An incorrect authorization vulnerability in MISP allows an organization administrator to target site administrator accounts belonging to the same organization through the administrative email functionality. The affected code restricted organization administrators to users within their own organization, but did not exclude accounts assigned a site administrator role from recipient queries. As a result, an organization administrator could perform privileged account-management actions, such as initiating a password reset workflow, against a higher-privileged site administrator account in the same organization. Successful exploitation may allow an authenticated organization administrator to interfere with or potentially take over a site administrator account, resulting in privilege escalation and full compromise of the MISP instance’s confidentiality, integrity, and availability. Attack prerequisites: The attacker must be authenticated as an organization administrator in the same organization as a site administrator account.

In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)

linux

In Apache Iceberg, the table's metadata files are control files: they tell readers which data files belong to the table and which table version to read. `write.metadata.path` is an optional table property that tells Polaris where to write those metadata files. For a table already registered in a Polaris-managed catalog, changing only that property through an `ALTER TABLE`-style settings change (not a row-level `INSERT`, `SELECT`, `UPDATE`, or `DELETE`) bypasses the commit-time branch that is supposed to revalidate storage locations. The full persisted / credential-vending variant requires the affected catalog to have `polaris.config.allow.unstructured.table.location=true`, with `allowedLocations` broad enough to include the attacker-chosen target. `allowedLocations` is the admin-configured allowlist of storage paths that the catalog is allowed to use. Public project materials suggest that this flag is a real supported compatibility / layout mode, not just a contrived lab-only prerequisite. In that configuration, a user who can change table settings can cause Apache Polaris itself to write new table metadata to an attacker-chosen reachable storage location before the intended location-validation branch runs. If the later concrete-path validation also accepts that location, Polaris persists the resulting metadata path into stored table state. Later table-load and credential APIs can then return temporary cloud-storage credentials for the same location without revalidating it. In plain terms, Polaris can later hand out temporary storage access for the same attacker-chosen area. That attacker-chosen area does not need to be limited to the poisoned table's own files. If it is a broader storage prefix, another table's prefix, or, depending on configuration or provider behavior, even a bucket/container root, the resulting disclosure or corruption scope can extend to any data and metadata Polaris can reach there. The practical consequences are therefore similar to the staged-create credential-vending issue already discussed: data and metadata reachable in that storage scope can be exposed and, if write-capable credentials are later issued, modified, corrupted, or removed. Even before that later credential step, Polaris itself performs the metadata write to the unchecked location. So the core issue is not only later credential vending. The primary defect is that Polaris skips its intended location checks before performing a security- sensitive metadata write when only `write.metadata.path` changes. When `polaris.config.allow.unstructured.table.location=false`, current code review suggests the later `updateTableLike(...)` validation usually rejects out-of-tree metadata locations before the unsafe path is persisted. That may reduce the persisted / credential-vending variant, but it does not prevent the underlying defect: Polaris still skips the intended pre-write location check when only `write.metadata.path` changes.

apache

Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy.   Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration.                                                                                                                                                                         Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue.

apache

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to modify file attributes outside the configured chroot directory. The SFTP daemon (ssh_sftpd) stores the raw, user-supplied path in file handles instead of the chroot-resolved path. When SSH_FXP_FSETSTAT is issued on such a handle, file attributes (permissions, ownership, timestamps) are modified on the real filesystem path, bypassing the root directory boundary entirely. Any authenticated SFTP user on a server configured with the root option can modify file attributes of files outside the intended chroot boundary. The prerequisite is that a target file must exist on the real filesystem at the same relative path. Note that this vulnerability only allows modification of file attributes; file contents cannot be read or altered through this attack vector. If the SSH daemon runs as root, this enables direct privilege escalation: an attacker can set the setuid bit on any binary, change ownership of sensitive files, or make system configuration world-writable. This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:do_open/4 and ssh_sftpd:handle_op/4. This issue affects OTP from OTP 17.0 before OTP 28.4.3, OTP 27.3.4.11 and OTP 26.2.5.20, corresponding to ssh from 3.0.1 before 5.5.3, 5.2.11.7 and 5.1.4.15.

erlang

The Everest Forms plugin for WordPress is vulnerable to Arbitrary File Read and Deletion in all versions up to, and including, 3.4.4. This is due to the plugin trusting attacker-controlled old_files data from public form submissions as legitimate server-side upload state, and converting attacker-supplied URLs into local filesystem paths using regex-based string replacement without canonicalization or directory boundary enforcement. This makes it possible for unauthenticated attackers to read arbitrary local files (e.g., wp-config.php) by injecting path-traversal payloads into the old_files upload field parameter, which are then attached to notification emails. The same path resolution is also used in the post-email cleanup routine, which calls unlink() on the resolved path, resulting in the targeted file being deleted after being attached. This can lead to full site compromise through disclosure of database credentials and authentication salts from wp-config.php, and denial of service through deletion of critical files. Prerequisite: The form must contain a file-upload or image-upload field, and disable storing entry information.

