In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix data races on ring->ready On weakly-ordered architectures, the store to fiq->ops can be reordered past the store to ring->ready, allowing a CPU that sees ring->ready == true via fuse_uring_ready() to dispatch requests through a stale fiq->ops pointer. Upgrade the store to smp_store_release() and the load in fuse_uring_ready() to smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...) is visible to any CPU that observes ring->ready == true. Additionally, fuse_uring_do_register() publishes ring->ready with WRITE_ONCE() but the fast-path check reads it with a plain load. This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in READ_ONCE() to mark it without adding unnecessary ordering. Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to prevent the compiler from reloading it between the NULL check and the dereference.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: drain bus_reset work on device removal brcmf_fw_crashed() and the debugfs "reset" entry both schedule drvr->bus_reset, whose callback recovers drvr through container_of() and dereferences it. The removal path frees drvr (brcmf_free -> wiphy_free) without draining the work, so a bus_reset callback pending or running during removal can outlive drvr. Cancellation cannot live in brcmf_detach() or brcmf_free(): the work callback reaches teardown through the bus .reset op (PCIe brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset -> brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for the running work and deadlock. Add a per-bus mutex (bus_reset_lock) and route all arming through brcmf_bus_schedule_reset(), which under the lock skips when the bus is marked removing. Each bus remove entry calls brcmf_bus_cancel_reset_work(), which under the same lock sets removing and cancels the work. Holding the mutex across cancel_work_sync() makes the set-removing + drain step atomic. Every producer reaches the arming path from process context -- the PCIe firmware-halt notification runs in the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail path runs from the data workqueue -- so the mutex is taken only in sleepable contexts. Where applicable the remove entry first stops the firmware-crash producer: on PCIe mask the mailbox and synchronize_irq; on SDIO unregister the bus interrupt and cancel the data worker, which also reports firmware halts through brcmf_fw_crashed(). The mutex is initialized at bus allocation. The SDIO suspend power-off path frees drvr through the same brcmf_sdiod_remove() and takes the same lock; resume re-allows the work only on a successful re-probe. Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire before brcmf_attach() wires up drvr, and it dereferences drvr (bphy_err/brcmf_dev_coredump) before reaching the arming gate. The bus_reset work is shared across buses, so the drain is applied to every remove path: PCIe (the .reset op introduced by the Fixes commit), SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the debugfs "reset" entry). cancel_work_sync() drains a running or pending bus_reset work item before removal frees drvr, and patch 1/2 makes the scratch-buffer release safe when reset teardown has already released those DMA buffers. This patch fixes the lifetime of the bus_reset work item itself. It does not attempt to address the separate, pre-existing lifetime of the asynchronous firmware completion started by the PCIe reset path. That callback needs its own lifetime/ownership protocol and is being tracked separately. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: cancel pending IN work before freeing the midi object The f_midi driver embeds a work item (midi->work) whose handler, f_midi_in_work(), dereferences the enclosing struct f_midi through container_of(). This work is armed from two sites: f_midi_complete(), on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA rawmidi output-stream start. Neither f_midi_disable() nor f_midi_unbind() cancels midi->work. f_midi_disable() only disables the endpoints and drains the in_req_fifo; it does not synchronize the work item, and the sound card is released asynchronously to the final free of the midi object. The midi object is reference-counted (midi->free_ref) and is freed in f_midi_free() only once both the usb_function reference and the rawmidi private_data reference have been dropped. In f_midi_unbind(), f_midi_disable() runs before the sound card is released, so while the USB endpoints are already disabled the rawmidi device is still usable by an open substream. A concurrent userspace write on such a substream can reach f_midi_in_trigger() and queue midi->work again after f_midi_disable() has returned. A work item armed this way may still be pending when the last reference drops and f_midi_free() proceeds to kfree(midi), letting f_midi_in_work() dereference the struct after it has been freed, a use-after-free. For this reason cancelling midi->work in f_midi_disable() would not be sufficient: the ALSA trigger path can rearm the work after disable() returns. Cancelling at the refcount-zero free site is the boundary after which neither arming source can survive, because by then both references that keep the midi object alive have been dropped: the USB endpoints are already disabled and the rawmidi device has been released. Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero block of f_midi_free(), before the embedded work_struct is freed along with the rest of the structure. opts->lock is a sleeping mutex, so calling cancel_work_sync() under it is permitted, and the handler takes midi->transmit_lock rather than opts->lock, so no self-deadlock can occur while it waits for a running instance of the work to finish. This issue was found by an in-house static analysis tool.

