Versions of the package nice-select2 before 2.4.1 are vulnerable to Cross-site Scripting (XSS) via the <select> element. An attacker can supply a malicious payload that is rendered directly into the DOM without proper sanitization, causing arbitrary script execution in a victim’s browser when they view or interact with the affected page.

In the Linux kernel, the following vulnerability has been resolved: KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned() Drop a BUG_ON() that has been reachable since it was first added, way back in 2009, and instead use get_unaligned() to perform potentially-unaligned accesses. For a given store, KVM x86's emulator tracks the entire value in the destination operand, x86_emulate_ctxt.dst. If the destination is memory, and the target splits multiple pages and/or is emulated MMIO, then KVM handles each fragment independently. E.g. on a page split starting at page offset 0xffc, KVM writes 4 bytes to the first page, then the remaining bytes to the second page, using ctxt->dst as the source for both (with appropriate offsets). If the destination splits a page *and* hits emulated MMIO on the second page, then KVM will complete the write to the first page, then emulate the MMIO access to the second page. If there is a datamatch-enabled ioeventfd at offset 0 of the second page, then KVM will process the remainder of the store as a potential ioeventfd signal. Putting it all together, if the guest emits a store that splits a page starting at page offset N, and the second page has a datamatch-enabled ioeventfd at offset 0, then KVM will check for datamatch using &dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being 32-byte aligned, if N is not aligned to @len, the BUG_ON() fires. E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8, all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON() fires due to @val being 4-byte aligned, but not 8-byte aligned. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783! Oops: invalid opcode: 0000 [#1] SMP CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm] Call Trace: <TASK> __kvm_io_bus_write+0x85/0xb0 [kvm] kvm_io_bus_write+0x53/0x80 [kvm] vcpu_mmio_write+0x66/0xf0 [kvm] emulator_read_write_onepage+0x12a/0x540 [kvm] emulator_read_write+0x109/0x2b0 [kvm] x86_emulate_insn+0x4f8/0xfb0 [kvm] x86_emulate_instruction+0x181/0x790 [kvm] kvm_mmu_page_fault+0x313/0x630 [kvm] vmx_handle_exit+0x18a/0x590 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm] kvm_vcpu_ioctl+0x2d5/0x970 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0x890 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f19c931a9bf </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM x86 doesn't perform alignment checks on "normal" memory accesses at CPL0. Sadly, C99 ruins all the fun; while the x86 architecture plays nice, dereferencing an unaligned pointer directly is undefined behavior in C, e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y.

linux

In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.

linux

NiceGUI is a Python-based UI framework. Prior to 3.10.0, Since PurePosixPath only recognizes forward slashes (/) as path separators, an attacker can bypass this sanitization on Windows by using backslashes (\) in the upload filename. Applications that construct file paths using file.name (a pattern demonstrated in NiceGUI's bundled examples) are vulnerable to arbitrary file write on Windows. This vulnerability is fixed in 3.10.0.

zauberzeug · microsoft

In the Linux kernel, the following vulnerability has been resolved: af_unix: Give up GC if MSG_PEEK intervened. Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls.

linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too.

linux

NiceGUI is a Python-based UI framework. Prior to version 3.9.0, NiceGUI's app.add_media_file() and app.add_media_files() media routes accept a user-controlled query parameter that influences how files are read during streaming. The parameter is passed to the range-response implementation without validation, allowing an attacker to bypass chunked streaming and force the server to load entire files into memory at once. With large media files and concurrent requests, this can lead to excessive memory consumption, degraded performance, or denial of service. This issue has been patched in version 3.9.0.

zauberzeug

A vulnerability was determined in SourceCodester Simple and Nice Shopping Cart Script 1.0. This impacts an unknown function of the file /signup.php. This manipulation of the argument Username causes sql injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

haben-cs9

NiceGUI is a Python-based UI framework. Prior to version 3.8.0, several NiceGUI APIs that execute methods on client-side elements (`Element.run_method()`, `AgGrid.run_grid_method()`, `EChart.run_chart_method()`, and others) use an `eval()` fallback in the JavaScript-side `runMethod()` function. When user-controlled input is passed as the method name, an attacker can inject arbitrary JavaScript that executes in the victim's browser. Additionally, `Element.run_method()` and `Element.get_computed_prop()` used string interpolation instead of `json.dumps()` for the method/property name, allowing quote injection to break out of the intended string context. Version 3.8.0 contains a fix.

zauberzeug

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, &params, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue.

