In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace.

Impact: @fastify/http-proxy versions from 9.4.0 up to and including 11.5.0 fail to validate the resolved WebSocket destination path against the configured rewrite prefix. The WebSocket routing path in WebSocketProxy.findUpstream resolves the destination via the WHATWG URL constructor, which collapses dot segments, so a crafted upgrade request with path traversal sequences can escape the rewrite prefix and reach upstream endpoints that were not meant to be exposed by the proxy. This is a variant of CVE-2021-21322 in a code path that never went through the HTTP fix in fastify/reply-from. Exploitation requires a non-normalizing WebSocket client, since browsers and the ws package normalize the request path before sending, but raw HTTP clients or downstream proxies that forward the request target unchanged make the attack reachable in production topologies. Patches: upgrade to @fastify/http-proxy 11.6.0. Workarounds: none.

fastify

The Grav API plugin (getgrav/grav-plugin-api) before 1.0.0-rc.16 accepts JWT access tokens through the ?token= URL query parameter on every API route (JwtAuthenticator::extractBearerToken fallback). Because tokens are embedded in URLs, they are logged verbatim in web server access logs, leaked via the Referer header, stored in browser history, and captured by upstream proxy and CDN logs, exposing valid admin access tokens. A leaked token grants unauthorized API access, including reading configuration and user data, creating admin accounts, modifying system settings, and deleting pages.

Stirling-PDF is a locally hosted web application that facilitates various operations on PDF files. Prior to 2.0.0, Stirling-PDF's /get-info-on-pdf endpoint rendered PDF Title and Author metadata fields without proper HTML encoding or sanitization, allowing a crafted PDF to execute attacker-controlled JavaScript in the browser of a user who views the resulting page. This issue is fixed in version 2.0.0.

stirling

Vitest is a testing framework powered by Vite. From 3.0.0 until 3.2.5, 4.1.8, and 5.0.0-beta.4, Vitest Browser Mode exposed a cdp() API that forwarded raw Chrome DevTools Protocol methods without being gated by allowWrite or allowExec, allowing a remote client with exposed browser API metadata to use CDP Page.setDownloadBehavior and Runtime.evaluate to overwrite vite.config.ts and execute attacker-controlled Node.js code. This issue is fixed in versions 3.2.5, 4.1.8, and 5.0.0-beta.

Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a high-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed.

adobe

Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed.

adobe

RabbitMQ is a messaging and streaming broker. Prior to 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the obsolete GET /api/auth endpoint can disclose the OAuth 2 client secret on RabbitMQ installations configured with management.oauth_client_secret, exposing credentials to unauthenticated callers when the management plugin and that OAuth configuration are enabled. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6.

broadcom

Jodit Editor is a WYSIWYG editor with a built-in file browser & image editor. In versions prior to 4.12.28, the built-in clean-html sanitizer can be bypassed by a MathML/<style> carrier that hides a dangerous element from the sanitizer's element walk, so a no-interaction event handler survives into the editor value, potentially causing Mutation XSS. When an application supplies attacker-influenced HTML to the editor's value-set or insertion paths, the sanitized output still contains a live <img ... onload=...> (or another non-onerror handler such as onfocus). A consumer that renders that output (element.innerHTML = editor.value) executes the handler with no user interaction. This issue has been fixed in version 4.12.28.

A flaw in AngularJS' Strict Contextual Escaping (SCE) logic allows bypassing certain SCE policies for resource URLs and can lead to arbitrary JavaScript execution within the context of the victim's browser session. SCE's purpose is to ensure that only trusted or safe values are used in certain security-sensitive contexts, such as resource URLs, including URLs that define executable JavaScript scripts, '<iframe>' documents, route templates, etc. A flaw in the logic that tries to match entire URLs against regular expression matchers can result in partial matches for certain types of regular expressions, effectively bypassing the policies and allowing the use of unsafe values as resource URLs. This issue affects AngularJS versions greater than or equal to 1.2.0-rc.3. Note: The AngularJS project was already End-of-Life when this CVE was published and will not receive any updates to address this issue. For more information see the  End-of-Life announcement https://docs.angularjs.org/misc/version-support-status .

Impact: When a user-configured proxy on webpack-dev-server has a broad context (e.g. /) and ws: true, it also intercepts the dev server's own HMR WebSocket and forwards it to the proxy target. This leaks the browser's cookies and Origin header to the backend, bypasses the dev server's Host/Origin validation, and corrupts the HMR socket (both HMR and the proxy end up writing to the same socket). Patches: Fixed in webpack-dev-server@5.2.5. Workarounds: Scope user-defined proxy context to specific paths instead of /, or omit ws: true from the proxy entry when WebSocket forwarding is not required.

