FreeRDP Windows client before 3.29.0 contains a heap buffer overflow vulnerability in the clipboard virtual channel when processing CLIPRDR_FILE_CONTENTS_RESPONSE PDUs without validating the server-provided size against the destination buffer. A malicious RDP server can send a response with a data payload significantly larger than requested, causing arbitrary heap memory corruption that may enable remote code execution when a user performs a paste operation.

FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails. Attackers can send malformed smartcard IRP requests with non-zero cReaders and truncated reader-state data to crash the process via null pointer access in free_reader_states functions.

FreeRDP before 3.29.0 contains a reachable assertion (WINPR_ASSERT(OutputBufferLength == BytesReturned)) in serial_process_irp_device_control() in channels/serial/client/serial_main.c. When serial device redirection is enabled and a server-controlled IRP_MJ_DEVICE_CONTROL request specifies an unsupported IOCTL with a non-zero OutputBufferLength, CommDeviceIoControl() can fail with BytesReturned = 0, causing the mismatch to trigger the assertion and abort the client process (denial of service).

FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains a divide-by-zero vulnerability in the rdpecam camera redirection client. ecam_dev_process_start_streams_request() parses a server-controlled CAM_MEDIA_TYPE_DESCRIPTION from a StartStreamsRequest PDU but validates only Format and Flags, not FrameRateDenominator. When a malicious or compromised RDP server sends a StartStreamsRequest with FrameRateDenominator set to zero, ecam_encoder_context_init() (channels/rdpecam/client/encoding.c) computes FrameRateNumerator / FrameRateDenominator, causing an integer division by zero (SIGFPE) and termination of the FreeRDP client process. Camera redirection must be enabled on the client for the channel to be reachable. Fixed in FreeRDP 3.29.0.

FreeRDP before 3.29.0 contains out-of-bounds read vulnerabilities in the async update message proxy for the PolygonSC and PolygonCB primary drawing orders. When AsyncUpdate is enabled (e.g., xfreerdp /async-update), update_message_PolygonSC() and update_message_PolygonCB() allocate a fresh points array but copy point data from the address of the order structure instead of from polygonSC->points / polygonCB->points, resulting in a client-side out-of-bounds read. A malicious or compromised RDP server sending crafted PolygonSC/PolygonCB update orders can trigger memory disclosure or a client crash.

FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash.

FreeRDP before 3.29.0 contains a client-side heap use-after-free in the async update message proxy for WINDOW_ICON_ORDER when AsyncUpdate is enabled (e.g. xfreerdp /async-update). In update_message_WindowIcon() a shallow CopyMemory() overwrites a freshly allocated lParam->iconInfo with the parser-owned windowIcon->iconInfo pointer. After the parser callback returns, update_recv_window_info_order() frees window_icon.iconInfo, but the queued async message still retains and later dispatches that stale pointer. A malicious or compromised RDP server sending a crafted RAIL Window Alternate Secondary Order with WINDOW_ORDER_ICON can trigger use-after-free, leading to memory corruption and client crash.

FreeRDP versions 3.28.0 and earlier contain a heap buffer overflow in the server-side RAIL channel handler (rail_server_handle_messages() in channels/rail/server/rail_main.c). When processing a RAIL PDU header, the code subtracts RAIL_PDU_HEADER_LENGTH from the peer-controlled orderLength field without first verifying orderLength is at least the header length. For orderLength values 0..3 this causes an unsigned integer underflow to a very large size, which bypasses the Stream_EnsureRemainingCapacity() capacity check (due to pointer arithmetic wraparound) and is then passed to WTSVirtualChannelRead(), resulting in an out-of-bounds heap write. A malicious or compromised RDP client can exploit this to corrupt the heap and crash the server. Fixed in FreeRDP 3.29.0.

FreeRDP before 3.29.0 fails to enforce the RESPONSE_SIZE_LIMIT when processing Transfer-Encoding: chunked HTTP responses in http_response_recv_body(). Attackers controlling a malicious RD Gateway endpoint can send oversized chunked response bodies to exhaust client memory resources without triggering the configured size limit.

FreeRDP before 3.29.0 contains a denial of service vulnerability in the RDPEI server channel handler that fails to validate maximum PDU body length before stream allocation. A malicious RDP client can send a header-only RDPEI message with a large declared body length to force excessive memory allocation on the server.

FreeRDP before 3.29.0 fails to properly validate server-supplied RDPDR paths in drive redirection, allowing attackers to access prefix-sibling paths outside the configured shared root. A malicious RDP server can read, write, delete, and enumerate files in sibling directories by sending non-rooted paths that bypass the shared-root boundary check.

