Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. hackney_h3:await_response_loop/6 accumulates the HTTP/3 response body in memory without any size cap. The after Timeout clause is a per-message inactivity timer that resets on every received chunk, housekeeping message, or settings frame — it is not a wall-clock deadline. A malicious HTTP/3 server that emits one small chunk every Timeout - 1 ms with Fin = false and never sends a final frame keeps the loop alive indefinitely while the accumulation buffer grows linearly without bound, eventually exhausting the BEAM process heap and causing an out-of-memory condition. This issue affects hackney: from 2.0.0 before 4.0.1.

benoitc

Interpretation Conflict vulnerability in benoitc hackney allows Server Side Request Forgery. hackney_url:normalize/2 URL-decodes the host component after the URL has been parsed into a #hackney_url{} record. OTP's uri_string:parse/1 and inet:parse_address/1 do not decode percent-escapes in the host, so a URL such as http://%31%32%37%2E%30%2E%30%2E%31/ is seen by a caller's allowlist validator with host %31%32%37%2E%30%2E%30%2E%31 (not an IP address), which passes the allowlist check. hackney's normalizer then decodes the host to 127.0.0.1 and opens a TCP connection to loopback. Because hackney:request/5 always calls hackney_url:normalize/2 with no opt-out, every request that takes a binary or list URL is affected. The same technique reaches cloud instance metadata services (169.254.169.254), RFC1918 networks, and any admin interface listening on localhost. This issue affects hackney: from 0.13.0 before 4.0.1.

benoitc

Improper Neutralization of CRLF Sequences vulnerability in benoitc hackney allows HTTP Request Splitting. hackney does not percent-encode carriage return (\r) or line feed (\n) characters in the URL query component before constructing the HTTP/1.1 request target. Characters outside the grammar defined in RFC 3986 Section 3.4 must be percent-encoded, but hackney_url:make_url/3 passes the query binary directly without validation or escaping. An attacker who can control all or part of a URL passed to hackney can inject raw CRLF sequences into the query string, which are then sent as HTTP line breaks in the request target. This enables injection of arbitrary HTTP headers or splitting of the HTTP request. This issue affects hackney: from 0.13.1 before 4.0.1.

benoitc

Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The WebSocket client in src/hackney_ws.erl imposes no upper bound on memory consumption in three code paths. First, read_handshake_response/3 accumulates received bytes into a growing buffer with no size cap; the per-receive timeout resets on every chunk, so a server that streams bytes without ever sending \r\n\r\n causes the buffer to grow until memory is exhausted. Second, parse_payload/9 and parse_active_payload/8 do not validate the declared frame payload length against any limit; because RFC 6455 allows payload lengths up to 2^63-1 bytes, a server that announces a very large frame and dribbles bytes causes the accumulation buffer to grow until OOM. Third, the frag_buffer field in #ws_data{} accumulates continuation frames indefinitely; a server that sends an endless stream of non-final (nofin) fragmented frames without ever sending a final (fin) frame grows frag_buffer without bound. In all three cases the attacker only needs to control the WebSocket server the hackney client connects to, with no authentication or special client configuration required. This issue affects hackney: from 2.0.0 before 4.0.1.

benoitc

Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in benoitc hackney allows HTTP Request/Response Splitting. The WebSocket upgrade code in src/hackney_ws.erl copies the host, path, headers (ExtraHeaders), and protocols options from the caller-supplied opts map into the internal #ws_data{} record in init/1 and then splices them verbatim into the raw HTTP/1.1 upgrade request by binary concatenation in do_handshake/1. No CRLF or NUL stripping is performed at any of these four injection sites. An attacker who controls any of these options — for example by forwarding URL components or header values from untrusted input into hackney_ws:start_link/1 — can inject arbitrary HTTP headers into the outbound WebSocket upgrade request, leading to header injection, credential spoofing toward the upstream server, log and cache poisoning, or request smuggling via intermediary proxies. This issue affects hackney: from 2.0.0 before 4.0.1.

