In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Reachable by an unprivileged user via a user+network namespace. Use the atomic sk_dst_reset() so the cache is cleared and released with a single xchg(): whichever side wins releases the dst once, the other sees NULL and does nothing. Behaviour is otherwise unchanged.

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: free fib_alias with kfree_rcu() on insert error path fib_table_insert() publishes new_fa into the leaf's fa_list with fib_insert_alias() before calling the fib entry notifiers. When a notifier fails, the error path removes new_fa with fib_remove_alias() (hlist_del_rcu) and frees it right away with kmem_cache_free(). fib_table_lookup() walks that list under rcu_read_lock() only, so a concurrent lookup that already reached new_fa keeps reading it after the free: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56 Triggering the error path needs CAP_NET_ADMIN and a registered fib notifier that can reject a route; a netdevsim device whose IPv4 FIB resource is exhausted is enough. Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already does for a fib_alias removed from the trie.

When API audit logging is enabled, the middleware reads the entire HTTP request body into memory without enforcing a size limit on login endpoints. Because the audit middleware is positioned earlier in the handler chain than Rancher's APIBodyLimitingHandler, the body-size cap (default 1 MiB) is bypassed for requests that pass through the audit copyReqBody path. An unauthenticated attacker can send arbitrarily large request bodies to the public login endpoints, causing the Rancher Manager server process to allocate memory proportional to the supplied body size. With just a few concurrent connections, this can exhaust available memory and terminate the Rancher Manager plane process, making the Rancher API and UI unavailable and interrupting management of all downstream clusters.

open62541 1.5.5 contains an out-of-bounds read in the client-side function responseReadNamespacesArray() in src/client/ua_client_connect.c.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the TCP message framing layer parses the Content-Length header using unsigned int arithmetic with no overflow check. When an attacker sends a Content-Length value that overflows unsigned int (e.g., 4294967296), the framing layer computes a wrapped-around value (e.g., 0) and splits the TCP stream at the wrong boundary, causing the body of the first SIP message to be processed as a separate message and enabling SIP message smuggling. Because Content-Length is parsed in the transport layer before authentication, an unauthenticated, network-based attacker can smuggle arbitrary SIP messages over any TCP-based transport (proto_tcp, proto_tls, proto_ws, proto_wss) on any instance with TCP enabled, with no routing-script preconditions. This allows smuggled messages to bypass front-end SBC/proxy security policies, inherit the connection's authentication context, and evade rate limiting. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.

Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. Prior to 0.11.0, Open WebUI resolved a hostname during URL validation and rejected private, loopback, and link-local addresses, but the HTTP clients resolved the hostname again at connection time. An authenticated attacker who controlled authoritative DNS for a submitted hostname could answer with a public address during validation and an internal one during connection, reaching cloud metadata, loopback admin APIs, or internal services through URL ingest, chat image_url fetches, image editing, or OAuth profile-picture fetches, with most paths returning the response to the attacker and the OAuth path forwarding the OAuth access token. This issue is fixed in 0.11.0.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, the POST /api/v1/oauth2-credential/refresh/:credentialId endpoint is included in WHITELIST_URLS and requires no authentication. The endpoint decrypts the stored credential, sends a refresh request to the configured OAuth provider with the client secret and refresh token, and returns the refreshed access_token in the response body. An attacker with a credential ID can use the token to access the victim's connected service and can also exhaust refresh-token quota. This issue is fixed in 3.1.3.

An improper certificate validation vulnerability was reported in multiple Lenovo XClarity Orchestrator (LXCO) 2.2.0 microservices that could allow an adjacent network attacker to intercept sensitive communications by performing a machine-in-the-middle attack against HTTPS connections during TLS certificate validation under certain circumstances.

A temporary file creation vulnerability in the Linux version of Lenovo XClarity Essentials OneCLI 5.5.0 and below could allow a local low-privileged attacker to overwrite or truncate arbitrary local files with program-generated data when OneCLI is executed with elevated privileges.

kotaemon through 0.12.0 contains an insecure deserialization vulnerability in the check_connection endpoint that allows unauthenticated attackers to instantiate arbitrary Python classes by supplying crafted YAML/JSON input with a __type__ field. Attackers can exploit this to override the __type__ field with subprocess.check_output and arbitrary arguments, achieving remote code execution with application process privileges.

The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass. The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a '.' or 'e'/'E' is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller. As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes. The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase. Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected. Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, and from 2.19.0 through 2.21.3, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. The 2.22.x and 3.2.x release lines are not affected: those branches were created after the fix commit landed on 2026-05-21 and therefore contain it from their initial releases (2.22.0, tagged 2026-06-03, and 3.2.0, tagged 2026-06-08).

Perspective 5.0.0 contains a denial of service vulnerability that allows remote attackers to block the server event loop indefinitely by submitting a crafted expression containing unbounded for or while loop constructs in a TableMakeViewReq message. Attackers can embed an arbitrarily large iteration count in an expression column evaluated once per table row, causing the Tornado IOLoop to block without any iteration cap, deadline, or cancellation check, rendering the server unresponsive to all connected clients.

