Apache Traffic Server forwards HTTP/2 origin trailers to HTTP/1 clients without proper chunked framing when converting HTTP/2 to HTTP/1. This issue affects Apache Traffic Server: from 10.0.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue.

apache

Apache Traffic Server can be crashed or driven to resource exhaustion by abusive HTTP/2 framing and flow-control. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue.

apache

tiny-http through 0.12.0 contains an HTTP request smuggling vulnerability that allows remote attackers to desynchronize request framing by sending a Transfer-Encoding header with any value, including non-chunked codings, which causes the library to unconditionally apply chunk-decoding and discard Content-Length. Attackers can exploit the discrepancy between tiny_http's improper Transfer-Encoding parsing and a correctly-implemented front-end proxy to produce two distinct interpretations of a single byte stream, enabling request smuggling, and can additionally send non-chunked bodies with non-chunked Transfer-Encoding values to cause failed body reads that tie up connections and consume worker threads without signaling errors to clients.

In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code. As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target. An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral. The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.

### Summary `qs.stringify` throws `TypeError` when called with `arrayFormat: 'comma'` and `encodeValuesOnly: true` on an array containing `null` or `undefined`. The throw is synchronous and not handled by any of qs's null-related options (`skipNulls`, `strictNullHandling`). ### Details In the comma + `encodeValuesOnly` branch, `lib/stringify.js:145` mapped the array through the raw encoder before joining: ```js obj = utils.maybeMap(obj, encoder); ``` `utils.encode` (`lib/utils.js:195`) reads `str.length` with no null guard, so a `null` or `undefined` element throws `TypeError`. `skipNulls` and `strictNullHandling` are both checked in the per-element loop below this line and never get a chance to run. Same class of bug as the filter-array path fixed in 0c180a4. The vulnerable shape of the comma + `encodeValuesOnly` branch was introduced in 4c4b23d ("encode comma values more consistently", PR #463, 2023-01-19), first released in v6.11.1. #### PoC ```js const qs = require('qs'); qs.stringify({ a: [null, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [undefined, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [null] }, { arrayFormat: 'comma', encodeValuesOnly: true }); // TypeError: Cannot read properties of null (reading 'length') // at encode (lib/utils.js:195:13) // at Object.maybeMap (lib/utils.js:322:37) // at stringify (lib/stringify.js:145:25) ``` #### Fix `lib/stringify.js:145`, applied in 21f80b3 on `main` and released as v6.15.2: ```diff - obj = utils.maybeMap(obj, encoder); + obj = utils.maybeMap(obj, function (v) { + return v == null ? v : encoder(v); + }); ``` `null` and `undefined` now pass through `maybeMap` unchanged and reach the `join(',')` step as-is. For `{ a: [null, 'b'] }` this produces `a=,b`, matching the non-`encodeValuesOnly` comma path (which already joins before encoding and produces `a=%2Cb` for the same input). Single-element `[null]` arrays still collapse via the existing `obj.join(',') || null` and remain subject to `skipNulls` / `strictNullHandling` in the main loop. ### Affected versions `>=6.11.1 <6.15.2` — fixed in v6.15.2. The vulnerable code shape was introduced in 4c4b23d and first shipped in v6.11.1. Earlier versions — including all of 6.7.x, 6.8.x, 6.9.x, 6.10.x, and 6.11.0 — implemented the comma + `encodeValuesOnly` path differently (joining before encoding) and are not affected. Empirically verified across released versions. ### Impact Application code that calls `qs.stringify` with both `arrayFormat: 'comma'` and `encodeValuesOnly: true` (both non-default) on input that may contain a `null` or `undefined` array element will throw synchronously instead of producing a query string. In a typical Node.js HTTP framework (Express, Fastify, Koa, hapi) the sync throw is caught by the framework's error boundary and the affected request returns a 500; the worker process does not exit and subsequent requests are unaffected. The "kills the worker process" framing applies only to call sites outside a request-handler error boundary (background jobs, startup paths, stream pipelines) or to deployments with framework error handling explicitly disabled. The vulnerable input is a `null` or `undefined` entry inside an array; this is reachable from JSON request bodies or from application code constructing arrays from user input, but not from standard HTML form submissions (which produce strings or omitted fields, not literal `null`).

In Paramiko through 4.0.0 before a448945, rsakey.py allows the SHA-1 algorithm.

Inconsistent Interpretation of HTTP Requests vulnerability in mtrudel bandit allows HTTP request smuggling via duplicate Content-Length headers. 'Elixir.Bandit.Headers':get_content_length/1 in lib/bandit/headers.ex uses List.keyfind/3, which returns only the first matching header. When a request contains two Content-Length headers with different values, Bandit silently accepts it, uses the first value to read the body, and dispatches the remaining bytes as a second pipelined request on the same keep-alive connection. RFC 9112 §6.3 requires recipients to treat this as an unrecoverable framing error. When Bandit sits behind a proxy that picks the last Content-Length value and forwards the request rather than rejecting it, an unauthenticated attacker can smuggle requests past edge WAF rules, path-based ACLs, rate limiting, and audit logging. This issue affects bandit: before 1.11.0.