The JWT authentication mechanism accepts tokens signed with algorithms other than those explicitly configured or supported. This allows an attacker to craft a JWT with an unsupported algorithm, which is then incorrectly validated, leading to unauthorized access. Successful exploitation of this vulnerability may result in unauthorized access to the system, including the potential compromise of administrative accounts and full account takeover. The CVSS score is adjusted to 9.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) in single-tenant deployments, reflecting that the impact is contained within a single security authority boundary.

Tokens issued to a low-privileged user are not sufficiently restricted, allowing them to be used to access product-level Admin REST APIs. Exploitation of this vulnerability allows a low-privileged user to invoke the Admin REST APIs of WSO2 products, potentially leading to full administrative account takeover. This requires the attacker to already possess a low-privileged user account and be able to obtain a valid token for it.

The PDF creation feature of Foxit PDF Services API supports referencing external files. Although local file access is restricted, an attacker could trigger an SSRF vulnerability by using URL redirection to bypass validation, leading to information disclosure.

When an Event Publisher output adapter is configured with irrelevant properties, the affected products log these properties. This logging occurs without sufficient validation or sanitization of the property values. A malicious actor with access to the 'wso2carbon' log files could retrieve sensitive information, such as user credentials or other confidential data, that was inadvertently logged due to misconfiguration, potentially leading to unauthorized access.

The Conditional Authentication (Adaptive Authentication) script does not correctly enforce the completion of all required authentication steps when a specific multi-step pattern involving certain authenticators is configured. This allows an attacker to bypass intermediate authentication challenges by exploiting how the script handles callbacks and re-execution of authentication steps. Successful exploitation allows a malicious actor to gain unauthorized access to a targeted user account. This vulnerability can only be exploited when all of the following conditions are met: the application login flow contains a specific secondary authenticator, the Conditional Authentication script is configured with particular event callbacks and re-executes an authentication step, the targeted user has one of the impacted authenticators enrolled, and the attacker successfully completes any preceding authentication steps.

The Secret Type Management REST API does not correctly isolate access controls when deleting a secret type. The on-delete cascade logic, when triggered, fails to enforce organizational boundaries, leading to the removal of secrets associated with that type across all organizations. Exploitation of this vulnerability can result in the unintended deletion of secrets across the entire deployment, potentially causing configuration failures, service interruptions, and a denial-of-service condition. This vulnerability requires delete permissions for the Secret Type Management REST API, which are by default only granted to administrators.

The system accepts authentication requests without sufficient validation to enforce tenant isolation when using Email OTP, SMS OTP, or Magic Link as first-factor authenticators. This failure to adequately separate user data between tenants can lead to the exposure of personally identifiable information. Successful exploitation allows an attacker to disclose personally identifiable information of users in different tenants, resulting in privacy violations and potential regulatory non-compliance. This may include unauthorized access to user details such as mobile numbers.

When Multi-Attribute Login is enabled, the login interface fails to consistently mask the existence of user accounts. For valid users, the server resolves and displays their canonical username, while for non-existent users, it echoes the original input. This occurs regardless of the validate_username configuration. The discovery of valid usernames can increase the risk of brute force attacks, social engineering attacks, and targeted information leakage. Attackers can leverage this information to craft more effective phishing campaigns or social engineering tactics to compromise user accounts or extract sensitive data.

The Ajax processor within the Carbon console fails to adequately protect state-changing operations from Cross-Site Request Forgery (CSRF) attacks. Specifically, it utilizes the HTTP GET method for these operations, and while the SameSite=Lax cookie attribute is employed for mitigation, this mechanism is bypassed as it permits cookies to be sent with cross-origin top-level navigation requests, including GET requests. This allows an attacker to trick an authenticated user's browser into unknowingly executing unintended actions. An attacker can exploit this vulnerability to perform unauthorized state-altering requests on behalf of authenticated users. This could lead to consequences such as data modification, account changes, or other actions that could result in data compromise or loss of user control over their account. However, this attack is only feasible if the Carbon console and related services are exposed to the public internet, which is not recommended according to WSO2's security guidelines.

