In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix NULL-deref on adapter registration failure If adapter registration ever fails the release callback would trigger a NULL-pointer dereference as the completion struct has not been initialised. Note that before the offending commit this would instead have resulted in a minor memory leak of the adapter name.

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: kill anchored URBs before freeing netdevs esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reorder the teardown so the anchored URBs are killed before the netdevs are freed, matching other CAN/USB drivers in the same directory such as ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then free: unregister the netdevs first (which stops their TX queues), call unlink_all_urbs(dev) once, then free the netdevs. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown The Broadcom BDC UDC driver registers its IRQ handler with devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm only after bdc_remove() returns. devm releases resources in reverse LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() -> bdc_mem_free() manually before returning: bdc_udc_exit() tears down individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() -> bdc_mem_free() frees and NULLs the DMA-coherent status-report ring (bdc->srr.sr_bds) and kfree()s bdc->bdc_ep_array. Both happen while the IRQ handler (bdc_udc_interrupt, requested with IRQF_SHARED) remains deliverable in the window up to the post-remove devm free_irq(). On receipt of a shared interrupt in that window, bdc_udc_interrupt() dereferences bdc->srr.sr_bds[bdc->srr.dqp_index] (NULL or freed DMA) and dispatches sr_handler callbacks that index into bdc_ep_array, causing a NULL-deref or use-after-free. The same window affects the delayed_work bdc->func_wake_notify, which is armed from the IRQ handler via bdc_sr_uspc() -> handle_link_state_change() -> schedule_delayed_work() and may self-rearm from its own callback bdc_func_wake_timer(). No cancel exists anywhere in the driver, so a queued work item that fires after bdc_remove() returns and the bdc structure is devm-freed dereferences freed memory. Replace devm_request_irq() with request_irq() and add an explicit free_irq(bdc->irq, bdc) in bdc_remove(). Clear BDC_GIE before free_irq() to stop the device from asserting interrupts, then free_irq() drains any in-flight handler, then cancel_delayed_work_sync() drains the func_wake_notify delayed work. This ordering ensures the IRQ handler and delayed work cannot interfere with the subsequent endpoint and DMA teardown in bdc_udc_exit() and bdc_hw_exit(). Wire the matching free_irq() into the bdc_udc_init() error path so the IRQ is released on probe failure, and route the bdc_init_ep() failure through err0 instead of returning directly. This issue was found by an in-house static analysis tool.

A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination.

The system accepts authentication requests without sufficient validation to enforce tenant isolation when using Email OTP, SMS OTP, or Magic Link as first-factor authenticators. This failure to adequately separate user data between tenants can lead to the exposure of personally identifiable information. Successful exploitation allows an attacker to disclose personally identifiable information of users in different tenants, resulting in privacy violations and potential regulatory non-compliance. This may include unauthorized access to user details such as mobile numbers.

The Drag and Drop Multiple File Upload for WooCommerce WordPress plugin before 1.1.8 does not prevent unauthenticated users from obtaining a valid nonce that is the only control gating its file-deletion routine, allowing anonymous attackers to delete files staged in its upload directory and irreversibly destroy customers' pending order attachments.

The tourmaster WordPress plugin before 5.4.9 writes its order/booking export to a fixed, predictable file inside its publicly accessible directory with no access control, allowing unauthenticated users to download the exported customers' personal information once an administrator has run an export.

A vulnerability was detected in NousResearch hermes-agent up to 0.16.0. Affected by this issue is some unknown functionality of the file hermes-agent/model_tools.py of the component Memory Toolset. The manipulation results in improper access controls. The attack can be executed remotely. The exploit is now public and may be used.

The H5Z__nbit_decompress_one_byte, H5Z__nbit_decompress_one_nooptype, and H5Z__nbit_decompress_one_atomic functions in H5Znbit.c in HDF5 through 2.3.0 advance a read index into the compressed chunk buffer without bounding it against the buffer's actual size. This allows attackers to cause an out-of-bounds heap read, and in constrained cases disclosure of adjacent heap memory into decompressed dataset values, via a crafted HDF5 file whose N-Bit filter parameters describe more decompressed data than the stored compressed chunk actually contains, triggered via H5Dread, e.g. by the h5ls or h5repack tools.

