Mautic's getLeadIdsByFieldValueAction (LeadBundle/Controller/AjaxController.php) reads a field parameter from the request, sanitizes it only with InputHelper::clean() (which HTML-entity-encodes quotes and angle brackets but does not restrict other characters), and passes it into LeadRepository::buildQueryForGetLeadsByFieldValue() where it is concatenated directly as a raw SQL column identifier ($col = 'l.'.$field) rather than being validated against a whitelist of real column names or passed as a bound parameter. Since Doctrine cannot parameterize identifiers, and the sanitizer does not block spaces, parentheses, or other SQL-relevant characters, an attacker can inject SQL via the field name itself. The action requires only a valid session (any authenticated user), unlike sibling actions in the same controller that carry additional permission checks.

In the Linux kernel, the following vulnerability has been resolved: nexthop: initialize extack in nh_res_bucket_migrate() nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to call_nexthop_res_bucket_notifiers(). When nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns -ENOMEM), the error is propagated back before any notifier sets extack._msg, and the error path formats the stale pointer with pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE this dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access in range [...] RIP: 0010:string (lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) _printk (kernel/printk/printk.c:2504) nh_res_bucket_migrate (net/ipv4/nexthop.c:1816) nh_res_table_upkeep (net/ipv4/nexthop.c:1866) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) netlink_sendmsg (net/netlink/af_netlink.c:1900) Kernel panic - not syncing: Fatal exception Zero-initialize extack so _msg is NULL on error paths that never set it.

In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does.

H3C Magic BE18000 V200R007, H3C NX400 V100R015, H3C Magic NX30 Pro V100R0011, H3C Magic R3010 V100R009, H3C Magic NX15 V100R017, H3C Magic R1510 V100R016, H3C NE36 Pro V100R002 and H3C MC102G HM1A0V200R010 contain multiple command injection vulnerabilities in the /api/esps request handler. The affected object interfaces and methods are esps.dhcpd.vlan (getlist, delete), esps.filter.url (add, modify), esps.apcm.version (delete, H3C Magic NX15 only), esps.swcm.version (delete, upgrade, all affected models except H3C Magic NX15), and esps.system.ntp (set, all affected models except H3C Magic NX15). Attacker-controlled request parameters are incorporated into shell expressions executed by eval without adequate validation, allowing a remote attacker to execute arbitrary commands as root and gain complete control of the affected device.

In the Linux kernel, the following vulnerability has been resolved: rhashtable: clear stale iter->p on table restart rhashtable_walk_start_check() has two restart paths when resuming a walk. When iter->walker.tbl is valid, it re-validates iter->p against the table and sets iter->p = NULL if the object is gone. When iter->walker.tbl is NULL (table was freed during resize), it resets slot and skip but forgets to clear iter->p. rhashtable_walk_next() then dereferences the stale iter->p, reading freed memory. This is a use-after-free. Any caller that does multi-fragment rhashtable walks across walk_stop/walk_start boundaries is affected. Concrete cases include netlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC (tipc_nl_sk_walk in net/tipc/socket.c). Crash stack (netlink_diag): BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0 Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080) Call Trace: rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016) __netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122) netlink_diag_dump+0xc2/0x240 netlink_dump+0x5bc/0x1270 netlink_recvmsg+0x7a3/0x980 sock_recvmsg+0x1bc/0x200 __sys_recvfrom+0x1d4/0x2c0

OpenRemote (org.openremote:openremote) versions <= 1.26.2 contain an insecure direct object reference vulnerability in the setAssetLinks endpoint of AlarmResourceImpl. The realm access check validates only a single realm obtained via realms.stream().findFirst() on a HashSet of realms from the request, rather than all realms. Because HashSet iteration order is non-deterministic, an authenticated attacker who includes alarm-asset links from both their own realm and a victim realm can, with roughly 50% probability per request (retryable), persist cross-tenant links and disclose victim asset names (returned via @Formula fields) through GET requests on the attacker's own alarm. Fixed in 1.27.0.

In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B.

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).

In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.

In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set.

An issue in xiandafu beetl 3.20.2 allows a remote attacker to execute arbitrary code via the type.new function and the property reflection mechanism

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu().

In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series.

In the Linux kernel, the following vulnerability has been resolved: ovpn: fix race between deleting interface and adding new peer While deleting an existing ovpn interface, there is a very narrow window where adding a new peer via netlink may cause the netdevice to hang and prevent its unregistration. It may happen during ovpn_dellink(), when all existing peers are freed and the device is queued for deregistration, but a CMD_PEER_NEW message comes in adding a new peer that takes again a reference to the netdev. At this point there is no way to release the device because we are under the assumption that all peers were already released. Fix the race condition by releasing all peers in ndo_uninit(), when the netdevice has already been removed from the netdev list. Also ovpn_peer_add() has now an extra check that forces the function to bail out if the device reg_state is not REGISTERED. This way any incoming CMD_PEER_NEW racing with the interface deletion routine will simply stop before adding the peer. Note that the above check happens while holding the netdev_lock to prevent racing netdev state changes. ovpn_dellink() is now empty and can be removed.

In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries).

In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc.

In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: add hook transactions for device deletions Restore the flag that indicates that the hook is going away, ie. NFT_HOOK_REMOVE, but add a new transaction object to track deletion of hooks without altering the basechain/flowtable hook_list during the preparation phase. The existing approach that moves the hook from the basechain/flowtable hook_list to transaction hook_list breaks netlink dump path readers of this RCU-protected list. It should be possible use an array for nft_trans_hook to store the deleted hooks to compact the representation but I am not expecting many hook object, specially now that wildcard support for devices is in place. Note that the nft_trans_chain_hooks() list contains a list of struct nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE. Note that new commands can be updated to use nft_trans_hook for consistency. This patch also adapts the event notification path to deal with the list of hook transactions.

In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK.