In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state.

In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync() iso_conn_big_sync() drops the socket lock to call hci_get_route() and then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards without re-checking that conn is still valid. While the lock is dropped, the connection can be torn down under the same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del() sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the lock and reads conn->hcon, conn may be NULL, causing a NULL pointer dereference (hcon is the first member of struct iso_conn). This path is reached from iso_sock_recvmsg() for a PA-sync broadcast sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock window can race with connection teardown driven by controller events. Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket lock and bail out if the connection went away, as already done in the sibling iso_sock_rebind_bc().

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.

In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different.

Milkdown before 7.21.3 contains a stored cross-site scripting vulnerability in the @milkdown/preset-commonmark and @milkdown/components packages that allows attackers with document write access to execute arbitrary JavaScript in the browser context of any user who opens the document or clicks a rendered link. The parseMarkdown runner stores raw URL values from the remark AST as href mark attributes without URL scheme validation, and the ineffective DOMPurify.sanitize call in edit-view.ts treats the bare URL string as a text node and returns it unchanged, allowing javascript: payloads to pass through the link-tooltip preview component and read-only mode anchor elements unmodified.

Suna before 0.9.102 contains a broken access control vulnerability in the message queue API that allows authenticated attackers to access and manipulate queue resources belonging to other users by exploiting missing ownership and account isolation checks. Attackers can read pending prompt queues of all users, read or delete individual sessions, and inject arbitrary prompts into another user's session queue, causing the background drainer to forward malicious messages to the victim's running AI agent with the victim's credentials and permissions.

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Disable broadcast TLB flush when PCID is disabled Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains enabled. There are two checks that decide whether the global ASID code runs, mm_global_asid() and consider_global_asid(), that key off of the X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three CPUs, consider_global_asid() assigns it a global ASID, after which flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set results in a #GP: Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full) Hardware name: ... RIP: 0010:broadcast_tlb_flush Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ... Call Trace: <TASK> flush_tlb_mm_range ptep_clear_flush wp_page_copy ? _raw_spin_unlock __handle_mm_fault handle_mm_fault do_user_addr_fault exc_page_fault asm_exc_page_fault All processors that support broadcast TLB invalidation also have PCID support, so it is only the "nopcid" scenario that is of concern. In this situation just disable the broadcast TLB support using the CPUID dependency support by making X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID. [ bp: Massage commit message. ]

Reflected Cross-Site Scripting (CWE-79) in LWEB802 in Loytec LWEB-802 before 5.0.8 on all platforms allows an unauthenticated remote attacker to execute arbitrary JavaScript in a victim's browser and perform actions with the victim's privileges via a crafted link containing a malicious `project` or `mspParams` parameter.

Exposure of Sensitive Information (CWE-200) in LWEB802 browser `localStorage` in Loytec LWEB-802 before 5.0.8 on all platforms allows an unauthenticated remote attacker to leak stored management credentials via a crafted link.

Stored Cross-Site Scripting (CWE-79) in the OPC XML-DA server statistics in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to execute arbitrary JavaScript in an administrator's browser (session hijacking, credential theft, device reconfiguration) via a crafted `User-Agent` header in a `POST /da` request.

Note: The CVE and blog post don't exist because we determined this is actually a cloud-only issue. Access Controls are “Broken” when a user can access resources they are not authorized to access. An attacker can bypass any access control mechanisms in a web application, and gain unauthorized access to resources that are not available with their permissions. Broken access control can allow attackers to: Access resources only accessible to certain users, thus allowing unauthorized access to data Perform operations on behalf of other users, leading to account takeovers in the worst cases Attempt privilege escalation Attempt to take over an account

Improper Input Validation vulnerability in Apache NimBLE in Mesh Proxy SAR reassembly could result in passing broken data toward application resulting in memory pressure and unstable parsing behavior. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

apache

A flaw was found in dbus-broker. When the process file-descriptor limit is reached, EMFILE/ENFILE errors during peer setup (notably SO_PEERPIDFD) are handled as fatal failures, causing the broker to exit. A local attacker who can open many connections to the user session bus can trigger this and deny service to the desktop session. Flatpak applications can reach the host session bus through the dbus proxy.

The VikBooking Hotel Booking Engine & PMS plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'category_id' parameter in all versions up to, and including, 1.8.13 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This is limited to browsers that support access keys as the injection is in a hidden element.

The Fluent Support – Helpdesk & Customer Support Ticket System plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'redirect-to' Shortcode Attribute in all versions up to, and including, 2.3.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The XSS payload is in a hidden attribute so it only fires in specific browsers when specific access keys are used making exploitation unlikely.

The WP Hotel Booking plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'widget_search' Shortcode Attribute in all versions up to, and including, 2.3.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on browsers where access keys can be used as the payload is stored in a hidden attribute.

The Post Grid Gutenberg Blocks – PostX plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'searchnoresult' Block Attribute in all versions up to, and including, 5.0.32 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is particularly concerning in a cross-privilege scenario where a Contributor creates a pending or draft post containing the malicious block attribute, which then executes arbitrary JavaScript in the browser session of an Editor or Administrator who previews that post.

nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.4, the `/api/v1/*` route surface trusts the bearer token alone for authorisation on most endpoints. The codebase itself admits this at `internal/api/hosts.go:384`: "API trusts the bearer token for authorisation; per-CA ownership is enforced only in the Web layer." The Web UI gates state-changing routes through `loadAccessibleCA` (`internal/web/cas.go`); CA-management endpoints in `internal/api/cas.go` ALSO have proper `canAccessCA` gates. The gap is on the host, network, firewall, mobile-bundle, and most operator endpoints. Combined with the per-operator CA model from ADR 0002, this gives any non-admin operator API key broad cross-tenant access — instant privilege escalation in the worst case. Version 0.3.4 fixes the issue.