Nuxt is an open-source web development framework for Vue.js. From 3.1.0 until 3.21.10 and 4.5.1, an unauthenticated attacker can use a server island v-for prop, including vforToArray and , to trigger unbounded SSR memory allocation until MAX_VFOR_LENGTH = 100000 and crash the Nuxt process. This issue is fixed in 3.21.10 and 4.5.1.

rclone is a command-line program to sync files and directories to and from different cloud storage providers. From v1.51.0 until v1.75.0, the local backend in backend/local/local.go relies on the configurable filename encoder to prevent remote filename data from becoming operating-system path syntax, so a local destination using Slash, None, Raw, or on Windows an encoding that preserves backslash can decode a standard-encoded fullwidth dot-dot component or native backslash form into an actual parent-directory component before filepath.Join resolves it outside the configured local root, allowing an attacker-controlled source object to create or overwrite files outside the selected destination directory as the rclone process. This issue is fixed in v1.75.0.

rclone is a command-line program to sync files and directories to and from different cloud storage providers. Prior to 1.75.0, the shared HTTP CONNECT helper in lib/proxy/http.go parses proxy CONNECT responses with http.ReadResponse over an unrestricted buffered reader, allowing a malicious or compromised configured proxy, or an active on-path actor controlling a plaintext HTTP proxy hop, to send oversized headers that grow memory until the rclone process fails. The affected helper is used by FTP and SFTP proxy connections, and SFTP reaches the parser before SSH server authentication, so target host key validation does not constrain a malicious proxy. This issue is fixed in 1.75.0.

rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.40.0 until 1.75.0, rclone serve restic does not correctly reject URL paths beginning with ../ in cmd/serve/restic/restic.go WithRemote, which accepts a leading parent path and passes it to GET, HEAD, POST, and DELETE handlers for configured backends including WebDAV, FTP, HTTP, Memory, and SFTP. An attacker who can access the REST endpoint may read, create, overwrite, or delete objects outside the path configured by the operator when the operator publishes a backend subdirectory and the backend credential can access parent or sibling objects. This issue is fixed in 1.75.0.

Spacebar Server before commit dcfd910 contains a missing authorization vulnerability that allows any authenticated attacker to add themselves to arbitrary group DM channels by sending a PUT request to the channels recipient endpoint without membership verification. Attackers can exploit the unguarded PUT /channels/{channel_id}/recipients/{user_id} handler to join private group DMs, read complete message history, post messages as a participant, and force-add third-party users without their consent.

boringproxy through 0.10.0 contains a resource exhaustion vulnerability that allows any authenticated user to permanently exhaust server file descriptors, goroutines, and memory by sending requests to the GET /loading endpoint with attacker-supplied id query parameter values. Because the handler performs no map-lookup validity check and receives on a nil channel that blocks forever, with no timeout, no context cancellation, and no server-side reclamation due to absent HTTP server timeouts, each malicious request permanently holds one goroutine, one file descriptor, and approximately 50 kB of memory until the server's file descriptor limit is reached and listener Accept calls fail, halting all tunnel traffic forwarding for all users.

Relative Path Traversal vulnerability in livebook-dev livebook allows an attacker-authored notebook to write a file with attacker-controlled content to an arbitrary path. A .livemd notebook can declare file_entries metadata, each entry carrying a name. Every path that creates a file entry through the user interface validates that name with Livebook.Notebook.validate_file_entry_name/2, which requires a flat filename of alphanumerics, dashes, underscores and dots, ending in an extension. The import path does not: Livebook.LiveMarkdown.Import.file_entry_metadata_to_attrs/1 in lib/livebook/live_markdown/import.ex takes the name verbatim from the notebook source. For a URL-type file entry, Livebook.Session.file_entry_cache_file/2 in lib/livebook/session.ex resolves that name beneath the session's temporary directory without checking that the result stays inside it, and Livebook.FileSystem.Utils.resolve_unix_like_path/2 collapses parent-directory segments while clamping only at the filesystem root. When the entry's content is requested and no cached copy exists, Livebook fetches the entry's URL and writes the response body to the resolved path, creating parent directories as needed. The attacker therefore controls both the destination and the contents of the written file, which may land anywhere the Livebook process can write. The same missing containment check is present in Livebook.Session.to_attachment_file_entry/2. A victim who opens an attacker-supplied notebook and causes the entry to be fetched triggers the write within their own authenticated session; the attacker needs no account on the target instance. URL-type entries are also not placed under notebook stamping quarantine on import, so no warning is shown. This issue affects livebook: from 0.11.0 before 0.18.7 and from 0.19.0 before 0.19.9.