benoitc

Uncontrolled Resource Consumption vulnerability in benoitc hackney allows Flooding. The SOCKS5 transport in src/hackney_socks5.erl correctly applies the caller-supplied timeout to the SOCKS5 negotiation phase, but then upgrades the connection to TLS using the two-argument form ssl:connect/2, which defaults to an infinite timeout. The Timeout value is in scope at the call site but is not forwarded. A hostile SOCKS5 proxy that completes the SOCKS5 handshake normally and then goes silent (or sends a partial TLS ServerHello and stalls) will cause the connecting process to block indefinitely, regardless of the connect_timeout or recv_timeout options supplied by the caller. This issue affects hackney: from 0.10.0 before 4.0.1.

benoitc

Sensitive Data Exposure vulnerability in benoitc hackney allows Retrieve Embedded Sensitive Data. The HTTP/3 redirect handler in src/hackney_h3.erl passes the original request headers unchanged to the redirect target without performing any cross-origin check. When a client issues an HTTP/3 request with follow_redirect enabled and includes Authorization or Cookie headers, a server responding with a 3xx redirect to a different host will cause the client to forward those credentials verbatim to the new origin. The main hackney.erl module has maybe_strip_auth_on_redirect/2 (guarded by the location_trusted option) to address CVE-2018-1000007, but hackney_h3.erl is missing this protection entirely. This issue affects hackney: from 3.1.1 before 4.0.1.

benoitc

Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in benoitc hackney allows HTTP Response Splitting. The hackney_cookie:setcookie/3 function in src/hackney_cookie.erl validates the Name and Value arguments against CRLF and control characters, but concatenates the domain and path options verbatim into the output iolist with no equivalent check. An attacker who controls either option — for example by supplying a Host header value forwarded as the cookie domain, or a request path forwarded as the cookie path — can inject a literal CRLF sequence and arbitrary additional Set-Cookie headers into the HTTP response. This issue affects hackney: from 0.9.0 before 4.0.1.

benoitc

Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The URL parser in src/hackney_url.erl converts every unrecognized URL scheme to a permanent BEAM atom via binary_to_atom/2. BEAM atoms are never garbage-collected and the atom table defaults to a hard limit of 1,048,576 entries. An attacker who can supply URLs with attacker-chosen scheme prefixes — directly as request targets, as configured webhook URLs, or via Location headers followed during redirects — can exhaust the atom table and crash the entire BEAM VM with system_limit. This issue affects hackney: from 2.0.0 before 4.0.1.

benoitc

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in benoitc hackney allows Excessive Allocation. The Alt-Svc response header parser in src/hackney_altsvc.erl does not guarantee forward progress. When parse_token/2 receives a non-token, non-whitespace, non-comma byte (e.g. !, @, =, ;), it returns the input unchanged. skip_comma/1 also returns the buffer unchanged when the first byte is not a comma. parse_entries/2 then recurses with identical data, creating a tight infinite tail-recursive loop that pins a scheduler at 100% CPU. The calling process never returns. The entry point parse_and_cache/3 is called synchronously in the connection process on every HTTP response. A single-byte Alt-Svc: ! response header is sufficient to trigger the hang; the header is fully controlled by any HTTP origin the client connects to. This issue affects hackney: from 2.0.0-beta.1 before 4.0.1.