Affected Products and Versions * Apache Druid * Affected Versions: 0.17.0 through 35.x (all versions prior to 36.0.0) * Prerequisites: * druid-basic-security extension enabled * LDAP authenticator configured * Underlying LDAP server permits anonymous bind                                                                                                                                                    Vulnerability Description An authentication bypass vulnerability exists in Apache Druid when using the druid-basic-security extension with LDAP authentication. If the underlying LDAP server is configured to allow anonymous binds, an attacker can bypass authentication by providing an existing username with an empty password. This allows unauthorized access to otherwise restricted Druid resources without valid credentials. The vulnerability stems from improper validation of LDAP authentication responses when anonymous binds are permitted, effectively treating anonymous bind success as valid user authentication. Impact A remote, unauthenticated attacker can: * Gain unauthorized access to the Apache Druid cluster * Access sensitive data stored in Druid datasources * Execute queries and potentially manipulate data * Access administrative interfaces if the bypassed account has elevated privileges * Completely compromise the confidentiality, integrity, and availability of the Druid deployment                                                                                                                                                                                     Mitigation   Immediate Mitigation (No Druid Upgrade Required):                                                                                                                                                   * Disable anonymous bind on your LDAP server. This prevents the vulnerability from being exploitable and is the recommended immediate action. Resolution * Upgrade Apache Druid to version 36.0.0 or later, which includes fixes to properly reject anonymous LDAP bind attempts.

apache

Improper access control in the TeamViewer Full and Host clients (Windows, macOS, Linux) prior version 15.74.5 allows an authenticated user to bypass additional access controls with “Allow after confirmation” configuration in a remote session. An exploit could result in unauthorized access prior to local confirmation. The user needs to be authenticated for the remote session via ID/password, Session Link, or Easy Access as a prerequisite to exploit this vulnerability.

n8n is an open source workflow automation platform. Prior to versions 1.123.12 and 2.4.0, when workflows process uploaded files and transfer them to remote servers via the SSH node without validating their metadata the vulnerability can lead to files being written to unintended locations on those remote systems potentially leading to remote code execution on those systems. As a prerequisites an unauthenticated attacker needs knowledge of such workflows existing and the endpoints for file uploads need to be unauthenticated. This issue has been patched in versions 1.123.12 and 2.4.0.

n8n

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing The hp_populate_*_elements_from_package() functions in the hp-bioscfg driver contain out-of-bounds array access vulnerabilities. These functions parse ACPI packages into internal data structures using a for loop with index variable 'elem' that iterates through enum_obj/integer_obj/order_obj/password_obj/string_obj arrays. When processing multi-element fields like PREREQUISITES and ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array elements using expressions like 'enum_obj[elem + reqs]' and 'enum_obj[elem + pos_values]' within nested loops. The bug is that the bounds check only validated elem, but did not consider the additional offset when accessing elem + reqs or elem + pos_values. The fix changes the bounds check to validate the actual accessed index.

linux

Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specific evervault domain names, following from our ACME challenge based TLS certificate acquisition pipeline. The vulnerability primarily affects applications which only check PCR8. Though the efficacy is also reduced for applications that check all PCR values, the impact is largely remediated by checking PCR 0, 1 and 2. The identified issue has been addressed in version 1.3.2 by validating attestation documents before storing in the cache, and replacing the naive equality checks with a new SatisfiedBy check. Those who useevervault-go to attest Enclaves that are hosted outside of Evervault environments and cannot upgrade have two possible workarounds available. Modify the application logic to fail verification if PCR8 is not explicitly present and non-empty and/or add custom pre-validation to reject documents that omit any required PCRs.

evervault

Http4s is a Scala interface for HTTP services. In versions from 1.0.0-M1 to before 1.0.0-M45 and before 0.23.31, http4s is vulnerable to HTTP Request Smuggling due to improper handling of HTTP trailer section. This vulnerability could enable attackers to bypass front-end servers security controls, launch targeted attacks against active users, and poison web caches. A pre-requisite for exploitation involves the web application being deployed behind a reverse-proxy that forwards trailer headers. This issue has been patched in versions 1.0.0-M45 and 0.23.31.

