Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check. Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated. Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING. IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4. Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).

e107 prior to version 2.3.8 contains a code execution vulnerability in the e_array deserialization handler that allows an attacker with out-of-band database write access to execute arbitrary PHP code by storing a crafted payload in the user_prefs column. The e_array::unserialize() function in e107_handlers/core_functions.php performs only a prefix check for the string 'array' before passing the stored value to eval(), causing automatic PHP execution whenever the affected user's preferences are materialized through e_user_pref::load().

CentreStack before 17.4 contains an XML external entity (XXE) injection vulnerability that allows unauthenticated attackers to exfiltrate arbitrary files by supplying a malicious URL to the SharePoint storage configuration handler. Attackers can send a crafted request to the unauthenticated StorageConfig endpoint causing the server to fetch and parse attacker-controlled XML containing external DTD references, resulting in out-of-band file exfiltration of sensitive files such as Web.config, which may contain database credentials and cryptographic key material.

Jinher OA C6 contains an XML External Entity (XXE) injection vulnerability in the /c6/JHSoft.Web.HrmAttendance/sp_manager_getUserlist.aspx/GetXmlHttp endpoint. An unauthenticated remote attacker can send a crafted XML payload to read arbitrary files from the server via an out-of-band attack.

The pglogical queue mechanism, used to convey out-of-band commands such as replicated DDL from a publisher to a subscriber, executes message payloads on the subscriber at the privilege level of the apply worker, which is equivalent to a PostgreSQL superuser in default installations. A party acting as the publisher can send crafted queue messages that cause arbitrary SQL to be executed on the subscriber as superuser, escalating from a role permitted to use pglogical to full superuser and breaking the isolation between tenants in shared deployments. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles.

Use of an insecure cryptographic algorithm in the cashless payment system using NFC wristbands from CasfID Servicios Tecnológicos S.L.U. (version used at Resurrection Fest 2025), which employs cards based on MIFARE Classic technology (FM11RF08S). The cryptographic weakness of the authentication algorithm allows an attacker to retrieve access keys using techniques known as Backdoored Nested Attack, read the wristband’s entire contents, and clone its credentials onto a compatible rewritable card. Exploitation of this vulnerability could enable the impersonation of other attendees, the fraudulent use of the balance associated with their wristbands, and financial losses for both the affected users and the event organizers.

The SMS Alert – SMS & OTP for WooCommerce, Order Notifications & Abandoned Cart Recovery plugin for WordPress is vulnerable to generic SQL Injection via 'checkout_payment_plans' and 'order_status' Settings in all versions up to, and including, 3.9.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order SQL injection: the malicious payload is stored in the 'checkout_payment_plans' and 'order_status' settings via update_option() and executed later when the cod_to_prepaid_cart_notification_sendsms_hook WP-Cron event fires SA_CodTOPrepaid::sendSms().

The SMS Alert – SMS & OTP for WooCommerce, Order Notifications & Abandoned Cart Recovery plugin for WordPress is vulnerable to generic SQL Injection via the 'id' parameter in all versions up to, and including, 3.9.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The SMS Alert – SMS & OTP for WooCommerce, Order Notifications & Abandoned Cart Recovery plugin for WordPress is vulnerable to time-based SQL Injection via the 'orderby' parameter in all versions up to, and including, 3.9.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The SMS Alert – SMS & OTP for WooCommerce, Order Notifications & Abandoned Cart Recovery plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in all versions up to, and including, 3.9.7 via the `billing_phone` parameter. This is due to the `processRegistration()` function using a phone-unbound `$_SESSION['sa_mobile_verified']` boolean flag as the sole gate before issuing an authentication cookie — the flag is set to `true` after any successful OTP validation without being bound to the specific phone number that was verified. This makes it possible for unauthenticated attackers to complete OTP verification for a phone number they control, then resubmit the registration request with a victim's `billing_phone` value to have `wp_set_auth_cookie()` called for the resolved victim account, enabling full authentication as any existing WordPress user whose registered phone number is known or guessable, including administrators.

Shop manager Cross Site Scripting (XSS) in Abandoned Cart Lite for WooCommerce <= 6.8.0 versions.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: bmg160: bail out when bandwidth/filter is not in table bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry matching the bw_bits value read from the chip: for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) { if (bmg160_samp_freq_table[i].bw_bits == bw_bits) break; } *val = bmg160_samp_freq_table[i].filter; If no entry matches, i ends up equal to the array size and the next line reads one slot past the end. bmg160_set_filter() has the same shape, driven by 'val' instead of bw_bits. smatch flags both: drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 Return -EINVAL when no entry matches. The set_filter() path is reachable from userspace via the sysfs in_anglvel_filter_low_pass_3db_frequency interface, so userspace can trivially trigger the out-of-bounds read with a value that is not in bmg160_samp_freq_table[].filter.

In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. Free the pages array after sg_alloc_table_from_pages() succeeds. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer.

Inefficient Algorithmic Complexity vulnerability in mtrudel bandit allows unauthenticated remote denial of service via CPU exhaustion during WebSocket fragment reassembly. The size guard 'Elixir.Bandit.WebSocket.Connection':oversize_message?/2 called from handle_frame/3 in lib/bandit/websocket/connection.ex appends each non-final continuation frame to a left-nested iolist and then re-measures the entire accumulated buffer with IO.iodata_length/1 on every frame. Because the buffer grows by one element per frame and is fully re-traversed each time, reassembly work is quadratic (O(n^2)) in the number of continuation frames. The max_fragmented_message_size limit (default 8 MB) bounds total bytes but not frame count, and each frame can carry as little as one payload byte, so an attacker can send millions of tiny continuation frames using modest bandwidth to pin a CPU core for minutes to hours. Many concurrent connections can starve the whole server of CPU, denying service to legitimate users. The WebSocket read timeout does not help, because it is an idle timeout evaluated between reads and cannot preempt the synchronous reassembly work spent inside a single callback. This issue affects bandit: from 1.11.0 before 1.12.1.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies.

BandiZip v.7.37 is affected by a Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass the Mark-of-the-Web protection mechanism on affected installations of BandiZip

Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected. This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core. Users are recommended to upgrade to version 1.4.0, which fixes the issue.

apache

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: bound node_desc sysfs read with %.64s node_desc[64] in struct ib_device is not guaranteed to be NUL- terminated. The core IB sysfs handler uses "%.64s" for exactly this reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store() performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL termination: memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX)); If exactly 64 bytes are written via the node_desc sysfs file, the array contains no NUL byte. The ionic hca_type_show() handler uses unbounded "%s" and will read past the end of node_desc into adjacent fields of struct ib_device until it encounters a NUL. ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by userspace. Match the core handler and bound the format specifier.

linux

jadx is a Dex to Java decompiler. Prior to 1.5.6, jadx-gui is affected by an HTML injection vulnerability in the Summary tab because SummaryNode.java appends arches and perArchCount values derived from .so file path components inside an APK into an HTML panel without escaping. A malicious APK with an HTML URL-encoded ZIP entry name can force rendering of arbitrary HTML, perform out-of-band requests, disclose the victim IP address, or interact with locally exposed applications. This issue is fixed in version 1.5.6.

jadx_project