Subscriber Broken Access Control in Really Simple SSL <= 9.5.9 versions.

WordPress Booking Calendar Contact Form 1.0.23 contains privilege escalation and stored cross-site scripting vulnerabilities that allow authenticated users to modify plugin options and inject malicious scripts by failing to verify user privileges and sanitize input parameters. Attackers with subscriber-level accounts can inject XSS payloads through parameters like price, name, calendar_language, and email_confirmation_to_user via admin-ajax.php and admin.php endpoints to execute arbitrary JavaScript in administrator browsers.

WordPress CP Polls 1.0.8 contains a persistent cross-site scripting vulnerability that allows attackers to inject malicious scripts through unsanitized file upload functionality. Attackers can upload files containing script payloads with event handlers like onerror attributes to execute arbitrary JavaScript in the browsers of users viewing the affected content.

The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains an incorrect authorization vulnerability in the WebSocket communication used by the SafeController WebMessageBroker. An authenticated attacker with valid low-privileged branch user credentials can manipulate WebSocket messages by specifying controller identifiers belonging to other branches. This allows the attacker to access restricted functions and resources in other branches, including activating boxes outside of the user's authorized branch.

LiamBindle MQTT-C through version 1.1.6 contains a heap-based out-of-bounds read and integer underflow in the mqtt_unpack_publish_response() function in src/mqtt.c that allows a remote unauthenticated attacker controlling an MQTT broker - or able to inject MQTT traffic into an unencrypted session - to crash a subscribed MQTT-C client and potentially disclose adjacent heap memory by sending a single crafted PUBLISH packet. The function validates only that the fixed-header remaining_length is at least 4, then reads the 16-bit topic_name_size field from the broker-controlled packet and advances the parse pointer by that value without verifying that topic_name_size plus the surrounding overhead fits within remaining_length; it subsequently computes application_message_size as remaining_length - topic_name_size - 2 (QoS 0) or - 4 (QoS greater than 0) in unsigned arithmetic, producing an integer underflow that is then passed to memmove(). A PUBLISH packet with topic_name_size = 0xFFFF and remaining_length = 7 advances the parse pointer 65535 bytes past the receive buffer (out-of-bounds read) and causes an application_message_size near 2^32, crashing the process when the resulting memmove() is executed.

OpenClaw before 2026.5.27 contains a state mutation vulnerability in node pairing reconnection that allows paired nodes to confuse approval scope decisions. Attackers can exploit reconnection logic to restore or present broader node authority than intended, potentially bypassing approval restrictions.

OpenClaw before 2026.5.12 contains an exec denylist bypass vulnerability in the bundle MCP loopback session-spawn path that allows authenticated callers to bypass intended command restrictions. Attackers can reach the affected bundled MCP session-spawn path to start sessions with broader command reach than intended.

A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger an out-of-bound write in the GPU user-space driver, leading to memory corruption and possible browser/GPU process crash. The software computes a required memory size from untrusted input, but integer overflow can produce a value smaller than needed. Subsequent write operations may then occur past the intended memory boundary, corrupting adjacent memory and causing process instability or termination.

MISP contains a reflected cross-site scripting vulnerability in the UiBeta event index view. The urlparams value is inserted into an inline JavaScript handler using HTML escaping inside a single-quoted JavaScript string. Because browsers HTML-decode attribute values before JavaScript parsing, a crafted searcheventinfo value can restore encoded quote characters and break out of the JavaScript string. An attacker could craft a malicious URL that, when opened by a victim using the UiBeta event index, executes arbitrary JavaScript in the victim’s browser in the context of the MISP instance. The issue is fixed by encoding the value as a JavaScript string literal with json_encode() before applying HTML escaping at the attribute layer.

A stored cross-site scripting vulnerability exists in MISP when the Overmind theme is used. The setHomePage endpoint previously saved the user-controlled path value through setSettingInternal(), bypassing the normal setSetting() validation logic, including validate_homepage, which requires homepage paths to start with /. As a result, an authenticated user could store an arbitrary homepage value, including an XSS payload. The stored value was later rendered in app/View/News/index.ctp as the href attribute of the “Continue to homepage” link without HTML escaping. This could allow execution of attacker-controlled JavaScript in the browser context of the affected MISP instance when the crafted homepage link is rendered and interacted with. The issue is fixed by always persisting the homepage setting through setSetting(), ensuring validation and access checks are applied, and by HTML-escaping the homepage value before rendering it in the news view.