Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a server may fail to notice that the server was not authenticated, because handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode is set. Impact summary: TLS and DTLS connections using raw public keys may be vulnerable to man-in-middle attacks when server authentication failure is not detected by clients. RPKs are disabled by default in both TLS clients and TLS servers. The issue only arises when TLS clients explicitly enable RPK use by the server, and the server, likewise, enables sending of an RPK instead of an X.509 certificate chain. The affected clients are those that then rely on the handshake to fail when the server's RPK fails to match one of the expected public keys, by setting the verification mode to SSL_VERIFY_PEER. Clients that enable server-side raw public keys can still find out that raw public key verification failed by calling SSL_get_verify_result(), and those that do, and take appropriate action, are not affected. This issue was introduced in the initial implementation of RPK support in OpenSSL 3.2. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

CreateWiki is an extension used at Miraheze for requesting & creating wikis. The name of requested wikis is not escaped on Special:RequestWikiQueue, so a user can insert arbitrary HTML that is displayed in the request wiki queue when requesting a wiki. If a wiki creator comes across the XSS payload, their user session can be abused to retrieve deleted wiki requests, which typically contains private information. Likewise, this can also be abused on those with the ability to suppress requests to view sensitive information. This issue has been patched with commit `693a220` and all users are advised to apply the patch. Users unable to upgrade should disable Javascript and/or prevent access to the vulnerable page (Special:RequestWikiQueue).

miraheze

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Free gadget structure only after freeing endpoints As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget().

linux

Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

openssl

OpenProject is open source project management software. Starting with version 7.4.0 and prior to version 12.5.4, when a user registers and confirms their first two-factor authentication (2FA) device for an account, existing logged in sessions for that user account are not terminated. Likewise, if an administrators creates a mobile phone 2FA device on behalf of a user, their existing sessions are not terminated. The issue has been resolved in OpenProject version 12.5.4 by actively terminating sessions of user accounts having registered and confirmed a 2FA device. As a workaround, users who register the first 2FA device on their account can manually log out to terminate all other active sessions. This is the default behavior of OpenProject but might be disabled through a configuration option. Double check that this option is not overridden if one plans to employ the workaround.

openproject

Git is an open-source distributed revision control system. In affected versions of Git a specially crafted repository that contains symbolic links as well as files using a clean/smudge filter such as Git LFS, may cause just-checked out script to be executed while cloning onto a case-insensitive file system such as NTFS, HFS+ or APFS (i.e. the default file systems on Windows and macOS). Note that clean/smudge filters have to be configured for that. Git for Windows configures Git LFS by default, and is therefore vulnerable. The problem has been patched in the versions published on Tuesday, March 9th, 2021. As a workaound, if symbolic link support is disabled in Git (e.g. via `git config --global core.symlinks false`), the described attack won't work. Likewise, if no clean/smudge filters such as Git LFS are configured globally (i.e. _before_ cloning), the attack is foiled. As always, it is best to avoid cloning repositories from untrusted sources. The earliest impacted version is 2.14.2. The fix versions are: 2.30.1, 2.29.3, 2.28.1, 2.27.1, 2.26.3, 2.25.5, 2.24.4, 2.23.4, 2.22.5, 2.21.4, 2.20.5, 2.19.6, 2.18.5, 2.17.62.17.6.

git-scm · fedoraproject · apple · debian

Dell EMC Isilon OneFS version 8.2.2 and Dell EMC PowerScale OneFS version 9.0.0 contains a buffer overflow vulnerability in the Likewise component. A remote unauthenticated malicious attacker may potentially exploit this vulnerability to cause a process restart.

dell

SQL injection vulnerability in lsassd in Lsass in the Likewise Security Authority in Likewise Open 5.4 through 6.1, and Likewise Enterprise 6.0, allows local users to execute arbitrary SQL commands via unspecified vectors.

likewise

lsassd in Likewise Open /Enterprise 5.3 before build 7845, Open 6.0 before build 8325, and Enterprise 6.0 before build 178, as distributed in VMware ESXi 4.1 and ESX 4.1 and possibly other products, allows remote attackers to cause a denial of service (daemon crash) via an Active Directory login attempt that provides a username containing an invalid byte sequence.

likewise · vmware

The pam_lsass library in Likewise Open 5.4 and CIFS 5.4 before build 8046, and 6.0 before build 8234, as used in HP StorageWorks X9000 Network Storage Systems and possibly other products, uses "SetPassword logic" when running as part of a root service, which allows remote attackers to bypass authentication for a Likewise Security Authority (lsassd) account whose password is marked as expired.

likewise