In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/

linux

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again.

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups().

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: always drain queued discard work in ext4_mb_release() While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c.

linux

Before Airflow 3.2.0, it was unclear that secure Airflow deployments require the Deployment Manager to take appropriate actions and pay attention to security details and security model of Airflow. Some assumptions the Deployment Manager could make were not clear or explicit enough, even though Airflow's intentions and security model of Airflow did not suggest different assumptions. The overall security model [1], workload isolation [2], and JWT authentication details [3] are now described in more detail. Users concerned with role isolation and following the Airflow security model of Airflow are advised to upgrade to Airflow 3.2, where several security improvements have been implemented. They should also read and follow the relevant documents to make sure that their deployment is secure enough. It also clarifies that the Deployment Manager is ultimately responsible for securing your Airflow deployment. This had also been communicated via Airflow 3.2.0 Blog announcement [4]. [1] Security Model: https://airflow.apache.org/docs/apache-airflow/stable/security/jwt_token_authentication.html [2] Workload isolation: https://airflow.apache.org/docs/apache-airflow/stable/security/workload.html [3] JWT Token authentication: https://airflow.apache.org/docs/apache-airflow/stable/security/jwt_token_authentication.html [4] Airflow 3.2.0 Blog announcement: https://airflow.apache.org/blog/airflow-3.2.0/ Users are recommended to upgrade to version 3.2.0, which fixes this issue.

apache

When user logged out, the JWT token the user had authtenticated with was not invalidated, which could lead to reuse of that token in case it was intercepted. In Airflow 3.2 we implemented the mechanism that implements token invalidation at logout. Users who are concerned about the logout scenario and possibility of intercepting the tokens, should upgrade to Airflow 3.2+ Users are recommended to upgrade to version 3.2.0, which fixes this issue.

apache

Astro is a web framework. From version 2.10.10 to before version 5.18.1, this issue concerns Astro's remotePatterns path enforcement for remote URLs used by server-side fetchers such as the image optimization endpoint. The path matching logic for /* wildcards is unanchored, so a pathname that contains the allowed prefix later in the path can still match. As a result, an attacker can fetch paths outside the intended allowlisted prefix on an otherwise allowed host. This issue has been patched in version 5.18.1.

astro

Vikunja is an open-source self-hosted task management platform. Starting in version 0.8 and prior to version 2.2.0, unauthenticated users are able to bypass the application's built-in rate-limits by spoofing the `X-Forwarded-For` or `X-Real-IP` headers due to the rate-limit relying on the value of `(echo.Context).RealIP`. Unauthenticated users can abuse endpoints available to them for different potential impacts. The immediate concern would be brute-forcing usernames or specific accounts' passwords. This bypass allows unlimited requests against unauthenticated endpoints. Version 2.2.0 patches the issue.

vikunja

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a library-level vulnerability was identified in the Authlib Python library concerning the validation of OpenID Connect (OIDC) ID Tokens. Specifically, the internal hash verification logic (_verify_hash) responsible for validating the at_hash (Access Token Hash) and c_hash (Authorization Code Hash) claims exhibits a fail-open behavior when encountering an unsupported or unknown cryptographic algorithm. This flaw allows an attacker to bypass mandatory integrity protections by supplying a forged ID Token with a deliberately unrecognized alg header parameter. The library intercepts the unsupported state and silently returns True (validation passed), inherently violating fundamental cryptographic design principles and direct OIDC specifications. This issue has been patched in version 1.6.9.

authlib

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a cryptographic padding oracle vulnerability was identified in the Authlib Python library concerning the implementation of the JSON Web Encryption (JWE) RSA1_5 key management algorithm. Authlib registers RSA1_5 in its default algorithm registry without requiring explicit opt-in, and actively destroys the constant-time Bleichenbacher mitigation that the underlying cryptography library implements correctly. This issue has been patched in version 1.6.9.

