In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths.

In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material.

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged.

Shopware is an open commerce platform. Prior to 6.6.10.18 and 6.7.10.1, the `/api/_action/media/external-link` endpoint allows authenticated admin users to make server-side HTTP HEAD requests to arbitrary internal IP addresses. While the parallel `uploadFromURL` flow validates target IPs against private/reserved ranges via `FileUrlValidator`, the `linkURL` flow only performs a URL format check (regex for `http://` or `https://` prefix), allowing SSRF to internal network services and cloud metadata endpoints. This issue is fixed in versions 6.6.10.18 and 6.7.10.1.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up.

In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set.

In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block" This reverts commit 9609dd704725a40cd63d915f2ab6c44248a44598. The kernel panics are keeping to be reported especially when the f2fs partition get almost full. By investigation, we find that the reason is one f2fs page got freed to buddy without being deleted from LRU and the root cause is the race happened in [2] which is enrolled by this commit. There are 3 race processes in this scenario, please find below for their main activities. The changed code in move_data_block() lets the GC path evict the tail-end folio from the page cache through folio_end_dropbehind(). Once folio_unmap_invalidate() removes the folio from mapping->i_pages, the page-cache references for all pages in the folio are dropped. The folio is then kept alive only by temporary external references, which allows a later split to operate on a folio whose subpages are no longer protected by page-cache references. After the page-cache references are gone, split_folio_to_order() can split the big folio into individual pages and put the resulting subpages back on the LRU. For tail pages beyond EOF, split removes them from the page cache and drops their page-cache references. A tail page can then remain on the LRU with PG_lru set while holding only the split caller's temporary reference. When free_folio_and_swap_cache() drops that final reference, the page enters the final folio_put() release path. In parallel, folio_isolate_lru() can observe the same tail page with a non-zero refcount and PG_lru set. It clears PG_lru before taking its own reference. If this races with the final folio_put() from the split path, __folio_put() sees PG_lru already cleared and skips lruvec_del_folio(). The page is then freed back to the allocator while its lru links are still present in the LRU list. A later LRU operation on a neighboring page detects the stale link and reports list corruption. [1] [ 22.486082] list_del corruption. next->prev should be fffffffec10e0ac8, but was dead000000000122. (next=fffffffec10e0a88) [ 22.486130] ------------[ cut here ]------------ [ 22.486134] kernel BUG at lib/list_debug.c:67! [ 22.486141] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 22.488502] Tainted: [W]=WARN, [O]=OOT_MODULE [ 22.488506] Hardware name: Spreadtrum UMS9230 1H10 SoC (DT) [ 22.488511] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 22.488517] pc : __list_del_entry_valid_or_report+0x14c/0x154 [ 22.488531] lr : __list_del_entry_valid_or_report+0x14c/0x154 [ 22.488539] sp : ffffffc08006b830 [ 22.488542] x29: ffffffc08006b868 x28: 0000000000003020 x27: 0000000000000000 [ 22.488553] x26: 0000000000000000 x25: 0000000000000004 x24: fffffffec10e0ac0 [ 22.488564] x23: 00000000000000e8 x22: 0000000000000024 x21: dead000000000122 [ 22.488574] x20: fffffffec10e0a88 x19: fffffffec10e0ac8 x18: ffffffc080061060 [ 22.488585] x17: 20747562202c3863 x16: 6130653031636566 x15: 0000000000000058 [ 22.488595] x14: 0000000000000004 x13: ffffff80f91e0000 x12: 0000000000000003 [ 22.488605] x11: 0000000000000003 x10: 0000000000000001 x9 : ffe85721f0e25f00 [ 22.488615] x8 : ffe85721f0e25f00 x7 : 0000000000000000 x6 : 6c65645f7473696c [ 22.488625] x5 : ffffffed39b23026 x4 : 0000000000000000 x3 : 0000000000000010 [ 22.488636] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000006d [ 22.488647] Call trace: [ 22.488651] __list_del_entry_valid_or_report+0x14c/0x154 (P) [ 22.488661] __folio_put+0x2bc/0x434 [ 22.488670] folio_put+0x28/0x58 [ 22.488678] do_garbage_collect+0x1a34/0x2584 [ 22.488689] f2fs_gc+0x230/0x9b4 [ 22.488697] f2fs_fallocate+0xb90/0xdf4 [ 22.488706] vfs_fallocate+0x1b4/0x2bc [ 22.488716] __arm64_sys_fallocate+0x44/0x78 [ 22.488725] invoke_syscall+0x58/0xe4 [ 22.488732] do_el0_svc+0x48/0xdc [ 22.488739] el0 ---truncated---

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. Prior to 3.7.15 and 4.0.6, the allow-list fix for CVE-2026-31892 is incomplete because workflow/util/merge.go ValidateUserOverrides and SanitizeUserWorkflowSpec walk only the top-level fields of WorkflowSpec via reflection, and WorkflowSpec.ArtifactGC is allow-listed wholesale; the struct behind that field, WorkflowLevelArtifactGC, has a PodSpecPatch sub-field whose contents flow unmodified into util.ApplyPodSpecPatch on the artifact-GC pod, the same sink the original fix closed for WorkflowSpec.PodSpecPatch, so a user submitting a Workflow under templateReferencing: Strict or Secure (against a referenced WorkflowTemplate that declares an output artifact and setting spec.artifactGC.strategy: OnWorkflowCompletion) can still inject an arbitrary strategic merge patch into the artifact-GC pod, including hostPath volumes, privileged: true, arbitrary image and command, and hostNetwork: true, defeating the stated purpose of Strict/Secure reference mode. This issue is fixed in versions 3.7.15 and 4.0.6.