The Bluetooth host ATT layer (subsys/bluetooth/host/att.c) associates each in-flight ATT TX buffer with its owning channel via the static tx_meta_data_storage[] array (data->att_chan = chan). When a buffer's last reference is dropped, its net-buf destroy callback defers the completion handling to the system workqueue (att_tx_destroy -> att_tx_destroy_work_handler -> att_on_sent_cb -> bt_att_sent), where bt_att_sent dereferences the channel and its ATT context (sys_slist_get(&att->reqs)). When a peer disconnects while an ATT PDU (a server notification/indication or any response) is still in flight in the controller TX path, L2CAP tears the channel down in l2cap_chan_del(): it runs the disconnected callback and then the released callback (bt_att_released), which frees the channel slab slot. Because the in-flight buffer is held by the connection TX path rather than the channel's own queue, its deferred destroy work can run after the channel has been freed. The att_on_sent_cb guard intended to drop the stale callback itself dereferences meta->att_chan, which is now a dangling pointer into a freed (and possibly reused) slab slot. A remote peer with an ATT connection can drive this by disconnecting during routine ATT traffic; no pairing or user interaction is required to reach the ATT bearer. The result is a use-after-free read/write of freed channel memory, reliably crashing the Bluetooth host (denial of service) and, because the channel slab slot may be reused, potentially corrupting live memory. The fix makes bt_att_released() NULL the att_chan field of every tx_meta_data_storage[] entry still referencing the channel before freeing it, so the deferred guard observes a NULL pointer and drops the callback. Teardown and the destroy work both run on the cooperative system workqueue, so the array update is serialized and needs no lock.

In Eclipse Milo versions 0.6.0 through 1.1.4, UASC server transport handlers fail to release retained partial message chunks when a channel disconnects, allowing a remote unauthenticated client to exhaust pooled direct memory by repeatedly sending incomplete chunks and disconnecting, potentially terminating the server.

The Easy Integration for Dropbox WordPress plugin before 2.2.0 does not perform authorization checks on several of its file-management AJAX actions that it also registers for unauthenticated users, allowing an unauthenticated attacker to list, download and upload arbitrary files across the connected Dropbox account and to read the connected account and administrator email addresses.

The MonsterInsights WordPress plugin before 11.1.0 does not correctly validate the signature on one of its unauthenticated AJAX actions: when the MonsterInsights WordPress plugin before 11.1.0 is not connected to Google Analytics the HMAC signing key is empty, which lets unauthenticated attackers forge a valid signature and overwrite a MonsterInsights WordPress plugin before 11.1.0 configuration value, disrupting the MonsterInsights WordPress plugin before 11.1.0's server-side analytics in Manual GA4 mode.

A flaw in Node.js HTTP client can cause a request desynchronization for Node.js-based forwarding proxies that rebuild outbound headers from the visible `IncomingMessage` headers while piping the original body to a reused backend connection. Node.js can omit headers beyond `maxHeadersCount` / `maxHeaderPairs` from `req.headers`, `req.rawHeaders`, and `req.headersDistinct`, while still using those omitted headers internally for HTTP message framing. In particular, `Content-Length` can be hidden from userland while the request body is still delivered. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

A vulnerability in Tenable Sensor Proxy allows a remote attacker to execute code with elevated privileges by inducing an operator to connect the sensor to an attacker-controlled host.

Guzzle is an extensible PHP HTTP client. Prior to 7.15.2 and 8.0.1, Guzzle gives a transport the request URI as text and supplies the Host header separately. The cURL handlers set CURLOPT_URL to the URI exactly as written and push that Host into CURLOPT_HTTPHEADER; StreamHandler does the same through fopen(). libcurl then parses the authority itself, percent-decoding it and, on an IDN-capable build, applying IDNA mapping, and uses the result to resolve, connect, name the TLS peer and address a proxy CONNECT, while the supplied Host suppresses the aligned one libcurl would have generated. For a URI host written as 127.0.0.%31, filter_var() rejects the host as an IP literal, yet libcurl decodes it to 127.0.0.1 and reaches loopback with no DNS lookup while the server receives Host: 127.0.0.%31. An attacker who influences a fetched URI can therefore reach a host the application's checks excluded and read whatever the host exposes of the response. The same divergence moves Guzzle's own decisions onto a spelling the transport does not use: no_proxy selects proxy routing from the literal host, and RedirectMiddleware decides from it whether to strip Authorization and Cookie. Exploitation requires the application to build a request URI from untrusted input and to make a host decision before handing it to Guzzle. This issue is fixed in versions 7.15.2 and 8.0.1.

Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. In versions prior to 2.22.0, an attacker can bypass the allowed hosts validation by omitting the Host header and supplying an X-Forwarded-Host header set to a whitelisted domain. The AllowedHostsMiddleware trusts the X-Forwarded-Host header as a fallback when the Host header is absent. Since X-Forwarded-Host is a client-controllable header, this enables host header injection attacks such as password reset poisoning, cache poisoning, and server-side request routing manipulation. Any application using AllowedHostsConfig is affected when deployed without a reverse proxy that strips X-Forwarded-Host, or when accepting HTTP/1.0 connections. This issue has been fixed in version 2.22.0.

ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1.

Improper restriction of intended endpoints in the RabbitMQ broker connection tools of the Amazon MQ MCP Server (awslabs.amazon-mq-mcp-server) before 2.0.24 may allow a remote unauthenticated actor (via prompt injection) to obtain Amazon MQ for RabbitMQ broker credentials or OAuth access tokens sent to a crafted endpoint controlled through a broker hostname introduced in the MCP client context. To remediate this issue, users should upgrade to version 2.0.24.