The user impersonation flow in WSO2 Identity Server fails to properly manage refresh tokens associated with impersonated sessions. This allows an attacker who has obtained an access token for an impersonated user to leverage the refresh token grant to obtain new access tokens, extending their ability to act as the legitimate user. An attacker who gains access to an impersonated user's access token can exploit this weakness to renew their authorization. This results in the continued ability to perform actions on behalf of the actual user, compromising log integrity and traceability by masking the true actor.

When secondary user stores are configured, the implicit-association resolver incorrectly initializes from a secondary user store and bypasses the primary user store during search and uniqueness checks. This allows a subject to be associated with an unintended local account if the same lookup claim (e.g., username or email) exists in both the primary and a secondary store. If duplicate claim values exist across user stores, this issue can lead to identity confusion due to incorrect implicit associations when using an external Identity Provider (IDP). Legitimate user accounts in the primary user store may fail to associate correctly with their corresponding external IDP accounts, potentially restricting access if the secondary account has fewer privileges. Deployments are not affected if no secondary user stores are configured, implicit association is disabled, or claim values are globally unique.

Unused authorization codes issued to deleted users are not being properly invalidated or removed from the system. This allows for the persistence of these codes, enabling them to be potentially reused. If an attacker possesses both the authorization code and the associated client credentials (client ID and client secret), they can leverage these unused codes to obtain access tokens on behalf of users who have already been deleted. This may lead to unauthorized access to sensitive resources and services, contingent on the scopes originally authorized for the compromised authorization code.

The account locking mechanism fails to trigger when secondary user stores are inaccessible. The software does not maintain a consistent state for account locking if it cannot reach all configured user stores, allowing an attacker to repeatedly attempt authentication with invalid credentials without triggering the lockout mechanism for users within active stores. When the account locking mechanism is bypassed due to the inaccessibility of secondary user stores, users in accessible user stores are left vulnerable to brute force attacks. A malicious actor can exploit this by attempting numerous invalid password combinations against a user account without the expected account lockout consequence.

A flaw was found in the SAML broker component of Keycloak, an identity and access management solution. When configured as a SAML broker using the IdP-Initiated flow, Keycloak fails to enforce the OneTimeUse condition in SAML assertions. This allows an attacker who captures a valid, unused assertion to replay it multiple times. Successful exploitation could allow an attacker to hijack a user's session and gain unauthorized access to the system as that user.

The TranslatePress – Translate Multilingual sites with AI Translation plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content (URL-encoded gettext markers) in all versions up to, and including, 3.2.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Comment moderation may delay exploitation for first-time commenters, but does not prevent it, as the payload uses only WordPress-permitted tags and attributes with percent-encoded characters that pass wp_kses URL validation unmodified.

The Slider, Gallery, and Carousel by MetaSlider – Image Slider, Video Slider plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'delay' Post Meta Setting in all versions up to, and including, 3.111.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with custom-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The ml-slider custom post type is registered without custom capability restrictions and the ml-slider_settings meta key is unprotected, allowing Author-level users to set the malicious delay value via XML-RPC custom_fields when creating an ml-slider post.

The Checkimate — WooCommerce Checkout, Abandoned Cart Recovery & Order Bumps WordPress plugin through 1.0.13 does not properly restrict access to its license-management functionality, relying on a shared secret computed entirely from publicly available information, allowing unauthenticated attackers to deactivate the Checkimate — WooCommerce Checkout, Abandoned Cart Recovery & Order Bumps WordPress plugin through 1.0.13's premium licensing state and erase the stored license key.

The PeproDev WooCommerce Receipt Uploader WordPress plugin through 2.8.0 does not verify that a requested attachment belongs to the order referenced by its access token, allowing unauthenticated attackers to forge a token and disclose image attachments, including other customers' uploaded payment receipts, that they do not own.

The tourmaster WordPress plugin before 5.4.9 writes its order/booking export to a fixed, predictable file inside its publicly accessible directory with no access control, allowing unauthenticated users to download the exported customers' personal information once an administrator has run an export.