On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPCs (Modular Port Concentrators) where Integrated Routing and Bridging (IRB) interfaces are configured and mapped to a VPLS instance or a Bridge-Domain, certain Layer 2 network events at Customer Edge (CE) devices may cause memory leaks in the MPC of Provider Edge (PE) devices which can cause an out of memory condition and MPC restart. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines), including MX-MPC1-3D, MX-MPC1E-3D, MX-MPC2-3D, MX-MPC2E-3D, MPC-3D-16XGE, and CHAS-MXxx Series MPCs. No other products or platforms are affected by this issue. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.2 versions prior to 20.2R1-S3, 20.2R2; 20.3 versions prior to 20.3R1-S1,, 20.3R2. This issue does not affect Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R3-S2; 18.1; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R3-S1; 19.1; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.

juniper

An improper check for unusual or exceptional conditions vulnerability in Juniper Networks MX Series platforms with Trio-based MPC (Modular Port Concentrator) deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, may allow an attacker sending specific Layer 2 traffic to cause Distributed Denial of Service (DDoS) protection to trigger unexpectedly, resulting in traffic impact. Continued receipt and processing of this specific Layer 2 frames will sustain the Denial of Service (DoS) condition. An indication of compromise is to check DDOS LACP violations: user@device> show ddos-protection protocols statistics brief | match lacp This issue only affects the MX Series platforms with Trio-based MPC. No other products or platforms are affected. This issue affects: Juniper Networks Junos OS on MX Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2;

juniper

A vulnerability has been identified in APOGEE PXC Compact (BACnet) (All versions < V3.5.5), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.20), APOGEE PXC Modular (BACnet) (All versions < V3.5.5), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.20), Nucleus NET (All versions < V5.2), Nucleus ReadyStart V3 (All versions < V2012.12), Nucleus Source Code (All versions), PLUSCONTROL 1st Gen (All versions), TALON TC Compact (BACnet) (All versions < V3.5.5), TALON TC Modular (BACnet) (All versions < V3.5.5). Initial Sequence Numbers (ISNs) for TCP connections are derived from an insufficiently random source. As a result, the ISN of current and future TCP connections could be predictable. An attacker could hijack existing sessions or spoof future ones.

siemens · arm · mips · powerpc_project

CKEditor 5 is an open source rich text editor framework with a modular architecture. The CKEditor 5 Markdown plugin (@ckeditor/ckeditor5-markdown-gfm) before version 25.0.0 has a regex denial of service (ReDoS) vulnerability. The vulnerability allowed to abuse link recognition regular expression, which could cause a significant performance drop resulting in browser tab freeze. It affects all users using CKEditor 5 Markdown plugin at version <= 24.0.0. The problem has been recognized and patched. The fix will be available in version 25.0.0.

ckeditor

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

juniper

When converting coordinates from projective to affine, the modular inversion was not performed in constant time, resulting in a possible timing-based side channel attack. This vulnerability affects Firefox < 80 and Firefox for Android < 80.

mozilla

The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak."

wolfssl

Improper conditions check for Intel(R) Modular Server MFS2600KISPP Compute Module may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.

intel

Insufficient control flow for Intel(R) Modular Server MFS2600KISPP Compute Module may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.

intel

Buffer overflow in Intel(R) Modular Server MFS2600KISPP Compute Module may allow an unauthenticated user to potentially enable denial of service via adjacent access.

intel

A vulnerability has been identified in APOGEE MEC/MBC/PXC (P2) (All versions < V2.8.2), APOGEE PXC Compact (BACnet) (All versions < V3.5.3), APOGEE PXC Compact (P2 Ethernet) (All versions >= V2.8.2 < V2.8.19), APOGEE PXC Modular (BACnet) (All versions < V3.5.3), APOGEE PXC Modular (P2 Ethernet) (All versions >= V2.8.2 < V2.8.19), Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Desigo PXC00-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC00-U (All versions >= V2.3x and < V6.00.327), Desigo PXC001-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC100-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC12-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC128-U (All versions >= V2.3x and < V6.00.327), Desigo PXC200-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC22-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC22.1-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC36.1-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC50-E.D (All versions >= V2.3 < V6.0.327), Desigo PXC64-U (All versions >= V2.3x and < V6.00.327), Desigo PXM20-E (All versions >= V2.3 < V6.0.327), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.3), Nucleus Source Code (All versions), SIMOTICS CONNECT 400 (All versions < V0.3.0.330), TALON TC Compact (BACnet) (All versions < V3.5.3), TALON TC Modular (BACnet) (All versions < V3.5.3). By sending specially crafted DHCP packets to a device where the DHCP client is enabled, an attacker could change the IP address of the device to an invalid value.

siemens

An issue was discovered in wolfSSL before 4.3.0 in a non-default configuration where DSA is enabled. DSA signing uses the BEEA algorithm during modular inversion of the nonce, leading to a side-channel attack against the nonce.

wolfssl

The mpi_powm function in Libgcrypt before 1.6.3 and GnuPG before 1.4.19 allows attackers to obtain sensitive information by leveraging timing differences when accessing a pre-computed table during modular exponentiation, related to a "Last-Level Cache Side-Channel Attack."

gnupg · debian

The web-based diagnostics console in Dell EMC iDRAC6 (Monolithic versions prior to 2.91 and Modular all versions) contains a command injection vulnerability. A remote authenticated malicious iDRAC user with access to the diagnostics console could potentially exploit this vulnerability to execute arbitrary commands as root on the affected iDRAC system.

dell

The encryption library in Cisco IOS Software 15.2(1)T, 15.2(1)T1, and 15.2(2)T, Cisco NX-OS in Cisco MDS 9222i Multiservice Modular Switch, Cisco MDS 9000 18/4-Port Multiservice Module, and Cisco MDS 9000 Storage Services Node module before 5.2(6), and Cisco IOS in Cisco VPN Services Port Adaptor for Catalyst 6500 12.2(33)SXI, and 12.2(33)SXJ when IP Security (aka IPSec) is used, allows remote attackers to obtain unencrypted packets from encrypted sessions.

cisco

The pstm_exptmod function in MatrixSSL 3.8.6 and earlier does not properly perform modular exponentiation, which might allow remote attackers to predict the secret key via unspecified vectors. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-6887.

matrixssl

The pstm_exptmod function in MatrixSSL 3.8.6 and earlier does not properly perform modular exponentiation, which might allow remote attackers to predict the secret key via a CRT attack.

matrixssl

The pstm_exptmod function in MatrixSSL before 3.8.4 allows remote attackers to cause a denial of service (invalid free and crash) via a base zero value for the modular exponentiation.

matrixssl

Botan before 1.10.13 and 1.11.x before 1.11.29 do not use a constant-time algorithm to perform a modular inverse on the signature nonce k, which might allow remote attackers to obtain ECDSA secret keys via a timing side-channel attack.

debian · fedoraproject · botan_project

SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 use the same hardcoded encryption key across different customers' installations, which allows attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

systech

flu.cgi in the web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 allows remote authenticated users to execute arbitrary commands via the 5066 (aka dnsmasq) parameter.

systech

The web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 has a default password, which makes it easier for remote attackers to obtain access via unspecified vectors.

systech

The MOD_EXP_CTIME_COPY_FROM_PREBUF function in crypto/bn/bn_exp.c in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g does not properly consider cache-bank access times during modular exponentiation, which makes it easier for local users to discover RSA keys by running a crafted application on the same Intel Sandy Bridge CPU core as a victim and leveraging cache-bank conflicts, aka a "CacheBleed" attack.

openssl · nodejs · debian · canonical