linux

NiceGUI is a Python-based UI framework. Prior to 3.7.0, NiceGUI's FileUpload.name property exposes client-supplied filename metadata without sanitization, enabling path traversal when developers use the pattern UPLOAD_DIR / file.name. Malicious filenames containing ../ sequences allow attackers to write files outside intended directories, with potential for remote code execution through application file overwrites in vulnerable deployment patterns. This design creates a prevalent security footgun affecting applications following common community patterns. Note: Exploitation requires application code incorporating file.name into filesystem paths without sanitization. Applications using fixed paths, generated filenames, or explicit sanitization are not affected. This vulnerability is fixed in 3.7.0.

zauberzeug

NiceGUI is a Python-based UI framework. The ui.markdown() component uses the markdown2 library to convert markdown content to HTML, which is then rendered via innerHTML. By default, markdown2 allows raw HTML to pass through unchanged. This means that if an application renders user-controlled content through ui.markdown(), an attacker can inject malicious HTML containing JavaScript event handlers. Unlike other NiceGUI components that render HTML (ui.html(), ui.chat_message(), ui.interactive_image()), the ui.markdown() component does not provide or require a sanitize parameter, leaving applications vulnerable to XSS attacks. This vulnerability is fixed in 3.7.0.

zauberzeug

HTML injection vulnerability in NICE Chat. This vulnerability allows an attacker to inject and render arbitrary HTML content in email transcripts by modifying the 'firstName' and 'lastName' parameters during a chat session. The injected HTML is included in the body of the email sent by the system, which could enable phishing attacks, impersonation, or credential theft.

NiceGUI is a Python-based UI framework. From versions v2.10.0 to 3.4.1, an unauthenticated attacker can exhaust Redis connections by repeatedly opening and closing browser tabs on any NiceGUI application using Redis-backed storage. Connections are never released, leading to service degradation when Redis hits its connection limit. NiceGUI continues accepting new connections - errors are logged but the app stays up with broken storage functionality. This issue has been patched in version 3.5.0.

zauberzeug

NiceGUI is a Python-based UI framework. From versions 2.22.0 to 3.4.1, an unsafe implementation in the pushstate event listener used by ui.sub_pages allows an attacker to manipulate the fragment identifier of the URL, which they can do despite being cross-site, using an iframe. This issue has been patched in version 3.5.0.

zauberzeug

NiceGUI is a Python-based UI framework. From versions 2.22.0 to 3.4.1, an unsafe implementation in the click event listener used by ui.sub_pages, combined with attacker-controlled link rendering on the page, causes XSS when the user actively clicks on the link. This issue has been patched in version 3.5.0.

zauberzeug

NiceGUI is a Python-based UI framework. From versions 2.13.0 to 3.4.1, there is a XSS risk in NiceGUI when developers pass attacker-controlled strings into ui.navigate.history.push() or ui.navigate.history.replace(). These helpers are documented as History API wrappers for updating the browser URL without page reload. However, if the URL argument is embedded into generated JavaScript without proper escaping, a crafted payload can break out of the intended string context and execute arbitrary JavaScript in the victim’s browser. Applications that do not pass untrusted input into ui.navigate.history.push/replace are not affected. This issue has been patched in version 3.5.0.

zauberzeug

In the Linux kernel, the following vulnerability has been resolved: net: stream: purge sk_error_queue in sk_stream_kill_queues() Changheon Lee reported TCP socket leaks, with a nice repro. It seems we leak TCP sockets with the following sequence: 1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket. Each ACK will cook an skb put in error queue, from __skb_tstamp_tx(). __skb_tstamp_tx() is using skb_clone(), unless SOF_TIMESTAMPING_OPT_TSONLY was also requested. 2) If the application is also using MSG_ZEROCOPY, then we put in the error queue cloned skbs that had a struct ubuf_info attached to them. Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc() does a sock_hold(). As long as the cloned skbs are still in sk_error_queue, socket refcount is kept elevated. 3) Application closes the socket, while error queue is not empty. Since tcp_close() no longer purges the socket error queue, we might end up with a TCP socket with at least one skb in error queue keeping the socket alive forever. This bug can be (ab)used to consume all kernel memory and freeze the host. We need to purge the error queue, with proper synchronization against concurrent writers.

In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix panic during XDP_TX with > 64 CPUs Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path.

