An authenticated format string vulnerability exists in the ONVIF service of Tapo C110 v2 due to improper handling of user-controlled input.  Externally controlled data is interpreted as a format string, which can be used to manipulate stack memory, including control flow data such as return addresses. A remote authenticated attacker may redirect execution flow to existing internal functions, triggering an unauthorized factory reset, leading to loss of configuration, deletion of stored credentials and service disruption.

TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization.  An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. D100C is the chime delivered with your Tapo camera, and it is delivered with the following Tapo products: D130, D210, D235, D225, TD21, TDB21 and TD25

A denial-of-service vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP request path parsing logic. The implementation enforces length restrictions on the raw request path but does not account for path expansion performed during normalization. An attacker on the adjacent network may send a crafted HTTP request to cause buffer overflow and memory corruption, leading to system interruption or device reboot.

tp-link

A stack-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within a configuration handling component due to insufficient input validation. An attacker can exploit this vulnerability by supplying an excessively long value for a vulnerable configuration parameter, resulting in a stack overflow. Successful exploitation results in Denial-of-Service (DoS) condition, leading to a service crash or device reboot, impacting availability.

tp-link

An authentication bypass vulnerability within the HTTP handling of the DS configuration service in TP-Link Tapo C520WS v2.6 was identified, due to inconsistent parsing and authorization logic in JSON requests during authentication check. An unauthenticated attacker can append an authentication-exempt action to a request containing privileged DS do actions, bypassing authorization checks. Successful exploitation allows unauthenticated execution of restricted configuration actions, which may result in unauthorized modification of device state.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within the asynchronous parsing of local video stream content due to insufficient alignment and validation of buffer boundaries when processing streaming inputs.An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP parsing loop when appending segmented request bodies without continuous write‑boundary verification, due to insufficient boundary validation when handling externally supplied HTTP input.  An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input.  An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries.  Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.

tp-link

IBM DataPower Gateway 10.6CD 10.6.1.0 through 10.6.5.0 and IBM DataPower Gateway 10.5.0 10.5.0.0 through 10.5.0.20 and IBM DataPower Gateway 10.6.0 10.6.0.0 through 10.6.0.8 IBM DataPower Gateway is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts.

ibm

IBM DataPower Gateway 10.6CD 10.6.1.0 through 10.6.5.0 and IBM DataPower Gateway 10.5.0 10.5.0.0 through 10.5.0.20 and IBM DataPower Gateway 10.6.0 10.6.0.0 through 10.6.0.8 IBM DataPower Gateway could disclose sensitive system information from other domains to an administrative user.

ibm

In the Linux kernel, the following vulnerability has been resolved: ceph: fix oops due to invalid pointer for kfree() in parse_longname() This fixes a kernel oops when reading ceph snapshot directories (.snap), for example by simply running `ls /mnt/my_ceph/.snap`. The variable str is guarded by __free(kfree), but advanced by one for skipping the initial '_' in snapshot names. Thus, kfree() is called with an invalid pointer. This patch removes the need for advancing the pointer so kfree() is called with correct memory pointer. Steps to reproduce: 1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase) 2. Add cephfs mount to fstab $ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab 3. Reboot the system $ systemctl reboot 4. Check if it's really mounted $ mount | grep stuff 5. List snapshots (expected 63 snapshots on my system) $ ls /mnt/test/stuff/.snap Now ls hangs forever and the kernel log shows the oops.

linux

On TP-Link Tapo C260 v1 and D235 v1, a guest‑level authenticated user can bypass intended access restrictions by sending crafted requests to a synchronization endpoint. This allows modification of protected device settings despite limited privileges. An attacker may change sensitive configuration parameters without authorization, resulting in unauthorized device state manipulation but not full code execution.

tp-link

On TP-Link Tapo C260 v1, command injection vulnerability exists due to improper sanitization in certain POST parameters during configuration synchronization. An authenticated attacker can execute arbitrary system commands with high impact on confidentiality, integrity and availability. It may cause full device compromise.

tp-link

A path traversal vulnerability was identified TP-Link Tapo C260 v1, D235 v1, C211 v2 and C520WS v2.6 within the HTTP server’s handling of GET requests. The server performs path normalization before fully decoding URL encoded input and falls back to using the raw path when normalization fails. An attacker can exploit this logic flaw by supplying crafted, URL encoded traversal sequences that bypass directory restrictions and allow access to files outside the intended web root. Successful exploitation may allow authenticated attackers to get disclosure of sensitive system files and credentials, while unauthenticated attackers may gain access to non-sensitive static assets.

tp-link

An Improper Certificate Validation vulnerability in TP-Link Tapo H100 v1 and Tapo P100 v1 allows an on-path attacker on the same network segment to intercept and modify encrypted device-cloud communications.  This may compromise the confidentiality and integrity of device-to-cloud communication, enabling manipulation of device data or operations.

tp-link

By sending crafted files to the firmware update endpoint of Tapo C220 v1 and C520WS v2, the device terminates core system services before verifying authentication or firmware integrity. An unauthenticated attacker can trigger a persistent denial of service, requiring a manual reboot or application initiated restart to restore normal device operation.

tp-link

The HTTP parser of Tapo C210 v3, C220 v1 and C520WS v2 cameras improperly handles requests containing an excessively long URL path. An invalid‑URL error path continues into cleanup code that assumes allocated buffers exist, leading to a crash and service restart. An unauthenticated attacker can force repeated service crashes or device reboots, causing denial of service.

tp-link

The Tapo C100 v5, C220 v1 and C520WS v2 cameras’ HTTP service does not safely handle POST requests containing an excessively large Content-Length header. The resulting failed memory allocation triggers a NULL pointer dereference, causing the main service process to crash. An unauthenticated attacker can repeatedly crash the service, causing temporary denial of service. The device restarts automatically, and repeated requests can keep it unavailable.

tp-link

Multiple hardcoded credentials have been identified, which are allowed to sign-in to the exos 9300 datapoint server running on port 1004 and 1005. This server is used for relaying status information from and to the Access Managers. This information, among other things, is used to graphically visualize open doors and alerts. However, controlling the Access Managers via this interface is also possible. To send and receive status information, authentication is necessary. The Kaba exos 9300 application contains hard-coded credentials for four different users, which are allowed to login to the datapoint server and receive as well as send information, including commands to open arbitrary doors.

A stack-based buffer overflow vulnerability was identified in the ONVIF SOAP XML Parser in Tapo C200 v3 and C520WS v2.6. When processing XML tags with namespace prefixes, the parser fails to validate the prefix length before copying it to a fixed-size stack buffer. It allowed a crafted SOAP request with an oversized namespace prefix to cause memory corruption in stack. An unauthenticated attacker on the same local network may exploit this flaw to enable remote code execution with elevated privileges, leading to full compromise of the device.

tp-link

The HTTPS service on Tapo C200 V3 exposes a connectAP interface without proper authentication. An unauthenticated attacker on the same local network segment can exploit this to modify the device’s Wi-Fi configuration, resulting in loss of connectivity and denial-of-service (DoS).

tp-link