain access to systems.

perldancer

The Woostify plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 2.5.0 This is due to insufficient input sanitization and output escaping in the bundled Lity.js lightbox library, where user-controlled input from the href attribute is concatenated directly into a jQuery HTML string without sanitization. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

ProjeQtor versions 7.0 through 12.4.3 contain an unauthenticated SQL injection vulnerability in the login functionality where the login variable is directly concatenated into a SQL query without parameterization or sanitization. Attackers can inject arbitrary SQL expressions through the username field at the authentication endpoint to create privileged accounts, read sensitive data, and execute operating system commands if the database user has elevated permissions.

Dgraph is an open source distributed GraphQL database. Prior to 25.3.3, a vulnerability has been found in Dgraph that gives an unauthenticated attacker full read access to every piece of data in the database. This affects Dgraph's default configuration where ACL is not enabled. The attack requires two HTTP POSTs to port 8080. The first sets up a schema predicate with @unique @index(exact) @lang via /alter (also unauthenticated in default config). The second sends a crafted JSON mutation to /mutate?commitNow=true where a JSON key contains the predicate name followed by @ and a DQL injection payload in the language tag position. The injection exploits the addQueryIfUnique function in edgraph/server.go, which constructs DQL queries using fmt.Sprintf with unsanitized predicateName that includes the raw pred.Lang value. The Lang field is extracted from JSON mutation keys by x.PredicateLang(), which splits on @, and is never validated by any function in the codebase. The attacker injects a closing parenthesis to escape the eq() function, adds an arbitrary named query block, and uses a # comment to neutralize trailing template syntax. The injected query executes server-side and its results are returned in the HTTP response. This vulnerability is fixed in 25.3.3.

dgraph

Dgraph is an open source distributed GraphQL database. Prior to 25.3.3, a vulnerability has been found in Dgraph that gives an unauthenticated attacker full read access to every piece of data in the database. This affects Dgraph's default configuration where ACL is not enabled. The attack is a single HTTP POST to /mutate?commitNow=true containing a crafted cond field in an upsert mutation. The cond value is concatenated directly into a DQL query string via strings.Builder.WriteString after only a cosmetic strings.Replace transformation. No escaping, parameterization, or structural validation is applied. An attacker injects an additional DQL query block into the cond string, which the DQL parser accepts as a syntactically valid named query block. The injected query executes server-side and its results are returned in the HTTP response. This vulnerability is fixed in 25.3.3.

dgraph

The ITERAS plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple shortcodes (iteras-ordering, iteras-signup, iteras-paywall-login, iteras-selfservice) in all versions up to and including 1.8.2. This is due to insufficient input sanitization and output escaping in the combine_attributes() function. The function directly concatenates shortcode attribute values into JavaScript code within <script> tags using double-quoted string interpolation (line 489: '"'.$key.'": "'.$value.'"') without any escaping. An attacker can break out of the JavaScript string context by including a double-quote character in a shortcode attribute value and inject arbitrary JavaScript. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

hackage-server lacked Cross-Site Request Forgery (CSRF) protection across its endpoints. Scripts on foreign sites could trigger requests to hackage server, possibly abusing latent credentials to upload packages or perform other administrative actions. Some unauthenticated actions could also be abused (e.g. creating new user accounts).

A critical XSS vulnerability affected hackage-server and hackage.haskell.org. HTML and JavaScript files provided in source packages or via the documentation upload facility were served as-is on the main hackage.haskell.org domain. As a consequence, when a user with latent HTTP credentials browses to the package pages or documentation uploaded by a malicious package maintainer, their session can be hijacked to upload packages or documentation, amend maintainers or other package metadata, or perform any other action the user is authorised to do.

EspoCRM is an open source customer relationship management application. Prior to version 9.3.4, EspoCRM's built-in formula scripting engine allowing updating attachment's sourceId thus allowing an authenticated admin to overwrite the `sourceId` field on `Attachment` entities. Because `sourceId` is concatenated directly into a file path with no sanitization in `EspoUploadDir::getFilePath()`, an attacker can redirect any file read or write operation to an arbitrary path within the web server's `open_basedir` scope. Version 9.3.4 fixes the issue.

espocrm

In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path.

linux

The Table Manager plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.0 via the 'table_manager' shortcode. The shortcode handler `tablemanager_render_table_shortcode()` takes a user-controlled `table` attribute, applies only `sanitize_key()` for sanitization, and concatenates the value with `$wpdb->prefix` to form a full database table name. It then executes `DESC` and `SELECT *` queries against this table and renders all rows and columns to the frontend. There is no allowlist check to ensure only plugin-created tables can be accessed — the `tablemanager_created_tables` option is only referenced in admin functions, never in the shortcode handler. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive data from arbitrary WordPress database tables.

The WPMK Block plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'class' shortcode attribute in all versions up to and including 1.0.1. This is due to insufficient input sanitization and output escaping on user-supplied shortcode attributes. Specifically, in the wpmk_block_shortcode() function, the 'class' attribute is extracted from user-controllable shortcode attributes and directly concatenated into an HTML div element's class attribute without any escaping (e.g., esc_attr()). This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Twittee Text Tweet plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'id' shortcode attribute in all versions up to and including 1.0.8. This is due to insufficient input sanitization and output escaping on user-supplied shortcode attributes. The ttt_twittee_tweeter() function uses extract() to pull shortcode attributes into local variables and then directly concatenates them into HTML output without any escaping. Specifically, the $id parameter is inserted into an HTML id attribute context without esc_attr(), allowing an attacker to break out of the attribute and inject arbitrary HTML event handlers. Additionally, the $tweet, $content, $balloon, and $theme attributes are similarly injected into inline JavaScript without escaping (lines 87, 93, 101, 117). This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

WWBN AVideo is an open source video platform. In versions 29.0 and below, the `cloneServer.json.php` endpoint in the CloneSite plugin constructs shell commands using user-controlled input (`url` parameter) without proper sanitization. The input is directly concatenated into a `wget` command executed via `exec()`, allowing command injection. An attacker can inject arbitrary shell commands by breaking out of the intended URL context using shell metacharacters (e.g., `;`). This leads to Remote Code Execution (RCE) on the server. Commit 473c609fc2defdea8b937b00e86ce88eba1f15bb contains a fix.

wwbn

WWBN AVideo is an open source video platform. In versions 29.0 and prior, the locale save endpoint (`locale/save.php`) constructs a file path by directly concatenating `$_POST['flag']` into the path at line 30 without any sanitization. The `$_POST['code']` parameter is then written verbatim to that path via `fwrite()` at line 40. An admin attacker (or any user who can CSRF an admin, since no CSRF token is checked and cookies use `SameSite=None`) can traverse out of the `locale/` directory and write arbitrary `.php` files to any writable location on the filesystem, achieving Remote Code Execution. Commit 57f89ffbc27d37c9d9dd727212334846e78ac21a fixes the issue.

wwbn