typelevel

Fides is an open-source privacy engineering platform. Prior to version 2.69.1, admin UI user password changes in Fides do not invalidate active user sessions, creating a vulnerability chaining opportunity where attackers who have obtained session tokens through other attack vectors (such as XSS) can maintain access even after password reset. This issue is not directly exploitable on its own and requires a prerequisite vulnerability to obtain valid session tokens in the first place. Version 2.69.1 fixes the issue. No known workarounds are available.

ethyca

A vulnerability in the meeting-join functionality of Cisco Webex Meetings could have allowed an unauthenticated, network-proximate attacker to complete a meeting-join process in place of an intended targeted user, provided the requisite conditions were satisfied. Cisco has addressed this vulnerability in the Cisco Webex Meetings service, and no customer action is needed. This vulnerability existed due to client certificate validation issues. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by monitoring local wireless or adjacent networks for client-join requests and attempting to interrupt and complete the meeting-join flow as another user who was currently joining a meeting. To successfully exploit the vulnerability, an attacker would need the capability to position themselves in a local wireless or adjacent network, to monitor and intercept the targeted network traffic flows, and to satisfy timing requirements in order to interrupt the meeting-join flow and exploit the vulnerability. A successful exploit could have allowed the attacker to join the meeting as another user. However, the Cisco Product Security Incident Response Team (PSIRT) is not aware of any malicious use of the vulnerability that is described in this advisory.

CVE-2025-49084 is a vulnerability in the management console of Absolute Secure Access prior to version 13.56. Attackers with administrative access can overwrite policy rules without the requisite permissions. The attack complexity is low, attack requirements are present, privileges required are high and no user interaction is required. There is no impact to confidentiality, the impact to integrity is low, and there is no impact to availability. The impact to confidentiality and availability of subsequent systems is high and the impact to the integrity of subsequent systems is low.

absolute

An open redirect vulnerability has been identified in Grafana OSS organization switching functionality. Prerequisites for exploitation: - Multiple organizations must exist in the Grafana instance - Victim must be on a different organization than the one specified in the URL

A vulnerability classified as critical was found in Webkul QloApps 1.6.1. Affected by this vulnerability is an unknown functionality of the file /admin/ajax_products_list.php. The manipulation of the argument packItself leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor confirms the existence of this flaw but considers it a low-level issue due to admin privilege pre-requisites. Still, a fix is planned for a future release.

webkul

Graylog is a free and open log management platform. Prior to versions 6.0.14, 6.1.10, and 6.2.0, it is possible to obtain user session cookies by submitting an HTML form as part of an Event Definition Remediation Step field. For this attack to succeed, the attacker needs a user account with permissions to create event definitions, while the user must have permissions to view alerts. Additionally, an active Input must be present on the Graylog server that is capable of receiving form data (e.g. a HTTP input, TCP raw or syslog etc). Versions 6.0.14, 6.1.10, and 6.2.0 fix the issue. No known workarounds are available, as long as the relatively rare prerequisites are met.

graylog

The Buddypress Force Password Change plugin for WordPress is vulnerable to authenticated account takeover due to the plugin not properly validating a user's identity prior to updating their password through the 'bp_force_password_ajax' function in all versions up to, and including, 0.1. This makes it possible for authenticated attackers, with subscriber-level access and above and under certain prerequisites, to change arbitrary user's passwords, including administrators, and leverage that to gain access to their accounts.

Under specific conditions and prerequisites, an unauthenticated attacker could access customer coupon codes exposed in the URL parameters of the Coupon Campaign URL in SAP Commerce. This could allow the attacker to use the disclosed coupon code, hence posing a low impact on confidentiality and integrity of the application.

After attempting to upload a file that does not meet prerequisites, GMOD Apollo will respond with local path information disclosure

The WP ALL Export Pro plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.9.1 via the custom export fields. This is due to the missing input validation and sanitization of user-supplied data. This makes it possible for unauthenticated attackers to inject arbitrary PHP code into form fields that get executed on the server during the export, potentially leading to a complete site compromise. As a prerequisite, the custom export field should include fields containing user-supplied data.

soflyy

Open source machine learning framework. A vulnerability has been identified in Rasa that enables an attacker who has the ability to load a maliciously crafted model remotely into a Rasa instance to achieve Remote Code Execution. The prerequisites for this are: 1. The HTTP API must be enabled on the Rasa instance eg with `--enable-api`. This is not the default configuration. 2. For unauthenticated RCE to be exploitable, the user must not have configured any authentication or other security controls recommended in our documentation. 3. For authenticated RCE, the attacker must posses a valid authentication token or JWT to interact with the Rasa API. This issue has been addressed in rasa version 3.6.21 and all users are advised to upgrade. Users unable to upgrade should ensure that they require authentication and that only trusted users are given access.