Apache Log4j Core's Rfc5424Layout https://logging.apache.org/log4j/2.x/manual/layouts.html#RFC5424Layout , in versions 2.21.0 through 2.25.3, is vulnerable to log injection via CRLF sequences due to undocumented renames of security-relevant configuration attributes. Two distinct issues affect users of stream-based syslog services who configure Rfc5424Layout directly: * The newLineEscape attribute was silently renamed, causing newline escaping to stop working for users of TCP framing (RFC 6587), exposing them to CRLF injection in log output. * The useTlsMessageFormat attribute was silently renamed, causing users of TLS framing (RFC 5425) to be silently downgraded to unframed TCP (RFC 6587), without newline escaping. Users of the SyslogAppender are not affected, as its configuration attributes were not modified. Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue.

apache

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Files#fail sets the Content-Length response header using String#size instead of String#bytesize. When the response body contains multibyte UTF-8 characters, the declared Content-Length is smaller than the number of bytes actually sent on the wire. Because Rack::Files reflects the requested path in 404 responses, an attacker can trigger this mismatch by requesting a non-existent path containing percent-encoded UTF-8 characters. This results in incorrect HTTP response framing and may cause response desynchronization in deployments that rely on the incorrect Content-Length value. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

rack

An HTTP Request Smuggling vulnerability (CWE-444) has been found in Pingora's parsing of HTTP/1.0 and Transfer-Encoding requests. The issue occurs due to improperly allowing HTTP/1.0 request bodies to be close-delimited and incorrect handling of multiple Transfer-Encoding values, allowing attackers to send HTTP/1.0 requests in a way that would desync Pingora’s request framing from backend servers’. Impact This vulnerability primarily affects standalone Pingora deployments in front of certain backends that accept HTTP/1.0 requests. An attacker could craft a malicious payload following this request that Pingora forwards to the backend in order to: * Bypass proxy-level ACL controls and WAF logic * Poison caches and upstream connections, causing subsequent requests from legitimate users to receive responses intended for smuggled requests * Perform cross-user attacks by hijacking sessions or smuggling requests that appear to originate from the trusted proxy IP Cloudflare's CDN infrastructure was not affected by this vulnerability, as its ingress proxy layers forwarded HTTP/1.1 requests only, rejected ambiguous framing such as invalid Content-Length values, and forwarded a single Transfer-Encoding: chunked header for chunked requests. Mitigation: Pingora users should upgrade to Pingora v0.8.0 or higher that fixes this issue by correctly parsing message length headers per RFC 9112 and strictly adhering to more RFC guidelines, including that HTTP request bodies are never close-delimited. As a workaround, users can reject certain requests with an error in the request filter logic in order to stop processing bytes on the connection and disable downstream connection reuse. The user should reject any non-HTTP/1.1 request, or a request that has invalid Content-Length, multiple Transfer-Encoding headers, or Transfer-Encoding header that is not an exact “chunked” string match.

cloudflare

Akamai Ghost on Akamai CDN edge servers before 2026-02-06 mishandles processing of custom hop-by-hop HTTP headers, where an incoming request containing the header "Connection: Transfer-Encoding" could result in a forward request with invalid message framing, depending on the Akamai processing path. This could result in the origin server parsing the request body incorrectly, leading to HTTP request smuggling.

WeGIA is a web manager for charitable institutions. Prior to 3.6.2, The web application is vulnerable to clickjacking attacks. The WeGIA application does not send any defensive HTTP headers related to framing protection. In particular, X-Frame-Options is missing andContent-Security-Policy with frame-ancestors directive is not configured. Because of this, an attacker can load any WeGIA page inside a malicious HTML document, overlay deceptive elements, hide real buttons, or force accidental interaction with sensitive workflows. This vulnerability is fixed in 3.6.2.

wegia

In the Linux kernel, the following vulnerability has been resolved: char: applicom: fix NULL pointer dereference in ac_ioctl Discovered by Atuin - Automated Vulnerability Discovery Engine. In ac_ioctl, the validation of IndexCard and the check for a valid RamIO pointer are skipped when cmd is 6. However, the function unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the end. If cmd is 6, IndexCard may reference a board that does not exist (where RamIO is NULL), leading to a NULL pointer dereference. Fix this by skipping the readb access when cmd is 6, as this command is a global information query and does not target a specific board context.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Chibueze Okechukwu SEO Pyramid seo-pyramid allows Reflected XSS.This issue affects SEO Pyramid: from n/a through <= 1.9.8.

In the Linux kernel, the following vulnerability has been resolved: of/fdt: run soc memory setup when early_init_dt_scan_memory fails If memory has been found early_init_dt_scan_memory now returns 1. If it hasn't found any memory it will return 0, allowing other memory setup mechanisms to carry on. Previously early_init_dt_scan_memory always returned 0 without distinguishing between any kind of memory setup being done or not. Any code path after the early_init_dt_scan memory call in the ramips plat_mem_setup code wouldn't be executed anymore. Making early_init_dt_scan_memory the only way to initialize the memory. Some boards, including my mt7621 based Cudy X6 board, depend on memory initialization being done via the soc_info.mem_detect function pointer. Those wouldn't be able to obtain memory and panic the kernel during early bootup with the message "early_init_dt_alloc_memory_arch: Failed to allocate 12416 bytes align=0x40".

linux

Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Rami Yushuvaev Site Info site-info-dashboard-widget allows Retrieve Embedded Sensitive Data.This issue affects Site Info: from n/a through <= 1.1.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

linux

In the Linux kernel, the following vulnerability has been resolved: brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path.

linux

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in RaminMT Links/Problem Reporter report-broken-links allows Reflected XSS.This issue affects Links/Problem Reporter: from n/a through <= 2.6.0.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Rami Yushuvaev Pastebin pastebin-embed allows Stored XSS.This issue affects Pastebin: from n/a through <= 1.5.