Origin Validation Error vulnerability in livebook-dev livebook allows untrusted notebook output JavaScript to trigger session-wide keyboard shortcuts, including forced evaluation of all cells and runtime restart. Livebook's JS-view feature renders notebook-defined JavaScript inside a sandboxed, cross-origin iframe specifically because that JavaScript is untrusted. The trusted iframe shell in iframe/priv/static/iframe/v5.html forwards every keydown event fired in its own window to the parent page without consulting Event.isTrusted, so an event synthesized by the untrusted script through window.dispatchEvent is forwarded exactly as a genuine keystroke would be. The parent-side relay in assets/js/hooks/js_view.js reconstructs and re-dispatches it on the live page with no further validation, and because assets/js/hooks/session.js registers the global shortcut handler on the document in the capture phase, that handler acts on the replicated event regardless of how it was produced. Sandboxed output JavaScript can therefore drive Livebook's session-wide keyboard shortcuts. Two of them reach LivebookWeb.SessionLive and execute immediately with no confirmation: the shortcut for queueing full evaluation runs every cell in the notebook, and the shortcut for reconnecting the runtime disconnects and reconnects it, discarding in-memory state. A third shortcut deletes the focused cell behind a confirmation dialog that the user can permanently dismiss, after which it too executes silently. Forced full evaluation is the significant consequence, because it causes the notebook's own Elixir code to run without the user choosing to evaluate anything. A user who merely opens a notebook obtained from a third party, or reached from published documentation, can have its code executed on their runtime. Livebook also mirrors cell outputs to every connected client, so a malicious output triggers in a collaborator's browser as soon as it renders. This issue affects livebook: from 0.5.0 before 0.18.7 and from 0.19.0 before 0.19.9.

PraisonAI is a multi-agent teams system. In versions 3.9.26 through 4.6.57 of praiseonai and 0.12.12 through 1.6.57 of praiseonaiagents, the workflow "include" feature is vulnerable to code execution. Workflow._execute_include() implicitly imports and runs an included recipe's tools.py via a raw importlib.util.spec_from_file_location() and spec.loader.exec_module() call, without honoring the PRAISONAI_ALLOW_TEMPLATE_TOOLS/PRAISONAI_ALLOW_LOCAL_TOOLS autoload opt-in gates or routing through the centralized safe loader that protects the other tools.py autoload paths. As a result, a workflow that includes an attacker-controlled local recipe directory executes arbitrary module-level Python code during include setup, before any child workflow parsing or model call, and the same sink is reachable through the higher-level praisonai.recipe.run() recipe API. An attacker who can cause a victim process to run a workflow or recipe that includes an untrusted local recipe achieves arbitrary Python code execution as the PraisonAI process user, a variant that bypasses the hardening applied to the previously disclosed automatic tools.py RCE advisory family. This issue has been fixed in version 4.6.58 of praisonai and 1.6.58 of praisonaiagents.

Improper limitation of a pathname to a restricted directory in the get_resource tool in Amazon awslabs.aws-transform-mcp-server 0.1.0 through 0.1.4 might allow a context-dependent actor to write arbitrary files outside the intended working directory via the savePath parameter. To remediate this issue, users should upgrade to version 0.1.5 or later.

A path traversal vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to delete arbitrary files and directories on the instance, including the entire user storage directory containing Git LFS objects, release assets, attachments, and avatars. The X-GitHub-Request-Id request header was used without sanitization as a filesystem path segment for the upload buffer directory, so a traversal value pointed the buffer at an arbitrary path and the deferred cleanup routine recursively removed the traversed target. Exploitation required only network reachability to the instance and no authentication, and it worked even when private mode was enabled. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.21.4, 3.20.6, 3.19.10, 3.18.13 and 3.17.19. This vulnerability was reported via the GitHub Bug Bounty program.

IBM Langflow OSS 1.0.0 through 1.10.3 contain an authorization bypass vulnerability in the MemoryComponent that allows authenticated users to access chat history of other users via session_id collision. The MemoryComponent.retrieve_messages and store_message methods filter on session_id without validating flow_id or user_id ownership, enabling cross-user information disclosure through multiple authenticated API endpoints including /api/v1/run/*, /api/v1/responses, and /api/v2/workflow/*. This vulnerability only affects multi-user deployments with LANGFLOW_AUTO_LOGIN=False.

IBM Langflow OSS 1.0.0 through 1.10.3 does not properly validate the username field, allowing attackers to inject path traversal sequences and bypass containment checks. This enables multiple severe impacts, including arbitrary directory deletion, cross-tenant data destruction, and JWT signing key deletion leading to session invalidation.

PraisonAI is a multi-agent teams system. In versions prior to 4.6.40, the bundled Claude GitHub Actions workflow is vulnerable to command injection because it embeds an attacker-controlled pull request branch name into a Bash run: block without quoting or validation. Additionally, the workflow allows any @claude comment to trigger the job regardless of whether the commenter is a trusted collaborator. An outside contributor can open a pull request from a fork whose branch name contains shell metacharacters and comment @claude, causing Bash to execute arbitrary shell code in the GitHub Actions runner. Because these commands run in a job holding a GitHub App token with write permissions, OIDC access, and gh/git access, the injection can be chained through $GITHUB_PATH to compromise later privileged steps, enabling repository writes, pull request and issue manipulation, or OIDC-token abuse. This issue has been fixed in version 4.6.40.