355,769
Total CVEs
25,065
Critical
81,857
High
1,609
CISA KEV
113
This Week
24 results · Page 1/1
In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function.
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode PCIe endpoints with ATS enabled and passed through to userspace (e.g., QEMU, DPDK) can hard-lock the host when their link drops, either by surprise removal or by a link fault. Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") adds pci_dev_is_disconnected() to devtlb_invalidation_with_pasid() so ATS invalidation is skipped only when the device is being safely removed, but it applies only when Intel IOMMU scalable mode is enabled. With scalable mode disabled or unsupported, a system hard-lock occurs when a PCIe endpoint's link drops because the Intel IOMMU waits indefinitely for an ATS invalidation that cannot complete. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist Commit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release") adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(), which calls qi_flush_dev_iotlb() and can also hard-lock the system when a PCIe endpoint's link drops. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 intel_context_flush_no_pasid device_pasid_table_teardown pci_pasid_table_teardown pci_for_each_dma_alias intel_pasid_teardown_sm_context intel_iommu_release_device iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist Sometimes the endpoint loses connection without a link-down event (e.g., due to a link fault); killing the process (virsh destroy) then hard-locks the host. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput pci_dev_is_disconnected() only covers safe-removal paths; pci_device_is_present() tests accessibility by reading vendor/device IDs and internally calls pci_dev_is_disconnected(). On a ConnectX-5 (8 GT/s, x2) this costs ~70 µs. Since __context_flush_dev_iotlb() is only called on {attach,release}_dev paths (not hot), add pci_device_is_present() there to skip inaccessible devices and avoid the hard-lock.
linux