argoproj

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture.

linux

In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free().

linux

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: only purge non-released claims When batadv_bla_purge_claims() goes through the list of claims, it is only traversing the hash list with an rcu_read_lock(). Due to a potential parallel batadv_claim_put(), it can happen that it encounters a claim which was actually in the process of being released+freed by batadv_claim_release(). In this case, backbone_gw is set to NULL before the delayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() is then no longer allowed because it would cause a NULL-ptr derefence. To avoid this, only claims with a valid reference counter must be purged. All others are already taken care of.

linux

In the Linux kernel, the following vulnerability has been resolved: media: iris: fix use-after-free of fmt_src during MBPF check During concurrency testing, multiple instances can run in parallel, and each instance uses its own inst->lock while the core->lock protects the list of active instances. The race happens because these locks cover different scopes, inst->lock protects only the internals of a single instance, while the Macro Blocks Per Frame (MBPF) checker walks the core list under core->lock and reads fields like fmt_src->width and fmt_src->height. At the same time, iris_close() may free fmt_src and fmt_dst under inst->lock while the instance is still present in the core list. This allows a situation where the MBPF checker, still iterating through the core list, reaches an instance whose fmt_src was already freed by another thread and ends up dereferencing a dangling pointer, resulting in a use-after-free. This happens because the MBPF checker assumes that any instance in the core list is fully valid, but the freeing of fmt_src and fmt_dst without removing the instance from the core list is not correct. The correct ordering is to defer freeing fmt_src and fmt_dst until after the instance has been removed from the core list and all teardown under the core lock has completed, ensuring that no dangling pointers are ever exposed during MBPF checks.

linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result.

linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_counter: serialize reset with spinlock Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later.

linux

The adjustments made for XSA-379 as well as those subsequently becoming XSA-387 still left a race window, when a HVM or PVH guest does a grant table version change from v2 to v1 in parallel with mapping the status page(s) via XENMEM_add_to_physmap. Some of the status pages may then be freed while mappings of them would still be inserted into the guest's secondary (P2M) page tables.

xen

Imager versions through 1.030 for Perl allow a heap out of bounds (OOB) write on crafted multi-frame GIF files. Imager::File::GIF's i_readgif_multi_low allocates a single per-row buffer GifRow sized for the GIF's global screen width 'SWidth' and reuses it across every image in the file. The page-match branch validates Image.Width + Image.Left > SWidth before each DGifGetLine write, but the parallel skip-image branch at imgif.c:790-805 calls DGifGetLine(GifFile, GifRow, Width) with no such check.

Imager::File::GIF versions through 1.002 for Perl allow a heap out of bounds (OOB) write on crafted multi-frame GIF files. Imager::File::GIF's i_readgif_multi_low allocates a single per-row buffer GifRow sized for the GIF's global screen width 'SWidth' and reuses it across every image in the file. The page-match branch validates Image.Width + Image.Left > SWidth before each DGifGetLine write, but the parallel skip-image branch at imgif.c:790-805 calls DGifGetLine(GifFile, GifRow, Width) with no such check.

tonyc

SQL injection vulnerability in pgAdmin 4 Maintenance Tool. Four user-supplied JSON fields (buffer_usage_limit, vacuum_parallel, vacuum_index_cleanup, reindex_tablespace) were concatenated directly into the rendered VACUUM/ANALYZE/REINDEX command and passed to psql --command. An authenticated user with the tools_maintenance permission could break out of the option syntax and execute arbitrary SQL on the connected PostgreSQL server. The injected SQL could in turn invoke COPY ... TO PROGRAM to escalate to operating-system command execution on the database host. Fix introduces server-side allow-listing of all four fields and switches reindex_tablespace from manual quoting to the qtIdent filter. This issue affects pgAdmin 4: before 9.15.

pgadmin

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From version 4.0.0 to before version 4.0.5, the Sync Service's ConfigMap-backed provider (server/sync/sync_cm.go) performs zero authorization checks on all CRUD operations (create, read, update, delete). Any authenticated user — including those using fake Bearer tokens — can create, read, update, and delete Kubernetes ConfigMaps containing synchronization limits. This issue has been patched in version 4.0.5.

argoproj

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. Prior to versions 3.7.14 and 4.0.5, a user with create Workflow permission can bypass templateReferencing: Strict to get host network access, switch service accounts, override pod security context, add tolerations to schedule on control-plane nodes, or enable SA token mounting. This defeats the stated purpose of the feature. The practical impact depends on what Kubernetes-level controls are in place. Clusters with PodSecurity admission or OPA/Gatekeeper would independently block some of these (like hostNetwork). Clusters that rely on Argo's Strict mode as the primary enforcement layer are fully exposed. This issue has been patched in versions 3.7.14 and 4.0.5.

argoproj