Cypress Solutions CTM-200/CTM-ONE 1.3.6 contains hard-coded credentials vulnerability in Linux distribution that exposes root access. Attackers can exploit the static 'Chameleon' password to gain remote root access via Telnet or SSH on affected devices.

A state machine transition flaw in the Bluetooth Low Energy (BLE) stack of Cypress PSoC4 v3.66 allows attackers to bypass the pairing process and authentication via a crafted pairing_failed packet.

Certain Cypress (and Broadcom) Wireless Combo chips such as CYW43455, when a 2021-01-26 Bluetooth firmware update is not present, allow a Bluetooth outage via a "Spectra" attack.

Certain Cypress (and Broadcom) Wireless Combo chips, when a January 2021 firmware update is not present, allow inferences about memory content via a "Spectra" attack.

Certain Cypress (and Broadcom) Wireless Combo chips, when a January 2021 firmware update is not present, allow memory read access via a "Spectra" attack.

Certain Cypress (and Broadcom) Wireless Combo chips, when a January 2021 firmware update is not present, allow memory access via a "Spectra" attack.

An issue in the Bluetooth Low Energy implementation of Cypress Bluetooth SDK v3.66 allows attackers to cause a Denial of Service (DoS) via supplying a crafted LL_PAUSE_ENC_REQ packet.

Cypress Solutions CTM-200 v2.7.1.5600 and below was discovered to contain an OS command injection vulnerability via the cli_text parameter.

cypress

cypress-image-snapshot shows visual regressions in Cypress with jest-image-snapshot. Prior to version 8.0.2, it's possible for a user to pass a relative file path for the snapshot name and reach outside of the project directory into the machine running the test. This issue has been patched in version 8.0.2.

simonsmith

Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is lower_transport_layer_on_seg. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered by sending a series of segmented packets with inconsistent SegN.

infineon

Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is pb_transport_handle_frag_. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered during mesh provisioning. Because there is no check for mismatched SegN and TotalLength in Transaction Start PDU.

infineon

The Bluetooth Classic implementation in the Cypress WICED BT stack through 2.9.0 for CYW20735B1 devices does not properly handle the reception of LMP_max_slot with a greater ACL Length after completion of the LMP setup procedure, allowing attackers in radio range to trigger a denial of service (firmware crash) via a crafted LMP packet.

cypress

The Bluetooth Classic implementation in the Cypress WICED BT stack through 2.9.0 for CYW20735B1 does not properly handle the reception of a malformed LMP timing accuracy response followed by multiple reconnections to the link slave, allowing attackers to exhaust device BT resources and eventually trigger a crash via multiple attempts of sending a crafted LMP timing accuracy response followed by a sudden reconnection with a random BDAddress.

cypress

The Bluetooth Classic implementation in the Cypress CYW920735Q60EVB does not properly handle the reception of continuous unsolicited LMP responses, allowing attackers in radio range to trigger a denial of service and restart (crash) of the device by flooding it with LMP_AU_Rand packets after the paging procedure.

cypress

The Bluetooth Classic implementation in the Cypress WICED BT stack through 2.9.0 for CYW20735B1 devices does not properly handle the reception of LMP_max_slot with an invalid Baseband packet type (and LT_ADDRESS and LT_ADDR) after completion of the LMP setup procedure, allowing attackers in radio range to trigger a denial of service (firmware crash) via a crafted LMP packet.

cypress

On the Cypress CYW20735 evaluation board, any data that exceeds 384 bytes is copied and causes an overflow. This is because the maximum BLOC buffer size for sending and receiving data is set to 384 bytes, but everything else is still configured to the usual size of 1092 (which was used for everything in the previous CYW20719 and later CYW20819 evaluation board). To trigger the overflow, an attacker can either send packets over the air or as unprivileged local user. Over the air, the minimal PoC is sending "l2ping -s 600" to the target address prior to any pairing. Locally, the buffer overflow is immediately triggered by opening an ACL or SCO connection to a headset. This occurs because, in WICED Studio 6.2 and 6.4, BT_ACL_HOST_TO_DEVICE_DEFAULT_SIZE and BT_ACL_DEVICE_TO_HOST_DEFAULT_SIZE are set to 384.