benoitc

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

linux

In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786

linux

A vulnerability was determined in colinhacks Zod up to 4.3.6. The impacted element is an unknown function of the file packages/zod/src/v4/core/regexes.ts of the component CUID Data Type Handler. Executing a manipulation can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use scratch field in MMIO fragment to hold small write values When exiting to userspace to service an emulated MMIO write, copy the to-be-written value to a scratch field in the MMIO fragment if the size of the data payload is 8 bytes or less, i.e. can fit in a single chunk, instead of pointing the fragment directly at the source value. This fixes a class of use-after-free bugs that occur when the emulator initiates a write using an on-stack, local variable as the source, the write splits a page boundary, *and* both pages are MMIO pages. Because KVM's ABI only allows for physically contiguous MMIO requests, accesses that split MMIO pages are separated into two fragments, and are sent to userspace one at a time. When KVM attempts to complete userspace MMIO in response to KVM_RUN after the first fragment, KVM will detect the second fragment and generate a second userspace exit, and reference the on-stack variable. The issue is most visible if the second KVM_RUN is performed by a separate task, in which case the stack of the initiating task can show up as truly freed data. ================================================================== BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420 Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984 CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 check_memory_region+0xfd/0x1f0 memcpy+0x20/0x60 complete_emulated_mmio+0x305/0x420 kvm_arch_vcpu_ioctl_run+0x63f/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 RIP: 0033:0x42477d Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005 RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720 The buggy address belongs to the page: page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== The bug can also be reproduced with a targeted KVM-Unit-Test by hacking KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by overwrite the data value with garbage. Limit the use of the scratch fields to 8-byte or smaller accesses, and to just writes, as larger accesses and reads are not affected thanks to implementation details in the emulator, but add a sanity check to ensure those details don't change in the future. Specifically, KVM never uses on-stack variables for accesses larger that 8 bytes, e.g. uses an operand in the emulator context, and *al ---truncated---

linux

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly.

linux

In hackage-server, user-controlled metadata from .cabal files are rendered into HTML href attributes without proper sanitization, enabling stored Cross-Site Scripting (XSS) attacks.

hackage-server lacked Cross-Site Request Forgery (CSRF) protection across its endpoints. Scripts on foreign sites could trigger requests to hackage server, possibly abusing latent credentials to upload packages or perform other administrative actions. Some unauthenticated actions could also be abused (e.g. creating new user accounts).

A critical XSS vulnerability affected hackage-server and hackage.haskell.org. HTML and JavaScript files provided in source packages or via the documentation upload facility were served as-is on the main hackage.haskell.org domain. As a consequence, when a user with latent HTTP credentials browses to the package pages or documentation uploaded by a malicious package maintainer, their session can be hijacked to upload packages or documentation, amend maintainers or other package metadata, or perform any other action the user is authorised to do.

NEXULEAN is a cybersecurity portfolio & service platform for an Ethical Hacker, AI Enthusiast, and Penetration Tester. Prior to 2.0.0, a security vulnerability was identified where Firebase and Web3Forms API keys were exposed. An attacker could use these keys to interact with backend services without authentication, potentially leading to unauthorized access to application resources and user data. This vulnerability is fixed in 2.0.0.

Concrete CMS below version 9.4.8 is vulnerable to Remote Code Execution by stored PHP object injection into the Express Entry List block via the columns parameter. An authenticated administrator can store attacker-controlled serialized data in block configuration fields that are later passed to unserialize() without class restrictions or integrity checks. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 8.9 with vector CVSS:4.0/AV:N/AC:H/AT:P/PR:H/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H. Thanks YJK ( @YJK0805 https://hackerone.com/yjk0805 ) of ZUSO ART https://zuso.ai/  for reporting.

concretecms

# Active Storage allowed transformation methods potentially unsafe Active Storage attempts to prevent the use of potentially unsafe image transformation methods and parameters by default. The default allowed list contains three methods allow for the circumvention of the safe defaults which enables potential command injection vulnerabilities in cases where arbitrary user supplied input is accepted as valid transformation methods or parameters. Impact ------ This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor. Vulnerable code will look something similar to this: ``` <%= image_tag blob.variant(params[:t] => params[:v]) %> ``` Where the transformation method or its arguments are untrusted arbitrary input. All users running an affected release should either upgrade or use one of the workarounds immediately. Workarounds ----------- Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous. Strict validation of user supplied methods and parameters should be performed as well as having a strong [ImageMagick security policy](https://imagemagick.org/script/security-policy.php) deployed. Credits ------- Thank you [lio346](https://hackerone.com/lio346) for reporting this!

Out-of-bounds Read vulnerability in CloverHackyColor CloverBootloader (MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma modules). This vulnerability is associated with program files regparse.C. This issue affects CloverBootloader: before 5162.

Out-of-bounds Write vulnerability in CloverHackyColor CloverBootloader (MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma modules). This vulnerability is associated with program files regcomp.C. This issue affects CloverBootloader: before 5162.