FreeRDP before 3.29.0 improperly validates the Extended Key Usage (EKU) purpose of the peer certificate during client-side server TLS authentication. In x509_utils_verify(), when server-purpose (X509_PURPOSE_SSL_SERVER) verification fails, the code falls back to client-purpose and any-purpose verification, so a trusted, hostname-matching certificate valid only for clientAuth can be accepted as the RDP server certificate. In environments relying on EKU separation between client and server certificates, this allows a clientAuth-only certificate issued by a trusted CA to bypass server certificate purpose validation.

FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains an improper certificate hostname validation vulnerability. The TLS hostname matcher (tls_match_hostname() in libfreerdp/crypto/tls.c) treats a wildcard pattern such as *.example.com as matching any hostname ending in .example.com, so it incorrectly accepts a wildcard certificate for multi-label subdomains like a.b.example.com (which OpenSSL's X509_check_host() rejects). This weakens TLS server authentication under wildcard-certificate conditions.

FreeRDP before 3.29.0 contains a buffer over-disclosure vulnerability in the gateway WebSocket transport (libfreerdp/core/gateway/websocket.c). The client's Pong reply reuses a fixed 1024-byte response stream whose length is not sealed to the actual received Ping payload, so a malicious gateway/WebSocket peer sending a non-empty Ping control frame causes the client to reply with an overlong Pong that discloses bytes beyond the received payload (the peer receives the masking key and can unmask the reply). A zero-length Ping reaches an assertion and terminates the client (denial of service).

FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains a heap out-of-bounds read in update_process_glyph_fragments()/glyph_cache_fragment_put() in libfreerdp/cache/glyph.c. When handling a GLYPH_FRAGMENT_ADD update, the code reads a one-byte server-controlled declared fragment size but does not verify it fits within the remaining received buffer before allocating and copying that many bytes. A malicious RDP server can send a short fragment with an oversized declared size, causing the client to read beyond the allocated buffer, resulting in an out-of-bounds read and client crash.

FreeRDP before 3.29.0 contains a heap out-of-bounds read vulnerability in the TSMF FFmpeg decoder when parsing AVC1 MPEG2VIDEOINFO media types with insufficient ExtraData. Attackers can send malformed media format data from a server to trigger a crash by reading fixed offsets without validating source buffer length.

FreeRDP before 3.29.0 (affected versions <= 3.28.0) does not validate CRLF and control characters in the server-controlled RDP redirection TargetNetAddress field. This value is copied into the client's ServerHostname and, when the client connects through an HTTP proxy, is written directly into the proxy CONNECT request line and Host header by http_proxy_connect() without filtering. A malicious or compromised RDP server can send a crafted redirection PDU containing embedded control characters to inject arbitrary headers/requests into the HTTP proxy CONNECT request.

FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard cache request decoders that accept NULL NDR pointers for LookupName in SCARD_IOCTL_READCACHEA and SCARD_IOCTL_WRITECACHEA operations. When smartcard emulation is enabled, attackers can send crafted smartcard cache requests with NULL lookup-name pointers to trigger strlen() on a null pointer, causing client process termination.

FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains multiple TLS certificate identity validation weaknesses in tls_verify_certificate(), tls_match_hostname(), and x509_utils_get_dns_names(). Because FreeRDP performs custom Common Name and DNS SAN string matching instead of using OpenSSL's length-aware identity validation APIs, it (1) truncates DNS SAN values at embedded NUL bytes (accepting e.g. 'victim.example\0.attacker.example' as 'victim.example'), (2) accepts a matching Common Name even when non-matching DNS SAN entries are present, and (3) accepts IP-literal targets via DNS/CN matching without comparing iPAddress SANs. Under a trusted or misissued certificate chain, an attacker positioned to present such a certificate can bypass server identity verification, weakening TLS server authentication.

FreeRDP before 3.29.0 contains an out-of-bounds heap read vulnerability in the UVC H.264 extension-unit parser that fails to validate descriptor length before accessing the GUID field. A local attacker with a malicious USB video camera can trigger a heap read beyond allocated bounds during camera stream setup, causing denial of service.

FreeRDP before 3.28.0 treats lines beginning with forward slash in RDP files as raw command-line options, exposing the entire CLI parser surface to untrusted files. Attackers can craft malicious RDP files with /rdp2tcp, /cert:ignore, or /drive options to execute arbitrary commands, bypass certificate validation, or expose local filesystems without user interaction.

freerdp

FreeRDP before 3.28.0 (affected 3.x through 3.27.1) contains a double-free vulnerability in freerdp_client_rdp_file_apply_to_settings() (client/common/file.c) when parsing the selectedmonitors field of a .rdp connection file. The MonitorIds array is allocated through the settings object, and a raw non-owning pointer to it is freed on the strtoul error path without clearing settings->MonitorIds, leaving it dangling; at teardown freerdp_settings_free() frees the same buffer again. An attacker who convinces a victim to open a crafted .rdp file with oversized monitor tokens can trigger a size-controlled double-free in any FreeRDP CLI client (xfreerdp/sdl-freerdp/wlfreerdp) in the default configuration.

freerdp