In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time.

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int() lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found by sashiko.dev [1]). Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)' block so that it is always freed by the __free cleanup callback. No functional change intended.

In Splunk Enterprise versions below 10.4.1, 10.2.5, 10.0.8, and 9.4.13, and Splunk Cloud Platform versions below 10.5.2605.0, 10.4.2604.6, 10.3.2512.15, 10.2.2510.18, and 10.1.2507.24, a low-privileged user that does not hold the 'admin' or 'power' Splunk roles could view stored credential hashes when they access the `/servicesNS/-/-/storage/passwords` REST endpoint through the `|rest` Search Processing Language (SPL) command.<br><br>The exposure happens because the `|rest` SPL command returns the `encr_password` field in the results of the `/servicesNS/-/-/storage/passwords` REST endpoint.

splunk

In Splunk Enterprise versions below 10.4.1, 10.2.5, 10.0.8, 9.4.13, and 9.3.14, and Splunk Cloud Platform versions below 10.5.2605.0, 10.4.2604.6, 10.2.2510.18, and 10.1.2507.24, a user who holds a role that contains the `edit_local_apps` and `install_apps` capabilities could cause a legitimate app installation to write files outside the intended app directory, into `$SPLUNK_HOME/etc/` and its subdirectories.<br><br>The vulnerability is caused by a path traversal in the app installation workflow, which does not restrict the installation path to the intended app directory.

splunk

In Splunk Enterprise versions below 10.4.1, 10.2.5, 10.0.8, and 9.4.13, and Splunk Cloud Platform versions below 10.5.2605.0, 10.4.2604.7, 10.3.2512.16, 10.2.2510.18, and 10.1.2507.24, an attacker could trick a user that holds a role with the `list_deployment_server` capability into running arbitrary Search Processing Language (SPL) searches on their behalf as `splunk-system-user`, allowing for access to stored credentials and indexed data.<br><br>The vulnerability is possible because Deployment Server endpoints in Splunk Web do not validate Cross-Site Request Forgery (CSRF) tokens on GET requests, and caller-supplied input is not correctly neutralized before it is placed into an SPL search.

splunk

In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] ....

linux

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture.

linux

IBM CICS Transaction Gateway for Multiplatforms 9.1, 9.2, 9.3, and 10.1 IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are affected by an HTTP request smuggling vulnerability.

ibm

In the Linux kernel, the following vulnerability has been resolved: platform/wmi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

linux

A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. WMCO establishes SSH connections to Windows worker nodes without verifying the remote server host key. An adjacent-network attacker who can intercept or redirect WMCO's SSH session can capture WICD and kubelet bootstrap credentials transferred during node configuration, enabling compromise of Windows node identities in the cluster.

redhat

A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. The WICD CSR auto-approver validates that a Certificate Signing Request contains the organization system:wicd-nodes but does not reject additional organization values such as system:masters. A compromised Windows worker node that holds WICD credentials can submit a CSR that is auto-approved and signed by the cluster, yielding a client certificate that grants cluster-administrator privileges and enabling full cluster takeover.

redhat

To allow builds of Python to be run from an in-tree layout (rather than an installed file layout), the VPATH variable is defined at build time and used to locate certain landmarks - specifically, Modules/setup.local. When this landmark is found relative to VPATH relative to the executable, Python assumes it is running in a source tree and generates a different default sys.path. This code remains in release builds, so that release-ready builds can be built in-tree. On Windows, since builds are written to 'PCbuild/', the value of VPATH is set to '..\..', which results in a landmark of '..\..\Modules\setup.local'. This path is outside the install directory of Python, and may have different permissions, potentially allowing a low-privilege user to create the landmark and an alternative `Lib` folder that will be discovered by an otherwise restricted install. Such a setup occurs with the legacy default install location for all users (in the now superseded EXE installer), due to how Windows allows all users to create folders in the root directory of their OS drive. Our recommended mitigation on Windows is to migrate away from the legacy installer and use the new [Python install manager](https://www.python.org/downloads/latest/pymanager/) to install for the current user. Installs where the directory two levels above the Python installation directory have equivalent permissions are unaffected (in general, a per-user install cannot be modified at all by other users, removing any escalation of privilege risk, and could be directly modified by a privileged user, making the potential tampering irrelevant). Alternative mitigations might include preemptively creating and restricting access to a `Modules` directory. Be aware that only 3.13 and 3.14 will receive updated legacy installers - earlier fixes are only provided as sources. Platforms other than Windows allow VPATH to be overridden, but as they don't usually use a separated directory in the build for binaries, are unlikely to have a landmark reference outside of the install directory. The landmark detection involving VPATH is a fallback for when a more specific landmark - .\pybuilddir.txt - is absent, and was included for compatibility. Future releases of Python will no longer include the fallback, and so builds will need to generate or preserve the pybuilddir.txt file in order to work in-tree. This landmark file has been generated on Windows since 3.11, and on other platforms for longer.