authlib

HCL AION is affected by a vulnerability where model packaging and distribution mechanisms may not include sufficient authenticity verification. This may allow the possibility of unverified or modified model artifacts being used, potentially leading to integrity concerns or unintended behaviour.

hcltech

PublicCMS v5.202506.d and earlier is vulnerable to stored XSS. Uploaded PDFs can contain JavaScript payloads and bypass PDF security checks in the backend CmsFileUtils.java. If a user uploads a PDF file containing a malicious payload to the system and views it, the embedded JavaScript payload can be triggered, resulting in issues such as credential theft, arbitrary API execution, and other security concerns. This vulnerability affects all file upload endpoint, including /cmsTemplate/save, /file/doUpload, /cmsTemplate/doUpload, /file/doBatchUpload, /cmsWebFile/doUpload, etc.

publiccms

Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, an improper authorization check in the topic management logic allows authenticated users to modify privileged attributes of their topics. By manipulating specific parameters in a PUT or POST request, a regular user can elevate a topic’s status to a site-wide notice or banner, bypassing intended administrative restrictions. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. There are no practical workarounds to prevent this behavior other than applying the security patch. Administrators concerned about unauthorized promotions should audit recent changes to site banners and global notices until the fix is deployed.

discourse

The Pelco, Inc. Sarix Professional 3 Series Cameras are vulnerable to an authentication bypass issue in their web management interface. The flaw stems from inadequate enforcement of access controls, allowing certain functionality to be accessed without proper authentication. This weakness can lead to unauthorized viewing of live video streams, creating privacy concerns and operational risks for organizations relying on these cameras. Additionally, it may expose operators to regulatory and compliance challenges.

Rejected reason: GitHub cannot issue a CVE for this Security Advisory because this advisory includes information about more than one vulnerability. According to [rule 4.2.11 of the CVE CNA rules](https://www.cve.org/ResourcesSupport/AllResources/CNARules#section_4-2_CVE_ID_Assignment): > 4.2.6 CNAs SHOULD assign different CVE IDs to separate Vulnerabilities, as determined using the guidance in [4.1](https://www.cve.org/ResourcesSupport/AllResources/CNARules#section_4-1_Vulnerability_Determination). > 4.2.11 CNAs SHOULD assign different CVE IDs to different, Independently Fixable Vulnerabilities. You can move forward in one of two ways: - If you agree that this Security Advisory concerns more than one independently fixable vulnerability, split each vulnerability into its own advisory and request one CVE for each vulnerability. - If you do not agree that these vulnerabilities are independently fixable, resubmit the CVE request with a section clarifying how they are dependent and should have the same CVE. Thank you for making the open source ecosystem more secure by fixing and responsibly disclosing these vulnerabilities.

In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages.

linux

The Report Builder component of the application stores user input directly in a web page and displays it to other users, which raised concerns about a possible Cross-Site Scripting (XSS) attack. Proper management of this functionality helps ensure a secure and seamless user experience.  Although the user input is not validated in the report creation, these scripts are not executed when the report is run by end users. The script is executed when the report is modified through the report builder by a user with edit permissions. The Report Builder is part of the WebConsole.  The WebConsole package is currently end of life, and is no longer maintained. We strongly recommend against installing or using it in any production environment. However, if you choose to install it, for example, to access functionality like the Report Builder, it must be deployed within a fully isolated network that has no access to sensitive data or internet connectivity. This is a critical security precaution, as the retired package may contain unpatched vulnerabilities and is no longer supported with updates or fixes.

commvault · microsoft · linux

In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page).

In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Clean up integer overflow checking in map_user_pages() The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning: workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0 ... RIP: 0010:__queue_work+0x875/0xaf0 ... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88 RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2 R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000 R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0 FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0 Call Trace: <IRQ> ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... The following diagram reveals the cause of the above warning: CPU 0 (remove) | CPU 1 (delayed work callback) mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAF The above scenario actually constitutes a UAF vulnerability. The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled. Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated. A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-swit ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. [hverkuil: fix typo in Subject: tunner -> tuner]