cypress

The Bluetooth Low Energy implementation in Cypress PSoC Creator BLE 4.2 component versions before 3.64 generates a random number (Pairing Random) with significantly less entropy than the specified 128 bits during BLE pairing. This is the case for both authenticated and unauthenticated pairing with both LE Secure Connections as well as LE Legacy Pairing. A predictable or brute-forceable random number allows an attacker (in radio range) to perform a MITM attack during BLE pairing.

cypress

An issue was discovered in Cypress (formerly Broadcom) WICED Studio 6.2 CYW20735B1 and CYW20819A1. As a Bluetooth Low Energy (BLE) packet is received, it is copied into a Heap (ThreadX Block) buffer. The buffer allocated in dhmulp_getRxBuffer is four bytes too small to hold the maximum of 255 bytes plus headers. It is possible to corrupt a pointer in the linked list holding the free buffers of the g_mm_BLEDeviceToHostPool Block pool. This pointer can be fully controlled by overflowing with 3 bytes of packet data and the first byte of the packet CRC checksum. The checksum can be freely chosen by adapting the packet data accordingly. An attacker might be able to allocate the overwritten address as a receive buffer resulting in a write-what-where condition. This is fixed in BT SDK2.4 and BT SDK2.45.

cypress

The Bluetooth Low Energy implementation in Cypress PSoC 4 BLE component 3.61 and earlier processes data channel frames with a payload length larger than the configured link layer maximum RX payload size, which allows attackers (in radio range) to cause a denial of service (crash) via a crafted BLE Link Layer frame.

cypress

The Bluetooth Low Energy (BLE) stack implementation on Cypress PSoC 4 through 3.62 devices does not properly restrict the BLE Link Layer header and executes certain memory contents upon receiving a packet with a Link Layer ID (LLID) equal to zero. This allows attackers within radio range to cause deadlocks, cause anomalous behavior in the BLE state machine, or trigger a buffer overflow via a crafted BLE Link Layer frame.

cypress

An issue was discovered in the Bluetooth component of the Cypress (formerly owned by Broadcom) Wireless IoT codebase. Extended Inquiry Responses (EIRs) are improperly handled, which causes a heap-based buffer overflow during device inquiry. This overflow can be used to overwrite existing functions with arbitrary code. The Reserved for Future Use (RFU) bits are not discarded by eir_handleRx(), and are included in an EIR's length. Therefore, one can exceed the expected 240 bytes, which leads to a heap-based buffer overflow in eir_getReceivedEIR() called by bthci_event_SendInquiryResultEvent(). In order to exploit this bug, an attacker must repeatedly connect to the victim's device in a short amount of time from different source addresses. This will cause the victim's Bluetooth stack to resolve the device names and therefore allocate buffers with attacker-controlled data. Due to the heap corruption, the name will be eventually written to an attacker-controlled location, leading to a write-what-where condition.

google

Blipcare Wifi blood pressure monitor BP700 10.1 devices allow memory corruption that results in Denial of Service. When connected to the "Blip" open wireless connection provided by the device, if a large string is sent as a part of the HTTP request in any part of the HTTP headers, the device could become completely unresponsive. Presumably this happens as the memory footprint provided to this device is very small. According to the specs from Rezolt, the Wi-Fi module only has 256k of memory. As a result, an incorrect string copy operation using either memcpy, strcpy, or any of their other variants could result in filling up the memory space allocated to the function executing and this would result in memory corruption. To test the theory, one can modify the demo application provided by the Cypress WICED SDK and introduce an incorrect "memcpy" operation and use the compiled application on the evaluation board provided by Cypress semiconductors with exactly the same Wi-Fi SOC. The results were identical where the device would completely stop responding to any of the ping or web requests.

blipcare