A vulnerability was found in hcengineering Huly Platform up to 0.7.0. Affected by this vulnerability is the function getAccountInfo of the file server/account/src/operations.ts of the component User Information Handler. The manipulation results in improper authorization. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in hcengineering Huly Platform up to 0.7.0. Affected is the function getMailboxSecret of the file server/account/src/operations.ts of the component RPC Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Capgo before 12.128.2 contains a denial of service vulnerability allowing attackers to register accounts using arbitrary email addresses without verification, then initiate deletion to lock emails in pending deletion state. Attackers can permanently lock legitimate users out of the platform for 30 days by exploiting unverified email ownership in account lifecycle operations.

Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.3, kitty's OSC 21 (color-control) query reply reflects attacker-controlled bytes, including newlines, into the shell's input without sanitization. Version 0.47.3 fixes the issue.

Kitty is a cross-platform GPU based terminal. In versions 0.47.0 and 0.47.1, `kitten dnd` can allow a malicious remote drag-and-drop source to overwrite or truncate arbitrary files writable by the local kitty user. Remote `text/uri-list` drops are staged in a temporary directory, but on case-sensitive filesystems duplicate remote basenames are not de-duplicated. An attacker can first create a staged symlink and then send a same-name regular-file entry. The regular-file write uses `utils.CreateAt()` / `openat(O_RDWR|O_CREAT|O_TRUNC)` without `O_NOFOLLOW`, so it follows the attacker-created symlink and writes outside the staging directory before final overwrite confirmation runs. This appears related in class to the file-transfer symlink advisory, but it is a different bug: it affects `kitten dnd` remote drag-and-drop staging, uses different vulnerable code (`kittens/dnd/drop.go` and `tools/utils/file_at_fd.go`), and reproduces on commit `4aa4a5c0567a92553a8c20a88a4352da637fca5d`, after the file-transfer `O_NOFOLLOW` fix. Version 0.47.2 patches the issue.

Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.4, 2026.3.0-latest to before 2026.3.1, and 2026.4.0-latest to before 2026.4.1, DetailedTagSerializer#tag_group_names returned every tag group a tag belonged to without filtering against the requesting user's visibility. With SiteSetting.tags_listed_by_group enabled, anonymous and unprivileged users hitting TagsController#info (which is exempt from requires_login) could read the names of tag groups restricted to specific user groups or non-visible categories. This issue has been patched in versions 2026.1.4, 2026.3.1, 2026.4.1, and 2026.5.0-latest.1.

Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.4, 2026.3.0-latest to before 2026.3.1, and 2026.4.0-latest to before 2026.4.1, the MessageBus.publish call for /web_hook_events/<id> in Jobs::RedeliverWebHookEvents did not pass group_ids, leaving the channel readable by any authenticated user (or anonymous user on instances where login_required is disabled). Webhook IDs are sequential integers and trivially enumerable. This issue has been patched in versions 2026.1.4, 2026.3.1, 2026.4.1, and 2026.5.0-latest.1.

Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.4, 2026.3.0-latest to before 2026.3.1, and 2026.4.0-latest to before 2026.4.1, a path traversal vulnerability in Discourse backup handling could allow an authenticated administrator on one site in a multisite deployment to access backup files belonging to another site when backups are stored locally. In affected configurations, an admin on Site A could potentially retrieve sensitive backup data from Site B (same host, multisite) by crafting a backup download request with a traversal payload. This issue has been patched in versions 2026.1.4, 2026.3.1, 2026.4.1, and 2026.5.0-latest.1.

Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.4, 2026.3.0-latest to before 2026.3.1, and 2026.4.0-latest to before 2026.4.1, four authorization/disclosure issues in the chat plugin (one also involving discourse-calendar): read-only category users could create chat threads, self-deleted chat messages could be restored by their author after channel access was revoked, moderators reviewing a flagged chat message were shown the channel's current last_message (often unrelated DM content), and calendar event payloads exposed the attached chat channel and its last message to viewers without chat access (including anonymous users). This affects sites with the chat plugin enabled; the calendar issue additionally requires discourse-calendar. This issue has been patched in versions 2026.1.4, 2026.3.1, 2026.4.1, and 2026.5.0-latest.1.