NiceGUI is a Python-based UI framework. Versions 3.3.1 and below are vulnerable to directory traversal through the App.add_media_files() function, which allows a remote attacker to read arbitrary files on the server filesystem. This issue is fixed in version 3.4.0.

zauberzeug

In the Linux kernel, the following vulnerability has been resolved: dm: don't attempt to queue IO under RCU protection dm looks up the table for IO based on the request type, with an assumption that if the request is marked REQ_NOWAIT, it's fine to attempt to submit that IO while under RCU read lock protection. This is not OK, as REQ_NOWAIT just means that we should not be sleeping waiting on other IO, it does not mean that we can't potentially schedule. A simple test case demonstrates this quite nicely: int main(int argc, char *argv[]) { struct iovec iov; int fd; fd = open("/dev/dm-0", O_RDONLY | O_DIRECT); posix_memalign(&iov.iov_base, 4096, 4096); iov.iov_len = 4096; preadv2(fd, &iov, 1, 0, RWF_NOWAIT); return 0; } which will instantly spew: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 INFO: lockdep is turned off. CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x11d/0x1b0 __might_resched+0x3c3/0x5e0 ? preempt_count_sub+0x150/0x150 mempool_alloc+0x1e2/0x390 ? mempool_resize+0x7d0/0x7d0 ? lock_sync+0x190/0x190 ? lock_release+0x4b7/0x670 ? internal_get_user_pages_fast+0x868/0x2d40 bio_alloc_bioset+0x417/0x8c0 ? bvec_alloc+0x200/0x200 ? internal_get_user_pages_fast+0xb8c/0x2d40 bio_alloc_clone+0x53/0x100 dm_submit_bio+0x27f/0x1a20 ? lock_release+0x4b7/0x670 ? blk_try_enter_queue+0x1a0/0x4d0 ? dm_dax_direct_access+0x260/0x260 ? rcu_is_watching+0x12/0xb0 ? blk_try_enter_queue+0x1cc/0x4d0 __submit_bio+0x239/0x310 ? __bio_queue_enter+0x700/0x700 ? kvm_clock_get_cycles+0x40/0x60 ? ktime_get+0x285/0x470 submit_bio_noacct_nocheck+0x4d9/0xb80 ? should_fail_request+0x80/0x80 ? preempt_count_sub+0x150/0x150 ? lock_release+0x4b7/0x670 ? __bio_add_page+0x143/0x2d0 ? iov_iter_revert+0x27/0x360 submit_bio_noacct+0x53e/0x1b30 submit_bio_wait+0x10a/0x230 ? submit_bio_wait_endio+0x40/0x40 __blkdev_direct_IO_simple+0x4f8/0x780 ? blkdev_bio_end_io+0x4c0/0x4c0 ? stack_trace_save+0x90/0xc0 ? __bio_clone+0x3c0/0x3c0 ? lock_release+0x4b7/0x670 ? lock_sync+0x190/0x190 ? atime_needs_update+0x3bf/0x7e0 ? timestamp_truncate+0x21b/0x2d0 ? inode_owner_or_capable+0x240/0x240 blkdev_direct_IO.part.0+0x84a/0x1810 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 ? blkdev_read_iter+0x40d/0x530 ? reacquire_held_locks+0x4e0/0x4e0 ? __blkdev_direct_IO_simple+0x780/0x780 ? rcu_is_watching+0x12/0xb0 ? __mark_inode_dirty+0x297/0xd50 ? preempt_count_add+0x72/0x140 blkdev_read_iter+0x2a4/0x530 do_iter_readv_writev+0x2f2/0x3c0 ? generic_copy_file_range+0x1d0/0x1d0 ? fsnotify_perm.part.0+0x25d/0x630 ? security_file_permission+0xd8/0x100 do_iter_read+0x31b/0x880 ? import_iovec+0x10b/0x140 vfs_readv+0x12d/0x1a0 ? vfs_iter_read+0xb0/0xb0 ? rcu_is_watching+0x12/0xb0 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 do_preadv+0x1b3/0x260 ? do_readv+0x370/0x370 __x64_sys_preadv2+0xef/0x150 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5af41ad806 Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55 RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806 RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003 RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001 </TASK> where in fact it is ---truncated---

NiceGUI is a Python-based UI framework. Versions 3.3.1 and below are subject to a XSS vulnerability through the ui.interactive_image component of NiceGUI. The component renders SVG content using Vue's v-html directive without any sanitization. This allows attackers to inject malicious HTML or JavaScript via the SVG <foreignObject> tag whenever the image component is rendered or updated. This is particularly dangerous for dashboards or multi-user applications displaying user-generated content or annotations. This issue is fixed in version 3.4.0.

zauberzeug

NiceGUI is a Python-based UI framework. Versions 3.3.1 and below are vulnerable to Reflected XSS through its ui.add_css, ui.add_scss, and ui.add_sass functions. The functions lack proper sanitization or encoding for the JavaScript context they generate. An attacker can break out of the intended <style> or <script> tags by injecting closing tags (e.g., </style> or </script>), allowing for the execution of arbitrary JavaScript. This issue is fixed in version 3.4.0.

zauberzeug