Lack of user input validation in the file upload functionality of Open Notebook v1.8.3 allows the application user to access local files content from the docker container via path traversal.

lfnovo

Lack of user input validation in the file upload functionality of Open Notebook v1.8.3 allows the application user to create or modify files on the docker container via path traversal.

lfnovo

A vulnerability in the log file download functionality of Cisco Prime Infrastructure could allow an authenticated, remote attacker to download arbitrary log files from the server. This vulnerability is due to insufficient authorization checks on the download service API. An attacker could exploit this vulnerability by submitting a crafted URL request to an affected device. A successful exploit could allow the attacker to download sensitive log files that they would otherwise not have authorization to access. To exploit this vulnerability, the attacker must have valid credentials to access the web-based management interface of the affected device.

A weakness has been identified in FlowiseAI Flowise up to 3.0.12. Affected by this vulnerability is an unknown functionality of the component User Controller Handler. This manipulation of the argument userId/organizationId/workspaceId/email causes authorization bypass. The attack may be initiated remotely. The affected component should be upgraded.

flowiseai

HCL BigFix Service Management (SM) had directories that were not linked or publicly visible but could be accessed directly. This could allow an increased risk of information disclosure or misuse of sensitive functionality.

hcltech

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...

linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly.

linux

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

linux

The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'booking_form_page_url' parameter in all versions up to, and including, 5.5.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The malicious activity log entry is written to the database even when Stripe is not configured, because the latepoint_order_intent_created action hook fires before the Stripe Connect account ID is validated, meaning a fully functional Stripe integration is not required for exploitation.

CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary. An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name. This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only.

coredns.io

Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0.

traccar

Traccar is an open source GPS tracking system. In versions between 6.11.1 and 6.13.0, the CSV export functionality writes position data, including user-controlled device and computed attributes, to CSV output without proper escaping. An attacker can inject spreadsheet formulas through exported fields. When a manager or administrator opens the exported CSV file in spreadsheet software, this can cause formula execution and lead to command execution or data exfiltration. This has been patched in version 6.13.0.

traccar

OpenClaw versions 2026.4.10 before 2026.4.14 contain a missing authorization vulnerability in the Microsoft Teams SSO invoke handler that fails to apply sender allowlist checks. Attackers can bypass sender authorization by sending SSO invoke requests that are processed without proper validation, allowing unauthorized access to Teams SSO signin functionality.

openclaw

AmazCart CMS 3.4 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by submitting payloads through the search functionality. Attackers can enter script tags in the search box to execute arbitrary JavaScript that fires when search history is viewed or results are displayed.

Eclipse Equinox OSGi versions 3.8 through 3.18 contain a remote code execution vulnerability in the console interface that allows unauthenticated attackers to execute arbitrary code by exploiting the fork command functionality. Attackers can establish a telnet connection to the OSGi console, perform a telnet handshake, and send fork commands to download and execute malicious Java code, establishing a reverse shell connection.

The Schedule Post Changes With PublishPress Future plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'wrapper' attribute of the [futureaction] shortcode in all versions up to, and including, 4.10.0. This is due to insufficient input sanitization on the wrapper attribute. The plugin uses esc_html() to escape the value, but esc_html() only encodes HTML entities and does not prevent attribute injection when the value is used as an HTML tag name in a sprintf() call. An attacker can inject event handler attributes via spaces in the wrapper value. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Since it is also possible for administrators to make this functionality available to lower-privileged users, this introduces the possibility of abuse by contributors.

OpenSTAManager version 2.10 and earlier contains an arbitrary file upload vulnerability in the module update functionality (modules/aggiornamenti/upload_modules.php)

devcode

OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to version 7.0.0-rc3, the Script Runner widget allows users to execute Python and Ruby scripts directly from the openc3-COSMOS-script-runner-api container. Because all the docker containers share a network, users can execute specially crafted scripts to bypass the API permissions check and perform administrative actions, including reading and modifying data inside the Redis database, which can be used to read secrets and change COSMOS settings, as well as read and write to the buckets service, which holds configuration, log, and plugin files. These actions are normally only available from the Admin Console or with administrative privileges. Any user with permission to create and run scripts can connect to any service in the docker network. This issue has been patched in version 7.0.0-rc3.

openc3

OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. From version 6.7.0 to before version 7.0.0-rc3, a SQL injection vulnerability exists in the Time-Series Database (TSDB) component of COSMOS. The tsdb_lookup function in the cvt_model.rb file directly places user-supplied input into a SQL query without sanitizing the input. As a result, a user can break out of the initial SQL statement and execute arbitrary SQL commands, including deleting data. This issue has been patched in version 7.0.0-rc3.

openc3

OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to version 7.0.0, the Command Sender UI uses an unsafe eval() function on array-like command parameters, which allows a user-supplied payload to execute in the browser when sending a command. This creates a self-XSS risk because an attacker can trigger their own script execution in the victim’s session, if allowed to influence the array parameter input, for example via phishing. If successful, an attacker may read or modify data in the authenticated browser context, including session tokens in local storage. This issue has been patched in version 7.0.0.

openc3

OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to versions 6.10.5 and 7.0.0-rc3, OpenC3 COSMOS contains a design flaw in the save_tool_config() function that allows saving tool configuration files at arbitrary locations inside the shared /plugins directory tree by supplying crafted configuration filenames. Although the implementation sufficiently mitigates standard path traversal attacks, by canonicalizing filename to an absolute path, all plugins share this same root directory. That enables users to create arbitrary file structures and overwrite existing configuration files within the shared /plugins directory. This issue has been patched in versions 6.10.5 and 7.0.0-rc3.

openc3

OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to versions 6.10.5 and 7.0.0-rc3, the OpenC3 password change functionality allows a user to change their password without providing the old password, by accepting a valid session token instead. In assumed breach scenarios, this behaviour can be exploited by an attacker who has already obtained a valid session token, to gain persistence in hijacked account (including admin) and prevent legitimate users from accessing the account. This issue has been patched in versions 6.10.5 and 7.0.0-rc3.

openc3